Installation box for underfloor-installation

SET PORTAMECANISMOS GESR4 U 7011

GESR4 service outlet with handle clamp. Service outlet with handle clamp for up to 6 individual Modul 45 devices in 2 UT3 universal supports, use in duct systems and system floors for indoor use.Service outlet with handle clamp, 2-compartment, for the installation of MT4 mounting support. Two type APMT2 cover plates can be installed.

Service outlet for duct mounting, Iron grey, 7011, Polyamide, PA

Service outlet, round, for screed height 55 mm. GESR9 service outlet with a fixed construction height of 55 mm for indoor use. With two fitted plug housings for vertical mounting of Modul 45 devices and four strain reliefs. Two installation frames are required to mount Modul 45 devices.The data modules are mounted using an optional mounting plate MPMT45. The service outlet is equipped with universal fastening brackets.

Service outlet for universal mounting, Stainless steel, grade 304, VA, 1.4301

GES6M-2 service outlet with handle clamp. Service outlet with handle clamp for up to 9 individual Modul 45 devices in 3 UT3 universal supports, use in trunking systems and system floors for indoor use.Locking ladder made of galvanised sheet steel. The floor covering thickness is set to 5 mm, adjustable to 10 mm if necessary. Service outlet with handle clamp, 3-compartment, for the installation of MT6 mounting support. Three type APMT2 cover plates can be installed.

Service outlet, complete with protective contact socket, Stainless steel, grade 304, VA, 1.4301

UDHOME4 floor box, with universal support UT3 45 3, triple VDE, stainless steel. Square floor box for use in dry-cleaned cavity and screed floors in indoor areas. Installation housing with pre-marked insertion openings for pipes (M25). With two UT3 45 3 universal supports and a triple protective contact socket. Cover adjustable to top edge of floor covering using four height-adjustment supports. The minimum installation depth is 95 mm, the height-adjustment range + 30 mm.Surfaces made of stainless steel and visible in the floor covering.

Set portamec., Mount canal, gray iron, 7011, Polyamide, PA

Mec holder set. GES2 KU 7011, for recessed Polyamide, PA,

GES2 with MT3 45. Mechanism unit with all the system accessories required for floor mounting. The scope of delivery includes a nominal size 2 mechanism holder with universal clamping angle and a modular holder for 3 Modul 45 mechanisms. Mechanism holder unit with carpet protective frames, hinged lid and polyamide-based cable outlet, in RAL 7011 colour. The hinged lid has a recess to place a final end of pavement of 5 mm.

Set portamec., For universal mounting, gray iron, 7011, Polyamide, PA

GES6-2 with UT3 45. Service outlet with all necessary system accessories for direct installation in screed floors in interior areas.The scope of delivery contains a service outlet of nominal size 6 with universal fastening bracket and three universal supports, each for three Modul 45® devices. Service outlet with carpet protection frame, hinged lid and cord outlet made of polyamide in the colour RAL 7011. 10 mm floor covering recess in the hinged lid (changeable to 3, 5 or 8 mm).

UNIT P/MECAN GES R2 7011

Service outlet with hinged cover and cord outlet, GES R2. Service outlet with hinged cover and cord outlet for GES R2 floor socket for direct installation in the MT R2 installation socket.For use in dry-cleaned floors for indoor use.

UNIT P/MECAN T. ABAT GES R2 Or

GES R2 Ni floor socket, with flip-top lid Die-cast with zinc, Zn, nickel-plated

Flip-top with sliding slide, nickel. Mechanism holder set with hinged lid and sliding sliding for GES R2 floor socket for direct mounting in the MT R2 installation box in indoor areas. When closed, the entire unit can be cleaned with water.

UNIT P/MECAN GES R2 9011

Service outlet with hinged cover and cord outlet, GES R2. Service outlet with hinged cover and cord outlet for GES R2 floor socket for direct installation in the MT R2 installation socket.For use in dry-cleaned floors for indoor use.

BUCKET GESR2 P/2X1MOD45 MT R2 1-1

Installation socket, 1+1 empty. Installation socket for GES R2 floor socket for mounting in UD GES R2 screed box and in raised floor plates with an installation opening diameter of 122 mm.

STAINLESS STEEL FINISH PLATE

FINITION STAINLESS STEEL PLATE

Stainless steel finishing plate - for 50 mm reduced height floor box

PLAST FLOOR BOX COVER 16/24M

COVER BOX FLOOR PLAST 16/24M

Plastic lid and trim for standard version floor boxes 16/24 modules Cat.Nos 088022 / 088025 / 088041

STAINLESS STEEL FLOOR BOX COVER 12/18M

COVER BOX GROUND STAINLESS STEEL 12/18M

Metal lid and trim for standard floor boxes 12/18 modules Cat.Nos 088021 / 088024 / 088040 -with stainless steel coating

SOP REGISTER BOX 8/12M

SOP CASH REGISTER 8/12M

Kit for access covers - for lid and trim 8/12 modules Cat.Nos 088000 / 088003 / 088006

SOP REGISTER BOX 16/24M

SOP BOX LOG 16/24M

Kit for access covers - for lid and trim 16/24 modules Cat.Nos 088002 / 088005 / 088008

IP66 FLOOR BOX LID/BIS IN

BOX GROUND IP66 LID/BIS IN

Legrand IP66 Floor Box with Hinged Lid 170mm

SM STAINLESS STEEL FLOOR BOX COVER 8/12M

COVER BOX FLOOR SM INOX 8/12M

Metal lid for flush version floor boxes 8/12 modules Cat.Nos 088120 / 088123 / 088139 - with stainless steel coating

SM STAINLESS STEEL FLOOR BOX COVER 16/24M

COVER BOX FLOOR SM INOX 16/24M

Metal lid for flush version floor boxes 16/24 modules Cat.Nos 088122 / 088125 / 088141 - with stainless steel coating

SOP REGISTER BOX SM 12/18M

SOP CASH REGISTER SM 12/18M

Kit for access covers - for lid and trim 12/18 modules Cat.Nos 088104 / 088107

3M PORTAMEC FLOOR BOX

BOX FLOOR 3M PORTAMEC

Floor service outlet box - 3 modules

24M IP66 LARGE LOAD BOX

BOX GREAT BURDEN 24M IP66

Plate for metal in-screed floor box - IP66 - with central cable exit

FLOOR BOX IP44 8-24MM W/CABLE

BOX FLOOR IP44 8-24MM S/CABLE

Edge trim for tile 8 to 24 mm thickness - IP44 - with central cable exit

Set portamec., For universal mounting, gray iron, 7011, aluminum die casting, AlG

GRAF9-2 service outlet with UT4 45. GRAF9 service outlet for wet-care floors with all necessary system accessories for direct installation in raised floors for indoor use.The scope of delivery contains:- GRAF9 service outlet with universal fastening bracket, - Three UT4/45 universal supports, each for four Modul 45® devices.Hinged lid with concentric rings. Surface: bare metal with a finely scored structure, recesses painted in the colour RAL 9011, graphite black.Floor covering protection frame and hinged lid made of die-cast aluminium, tube body made of polyamide.The minimum installation depth is 75 mm (when using two UT4/45 universal supports) or 110 mm (when using the middle universal support).

UNIT P/MECAN BLIND GES R2B 7011

Service outlet with blanking cover and opening contour, GES R2. Service outlet with blanking cover and opening contour for GES R2 floor socket for direct installation in the MT R2 installation socket.For use in dry-cleaned floors for indoor use.

SET P/MECAN UNI GES9-3SU7011

GES9-3S service outlet with locking slider. Service outlet with locking slider for up to 12 individual Modul 45 devices in 3 UT4 universal supports, use in trunking systems and system floors for indoor use.Floor covering recess in the hinged cover pre-adjusted to 5 mm, if necessary adjustable to 10 mm.Service outlet with locking slider, 3-compartment, for the installation of MT9 mounting support. Three type APMT5 cover plates can be installed.Floor covering recess in the hinged cover pre-adjusted to 5 mm, if necessary adjustable to 10 mm.

UNIT P/MECAN ALLEN GES R2B Or

Service outlet with blanking cover and Allen slot, GES R2, nickel. Service outlet with blanking cover and Allen slot for GES R2 floor socket for direct installation in the MT R2 installation socket in indoor areas.The cover version can be used as a cable outlet.When closed, the floor socket can be wet-cleaned.

UNIT P/MECAN ALLEN GES R2B Cu

GES R2B Cu blind cover, blind with recess for Allen Die casting with zinc, Zn, copper-plated

GES R2 hexagon keyed blind mechanism set, old copper. Mechanism holder set with blind cover with hexagon key for GES R2 floor socket for direct mounting in the MT R2 installation box in indoor areas. The lid can be used as a cable outlet. When closed, the entire unit can be cleaned with water.

GES R2T Cr floor socket, with telescopic tube Die-cast with zinc, Zn, chrome plated

Tube with handle, GES R2, chrome. Mechanism holder set with tube and handle for GES R2 floor socket for direct mounting in the MT R2 installation box in indoor areas. The tube also meets the requirements of EN 50085-2-2 for floors that require cleaning with water while open even during the use of the floor socket.

UNIT P/MECAN T. ABAT GES R2T Or

Service outlet with tube body with handle clamp, GES R2, nickel. Service outlet with tube body and handle clamp for GES R2 floor socket for direct installation in the MT R2 installation socket for indoor use.The tube body fulfils the requirements of EN 50085-2-2 for wet-cleaned floors, also when in use.

MOUNTING BRACKET P/GES R2 P/1.5 X MODUL45, MT R2 1.5

Mounting bracket for GES R2 for 1.5 x Modul45 graphite black 9011 Polyamide, PA

Installation socket, 1.5 empty. Installation socket for GES R2 floor socket for mounting in UD GES R2 screed socket and in raised floor plates with an installation opening diameter of 122 mm.

BOX GREAT BURDEN 24M IP30

Plate for metal in-screed floor box - IP30 - with 2 lateral cable exits

Service outlet, complete with double socket, 125x125x110, Brushed and laminated, Stainless steel, grade 305, VA, 1.4303

Service outlet for duct mounting, Graphite black, 9011, Polyamide, PA

Service outlet, round, for screed height 55 mm. GESR9 service outlet with a fixed construction height of 55 mm for indoor use. With two fitted plug housings for vertical mounting of Modul 45 devices and four strain reliefs. Two installation frames are required to mount Modul 45 devices.The data modules are mounted using an optional mounting plate MPMT45. The service outlet is equipped with universal fastening brackets.

Service outlet with prot. frame, old copper, Copper-plated, Die-cast zinc, Zn

Kit completo, para empotrar, niquelado, Fundición a presión con zinc, Zn

Service outlet with prot. frame, Ni-plated, Nickel-plated, Die-cast zinc, Zn

Service outlet, complete with protective contact socket, Brass, CuZn

UDHOME2 floor socket, with stainless steel lid, freely equippable