BSS fire protection systems - OBO BETTERMANN

Cable fire protection cushion small, 350x120x10, Grey, Glass mesh with special fire protection filling

KBK-1 fire insulation pad, small 350x120x10mm Glass fabric with fire protection filling,

PYROBAG® intumescent pads. Intumescent cable pad made of narrow, dense and mechanically solid mesh glass fabric, with a special filling. Without mineral fibers, weather resistant and water resistant. Indoor use. Unlimited storage in dry rooms and protected against frost.

Cable fire protection cushion large, 350x170x40, Grey, Glass mesh with special fire protection filling

KBK-3 fire insulation pad, large 350x170x40mm Glass fabric with fire protection filling,

PYROBAG® fire protection cushion. Cable fire protection cushions made of dense, closely knit and mechanically solid glass mesh with a special filling. Free from mineral fibres, weatherproof and water-resistant. For interior application.Can be stored for an unlimited period of time in dry, frost-free rooms.

BLOCK FOAM FBA-B200-14

FBA-B200-14 foam block, Intumescent 200x144x60mm Permanently elastic spongy material, closed porosity,

PYROPLUG® Block foam block. Permanently elastic soft foam block for cable and combination insulation. Possibility of longitudinal and transverse mounting to achieve different fire resistance classes. Can be combined with the 2-component PYROSIT® NG firefighting foam. Usable on solid ceilings and walls and on lightweight partition walls, and approved for many installations. Indoor use. CE marked construction product, with European approval according to ETA-15/0803 for applications with a fuge-resistant duration of up to 120 minutes. More detailed information about the applications can be found in the authorization documents. Protect the surface of the insulation against water with spongy materials to ensure proper expansion of the foam in the event of a fire. Conventional silicone coating

Wall bracket and profile maintenance function, B295mm, galvanized band, DIN EN 10147, Steel, St

Bracket TPSA. Bracket for mounting on TPS suspended supports or as wall bracket for standard cable tray routing type for function maintenance to DIN 4102 Part 12.

Attaching component, oblique for function maintenance, Strip-galvanised, DIN EN 10147, Steel, St

ABS FS bend joint, for maintenance of function Steel, St, strip galvanized, DIN EN 10346

Pipe sleeve for combustible pipes, 50x26, Grey, Intumescent material

Pipe sleeve with 2 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors or M6 threaded rods.

Pipe sleeve for combustible pipes, 68x26, Grey, Intumescent material

Pipe sleeve with 2 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors or M6 threaded rods.

Pipe sleeve for combustible pipes, 106x26, Grey, Intumescent material

Pipe sleeve with 4 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors of M6 threaded rods up to size 75 mm, then M8.

Pipe sleeve for combustible pipes, 155x26,6, Grey, Intumescent material

Pipe sleeve with 4 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors of M6 threaded rods up to size 75 mm, then M8.

Pipe sleeve for combustible pipes, 200x40, Grey, Intumescent material

Pipe sleeve with 6 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors or M8 threaded rods.

Pipe sleeve for combustible pipes, 264x40, Grey, Intumescent material

Pipe sleeve with 8 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors or M8 threaded rods.

Calcium silicate plate for fire protect. applications, 500x150x20, Grey-white, Calcium silicate

Calcium silicate plate. Calcium silicate plate, as support plate, for the construction of frames in the penetration and to double thin wall thicknesses.Materials class EN 13501 - A1 non-combustible.

Insulation layer creator in a cartridge, 300ml, Intumescent material

Insulation layer creator in a cartridge. Dispersion-based fire protection compound for interior areas, to fill residual joints and close openings. Approved material for the closing of core drill holes when feeding through single cables and for closing the annular gap when exiting cables from the PYROLINE® Con PLC fire protection duct. Material class DIN 4102 - B2, normally flammable. In dry, frost-free rooms, the compound can be stored at temperatures from +5 °C to +25 °C for up to 18 months in closed, upright original containers.

Ablation coating in a cartridge, 300ml, Intumescent material

ASX-K intumescent paint, in 300ml cartridge Construction material,

Ablation coating PYROCOAT® in a cartridge. Combined, endothermic and weatherproof coating for internal and external areas, to fill residual joints. Universal protection coating for cable and cable support structures. Use as direct filler, and as paint when stirred.Material class DIN 4102 - B2, normally flammable.In dry, frost-free rooms, the coating can be stored at temperatures from +5 °C to +25 °C for up to 18 months in closed, upright original containers.

Fire protection filler in a cartridge, 310ml, Brown, Intumescent material

PYROPLUG® screed filler. Fire protection filler in a cartridgeUsable as small insulation and as joint closing compound in all insulation of the PYROPLUG® series.In dry, frost-free rooms, the fire protection filler can be stored for up to 12 months at a temperature of +5 °C to +30 °C.

Woven strip self-adhesive, transparent, 25000x50mm, Polyethylene, PE

Adhesive tape. Fibre-reinforced, transparent adhesive tape as lining aid for applications with PYROSIT® NG fire protection foam and for universal fix. One roll contains 25 m².

Calcium silicate plate for fire protect. applications, 1000x250x30, Grey-white, Calcium silicate

Calcium silicate plate. Calcium silicate plate, as support plate, for the construction of frames in the penetration and to double thin wall thicknesses.Materials class EN 13501 - A1 non-combustible.

Sprung chuck , Steel, St

Pliers for metal strip clips. High-quality spring chuck with cutting tool for metal strip clips, type MBS.

Tightening strap lock , Steel, St

Tightening strap lock. Tightening strap lock with buckle, for simple fixing of the tightening straps FSB-SB.

Fire protection bandage for wet and external areas, 1100x20000,

Fire protection box complete set,

Fire protection case. The PYROSIT® NG fire protection case contains all the required products to create foam insulations. The complete set contains 3 foam cartridges, 1 professional cartridge pistol, 6 mixing and 5 extension pipes. For interior application.

Pipe shell internally coated, Ø107x300, Grey, Polyvinylchloride, PVC

PYROCOMB® Intube pipe shell. Internally coated pipe shells with click lock. The inner space can be fitted with cables and electrical installation pipes completely. For interior application. CE-labelled, European approved construction product according to ETA-13/0904 and German general type approval. Fire resistance up to 120 minutes.Closing with 2 foam plugs included in the delivery. The surface seal is created with PYROCOAT® ASX coating.In some applications, the use of metallic tightening straps is prescribed to secure the pipe shells in light-duty partitions. Details can be found in the mounting instructions/approval.

Cable gland with locknut, M20, Pastel orange, 2003, Polyamide, fibreglass reinforced, PA/GF

Cable gland with locknut as a set. Robust cap nut cable gland with metric connecting thread to IEC 423, including pre-mounted locknut.For high tightness requirements. Strain relief, torsion protection and tightness over the whole clamping area. Sealing ring made of polychloroprene/acrylonitrile butadiene rubber. Moulded shaped sealing lip on intermediate support, no connection thread sealing ring required.VDE-tested according to DIN EN 50262, protection rating IP68 at 5 bar for 1 hr.For maintenance of electrical function according to DIN 4102 Part 12 in connection with the closed junction boxes of the FireBox T series.Colour: Pastel orange.

Cable gland with locknut, M32, Pastel orange, 2003, Polyamide, fibreglass reinforced, PA/GF

V-TEC VM32+ OR cable gland, with M32 Polyamide lock nut, PA,

Cable glands with lock nuts. Robust gland type with cap nut with metric connection thread according to IEC 423, with pre-assembled lock nut included. For situations where high tightness is required. Tensile relief, torsion protection and tightness along the entire tightening area. Polychloroprene/acrylonitrile-butadiene rubber gasket. Sealing lip in the intermediate fittings, no additional gasket is required for the connection thread. With VDE approval according to DIN EN 50262, IP 68 protection degree with 5 bar 1 h. For electrical function maintenance according to DIN 4102 part 12 in combination with the FireBox T series junction boxes. Color: pale orange.

Fire protection mortar for combination insulation, 10kg, Special mortar

PYROMIX® dry mortar in bucket. Mortar to create cable and combination insulation in solid walls and ceilings. Suitable for pumping, pressing and for manual installation. Adding approx. 3 litres of water to 10 kg of dry mortar produces about 10 litres of workable compound. For interior application.In dry, frost-free rooms, the dry mortar can be stored for at least 12 months in closed original containers.

STOPPER INTUMESCENT FBA-SN65

PYROPLUG® Peg plugs. Plug for cable insulation.Protect the FBA plugs against water in order to guarantee safe foaming in case of fire.

STOPPER INTUMESCENT FBA-SN165

FBA-SN165 Plug, Intumescent Ø165x70mm Permanently elastic spongy material, closed porosity,

PYROPLUG® Peg caps. Cable Insulation PlugsProtect FBA plugs from water to ensure proper foam expansion in the event of a fire.

BLOCK SEALING FBA-BV200-14

PYROPLUG® Block vacuum block. Vacuum-packed version of the FBA-B200-14 foam block for the simple closure of the residual gap in the PYROPLUG® Block combination insulation. After mounting has been completed, the film is cut and the block expands to its original size again. The film can remain in the insulation. For interior application.

STOPPER INTUMESCENT FBA-SN122

FBA-SN122 Intumescent Cap Ø122x70mm brown Permanently elastic spongy material, with closed porosity

STOPPER INTUMESCENT FBA-SN134

PYROPLUG® Peg plugs. Plug for cable insulation.Protect the FBA plugs against water in order to guarantee safe foaming in case of fire.

BORNE CERAMIC TK10 FIREBOX T

Ceramic terminal, single. High-temperature-resistant ceramic terminal for refitting of the FireBox T series. Tested according to DIN EN 60998-2-1:2004.

TORN. FLAT-MMS-PLUS 6X50 FIRE

MMS-plus P 6x50 round head tie, with pan head. Bolt tie for direct mounting without additional anchors in cracked and uncracked concrete and masonry. With round head for universal fastenings. Torx drive T30.Construction product tested according to EAD and CE mark, with European Technical Assessment (ETA) and proof of suitability. Load-bearing capacities under fire loads proven up to fire resistance class R120.

TORN. FLAT-MMS-PLUS ST 6X55 FUEG

MMS-plus ST 6x55 push-in tie, with connection thread. Bolt tie for direct mounting without additional anchors in cracked and uncracked concrete and masonry. M6 connection thread for fastening clips with threaded foot.Construction product tested according to EAD and CE mark, with European Technical Assessment (ETA) and proof of suitability. Load-bearing capacities under fire loads proven up to fire resistance class R120.

UNION TRAY GRID ABG FT

Connection component. Seat for threaded rod on mesh cable tray.

COVER TUBES FBA-DR100

Tube cover Ø78x100mm brown Permanently elastic spongy material, with closed porosity

Empty mini pipe shell. Empty pipe shell for use in FBA-SP small insulation in lightweight partitions. For interior application. Protect the pipe shell against water in order to guarantee safe foaming in case of fire.

FRAME HARNESS FBA-F

PYROPLUG® Box box insulation. Box for cable insulation.Consisting of a two-part, hard frame and two soft internal pieces. Protect the frame and internal pieces against water in order to guarantee safe foaming in case of fire. For interior application.

HALF-COVERED COATED ON THE INSIDE, CTS-HP200

PYROCOMB® Intube half shell. Internally coated half shell, the inner space of which can be fully assigned with cables and electrical installation pipes. For interior application. CE-labelled, European approved construction product according to ETA-13/0904 and German general type approval. Fire resistance up to 120 minutes.Closing with foam plug included in the delivery. The surface seal is created with PYROCOAT® ASX coating. The system is particularly suitable for underfloor areas.Details can be found in the mounting instructions/approval.

UNLOADER TRACTION ZSE90-25-11

Strain relief on three sides, with mineral wool, internal height 115 mm. Strain relief as an effective support measure for vertical cable routing, according to DIN 4102 Part 12, approved for all cable types and all vertical routing systems. Maintenance of electrical function classes E30 to E90. Housing including mineral fibre panels, fastening material, ASX fire protection coating in cartridge and identification plate.

MANT. FUNCTION TRAY ESC. DISTANCE BETWEEN RUNGS 150MM, LG 620 VSF FT

LG 60 cable ladder, 6 m VSF. Cable ladder for the horizontal routing of cables. Can be used as a standard support structure for the maintenance of electrical functionality according to DIN 4102 Part 12. Maintenance of electrical function classes E30 to E90. With riveted C profile rung, open in an upward direction.

COVER TUBES FBA-D150

PYROPLUG® Shell drill crown insulation. Pipe shell for cable insulation consisting of a one-part, hard pipe sleeve and two soft plugs with a 500 mm diameter. Protect the pipe sleeves and plugs against water in order to guarantee safe foaming in case of fire. Application in interior areas.

CONE FOR CABLE EDK 25 OR

EDK 25 OR cable cone for Firebox M25 orange Thermoplastic elastomer, TPE

Plug-in seal for FireBox T series. The soft plug-in seal can be cut back step by step to suit the relevant cable diameter.Colour: Pastel orange.

UNLOADER TRACTION ZSE90-35-11

Strain relief on three sides, with mineral wool, internal height 115 mm. Strain relief as an effective support measure for vertical cable routing, according to DIN 4102 Part 12, approved for all cable types and all vertical routing systems. Maintenance of electrical function classes E30 to E90. Housing including mineral fibre panels, fastening material, ASX fire protection coating in cartridge and identification plate.

External joining of ladder tray135x65x30, hot-dip galvanized steel, DIN EN ISO 1461

External connector. External connector for mechanical connection of cable ladder sections for routing types with cable ladders for the maintenance of electrical function to DIN 4102 Part 12. Including bolts.

Foam protection kit w/fire cartridge gun included 415x210x85 white

PYROSIT® NG Starter Set. The PYROSIT® NG Starter Set contains all the required products to create foam insulations. The complete set consists of a PYROSIT® NG cartridge, two mixing tubes and a cartridge pistol. Suitable for 5:1 coaxial cartridges. For interior application.Free the moving parts, push rods and pressure plate from any foam residues and maintain them with a regreasing cleaning agent.

Ceramic terminal for FireBox T 10 mm²

Ceramic terminal, double. High-temperature-resistant ceramic terminal with four connection options for refitting of the FireBox T series. Tested according to DIN EN 60998-2-1:2004.

T100ED 06A junction box, for function maintenance 150x116x67 Polypropylene, PP

Bypass box for function maintenance T100ED 06A

FireBox T100 with plug-in seals, single terminals. Connection box with soft plug-in seals. Sufficiently large wiring compartment through diagonally arranged connection unit with completely pre-mounted, high-temperature-resistant ceramic terminals. Green-yellow labelled protective conductor terminal. Fastening on easily accessible external flaps. Approved for cable systems that maintain the electrical function according to DIN 4102 Part 12 with the classes E30, E60 and E90. Ceramic clamps have been tested according to DIN EN 60998-2-1:2004.Including 2 x MMSplus P 6x35 screw ties.

T100ED 06AF junction box, for function maintenance 150x116x67 Polypropylene, PP

T100ED 06AF Function Maintenance Bypass Box

FireBox T100ED with external fastening and fuse holder. Junction box with one fuse holder and soft plug-in seals. Sufficiently large wiring compartment through diagonally arranged connection unit with completely pre-mounted, high-temperature-resistant ceramic terminals. Green-yellow labelled protective conductor terminal. Fastening on easily accessible external flaps. Approved for cable systems that maintain the electrical function according to DIN 4102 Part 12 with the classes E30, E60 and E90. Ceramic clamps have been tested according to DIN EN 60998-2-1:2004.Including 2 x MMSplus P 6x35 screw ties.

T250ED 16AF junction box, for function maintenance 240x190x95 Polypropylene, PP

T250ED 16AF Function Maintenance Bypass Box

FireBox T250 with plug-in seals, 1 fuse holder. Junction box with one fuse holder and soft plug-in seals. Sufficiently large wiring compartment through diagonally arranged connection unit with completely pre-mounted, high-temperature-resistant ceramic terminals. Green-yellow labelled protective conductor terminal. Fastening on easily accessible external flaps. Approved for cable systems that maintain the electrical function according to DIN 4102 Part 12 with the classes E30, E60 and E90. Ceramic clamps have been tested according to DIN EN 60998-2-1:2004.Including 2 x MMSplus P 6x35 screw ties.

T100ED 4x4AD junction box, for function maintenance 150x116x67 Polypropylene, PP

T100ED 4x4AD Function Maintenance Bypass Box

FireBox T100, with plug-in seals, for data technology. Connection box for data technology with soft plug-in seals. Pairs of high-temperature-resistant ceramic terminals, suitable for data cables. Green-yellow labelled protective conductor/shield terminal. Fastening on easily accessible external flaps. Approved for cable systems that maintain the electrical function according to DIN 4102 Part 12 with the classes E30, E60 and E90. Ceramic clamps have been tested according to DIN EN 60998-2-1:2004.Including 2x MMSplus P 6x35 screw ties.

T350ED 4x32AD junction box, for function maintenance 285x201x120 Polypropylene, PP

T350ED 4x32AD Function Maintenance Bypass Box

FireBox T350, with plug-in seals, for data technology, 4x32. Connection box for data technology with soft plug-in seals. Pairs of high-temperature-resistant ceramic terminals, suitable for data cables. Green-yellow labelled protective conductor/shield terminal. Fastening on easily accessible external flaps. Approved for cable systems that maintain the electrical function according to DIN 4102 Part 12 with the classes E30, E60 and E90. Ceramic clamps have been tested according to DIN EN 60998-2-1:2004.Including 2x MMSplus P 6x35 screw ties.