Integrated Automation

355818

HMC-SD291

HMCSD291

SD Memory card 2 GB

SD Memory Card 2 GB

NX029097E

NX-ID5342

NXID5342.1

16 Digital Inputs, Standard speed, NPN 24 VDC, screwless push-in connector, 12 mm wide

16 Digital Inputs, Standard speed, NPN 24 VDC, screwless push-in connector, 12 mm wide

NX010139M

NX102-1100

NX1021100

NX102 Machine controller, modular, 5 MB of program and 33.5 MB of data memory, EtherCAT built-in (4 servoejes, 4 axes PTP, 64 nodes EtherCAT in total), 2 Ethernet ports (OPC-UA, EtherNet/IP)

Sysmac NX1 Modular CPU, 5MB program and 33.5MB data memory , built-in EtherCAT (4 servo axes, 4 PTP axes, total 64 EtherCAT nodes), 2 Ethernet ports (

Sysmac NX1 Modular CPU, 5MB program and 33.5MB data memory , built-in EtherCAT (4 servo axes, 4 PTP axes, total 64 EtherCAT nodes), 2 Ethernet ports (OPC-UA and EtherNet/IP)

NX010039D

NX701-1700

NX7011700

NX7 Machine Controller 256 Axes

Sysmac NX7 CPU, 80MB memory, built-in EtherCAT (256 servo axes, in total 512 EtherCAT nodes) and 2 EtherNet/IP ports

Sysmac NX7 CPU, 80MB memory, built-in EtherCAT (256 servo axes, in total 512 EtherCAT nodes) and 2 EtherNet/IP ports

NX020111E

NX-OD5256-1

NXOD52561

Unit NX - 16 digital outputs, speed standard, PNP 24 Vdc, 0.5 A/point, 5 A/unit, NX, connector, screw, 30 mm wide

16 Digital Outputs, Standard speed, PNP 24 VDC, 0.5 A/point, 5 A/NX Unit, screw connector, 30 mm wide

16 Digital Outputs, Standard speed, PNP 24 VDC, 0.5 A/point, 5 A/NX Unit, screw connector, 30 mm wide

NXS36009A

NX-SIH400

NXSIH40011

4 Digital Safety Inputs, PNP 24 VDC, high connectivity unit, screwless push-in connector, 12 mm wide

4 Digital Safety Inputs, PNP 24 VDC, high connectivity unit, screwless push-in connector, 12 mm wide

NX020173E

NX-EC0142

NXEC0142,1

NX Unit - 1 Input Encoder Line Driver PNP Incremental

1 x Incremental Encoder Line driver Input, phases A and B: single-phase 4 MHz (phase difference pulse Input x4: 1 MHz), Phase Z: 1 MHz, PNP, screwless push-in connectors, 24 mm wide

NXS32007C

NX-SL3300

NXSL3300VER11

Safety controller, 32 safety master connections, up to 256 safety I/O

Safety controller, 32 safety master connections, up to 256 safety I/O

NX010002E

NJ501-1300

NJ5011300

NJ501 Machine Controller 16 Axes

Sysmac NJ5 CPU, 20 mB memory, built-in EtherCAT (16 servo axes, in total 192 EtherCAT nodes) and EtherNet/IP

Sysmac NJ5 CPU, 20 mB memory, built-in EtherCAT (16 servo axes, in total 192 EtherCAT nodes) and EtherNet/IP

NXTC1003R

NX-TC2408

NXTC2408

2 loops, input Pt100/thermocouple, 2 analog outputs, 4 - 20 mA, resolution 1:10000, control of heat or cold, terminals, Push-in Plus

2 loops, Thermocouple/Pt100 input, 2 Analog Outputs, 4 - 20 mA, resolution 1:10000, Heat or Cool control, Push-in Plus terminals

2 loops, Thermocouple/Pt100 input, 2 Analog Outputs, 4 - 20 mA, resolution 1:10000, Heat or Cool control, Push-in Plus terminals

NXS36006G

NX-SOH200

NXSOH200.1

2 Digital Safety Outputs, PNP 24 VDC, 2.0 A/point, 4.0 A/NX Unit, screwless push-in connector, 12 mm wide

2 Digital Safety Outputs, PNP 24 VDC, 2.0 A/point, 4.0 A/NX Unit, screwless push-in connector, 12 mm wide

CK3M0005R

CK3M-CPU111

CK3MCPU111

CK3M CPU, 1 GB RAM, 1 GB Flash, 4 EtherCAT axes. Up to two axis interface units can be connected. Expansion units can be connected

CK3M CPU, 1 GB RAM, 1 GB Flash, 4 EtherCAT axes. Up to two shaft interface units can be connected. Expansion units can be connected.

CK3M CPU, 1 GB RAM, 1 GB Flash, 4 EtherCAT axes. Up to two axis interface units can be connected. Expansion units can be connected.

NX020119M

NX-PG0232-5

NXPG02325

Unit NX - 2 pulse outputs NPN, Line-driver Connector MIL

2 x Line Driver Pulse Output, NPN, 4 Mpps, 1 x MIL connector, 12 mm wide

2 x Line Driver Pulse Output, NPN, 4 Mpps, 1 x MIL connector, 12 mm wide

NX020190E

NX-OD6121-5

NXOD61215.1

32 Digital Outputs, Standard speed, NPN 24 VDC, 0.5 A/point, 4 A/NX Unit, MIL40 connector (not included), 30 mm wide

32 Digital Outputs, Standard speed, NPN 24 VDC, 0.5 A/point, 4 A/NX Unit, MIL40 connector (not included), 30 mm wide

NX020041M

NX-AD4208

NXAD4208

Unit NX - 8 Inputs of an analogue 4-20mA Differential 1/30000 10µs

8 Analog Inputs, 4 to 20 mA differential, resolution 1:30000, 10 µs/ch, screwless push-in connector, 12 mm wide

8 Analog Inputs, 4 to 20 mA differential, resolution 1:30000, 10 µs/ch, screwless push-in connector, 12 mm wide

NX020118B

NX-PG0342-5

NXPG03425

Unit NX - 4 pulse outputs PNP, Line-driver Connector MIL

4 x Line Driver Pulse Output, PNP, 4 Mpps, 2 x MIL connectors, 24 mm wide

4 x Line Driver Pulse Output, PNP, 4 Mpps, 2 x MIL connectors, 24 mm wide

NX010140D

NX102-1200

NX1021200

NX102 Machine controller, modular, 5 MB of program and 33.5 MB of data memory, EtherCAT built-in (8 servoejes, 4 axes PTP, 64 nodes EtherCAT in total), 2 Ethernet ports (OPC-UA, EtherNet/IP)

Sysmac NX1 Modular CPU, 5MB program and 33.5MB data memory , built-in EtherCAT (8 servo axes, 4 PTP axes, total 64 EtherCAT nodes), 2 Ethernet ports (

Sysmac NX1 Modular CPU, 5MB program and 33.5MB data memory , built-in EtherCAT (8 servo axes, 4 PTP axes, total 64 EtherCAT nodes), 2 Ethernet ports (OPC-UA and EtherNet/IP)

NX020101H

NX-EC0112

NXEC0112

Unit NX - 1 Input of Encoder NPN Incremental

1 x Incremental Encoder NPN Input, Phases A and B: Single-phase 500 kHz (phase difference pulse Input x4: 125 kHz), Phase Z: 125 kHz, screwless push-i

1 x Incremental Encoder NPN Input, Phases A and B: Single-phase 500 kHz (phase difference pulse Input x4: 125 kHz), Phase Z: 125 kHz, screwless push-in connector, 12 mm wide

NX029109B

NX-PF0630

NXPF0630.1

NX I/O power feed unit, 5-24 V DC input, 8 terminals, 4A, screwless push-in connector, 12mm wide

NX I/O power feed unit, 5-24 V DC input, 8 terminals, 4A, screwless push-in connector, 12mm wide

CK3W0022H

CK3W-MD7120

CK3WMD7120

CK3W Digital IO, IN/OUT:16/16, PNP

CK3W Digital IO, IN/OUT:16/16, PNP

NX010063G

NX1P2-9024DT

NX1P29024DT

NX1P Machine Controller, 14/10 I/O Transistor (NPN), 4-axis PTP

Sysmac NX1P CPU with 24 Digital Transistor I/O (NPN), 1.5 MB memory, EtherCAT (0 servo axes, 4 PTP axes, 16 EtherCAT nodes), EtherNet/IP and 1 serial

Sysmac NX1P CPU with 24 Digital Transistor I/O (NPN), 1.5 MB memory, EtherCAT (0 servo axes, 4 PTP axes, 16 EtherCAT nodes), EtherNet/IP and 1 serial option port

NX010173M

NX701-Z600

NX701Z600

Sysmac NX7 AI Controller, 80MB memory, built-in EtherCAT (128 servo axes, in total 512 EtherCAT nodes) and 2 EtherNet/IP ports

Sysmac NX7 AI Controller, 80MB memory, built-in EtherCAT (128 servo axes, in total 512 EtherCAT nodes) and 2 EtherNet/IP ports

NX029088F

NX-AD3204

NXAD3204.1

4 Analog Inputs, 4 to 20 mA differential, resolution 1:8000, 250 µs/ch, screwless push-in connector, 12 mm wide

4 Analog Inputs, 4 to 20 mA differential, resolution 1:8000, 250 µs/ch, screwless push-in connector, 12 mm wide

CK3M0006G

CK3M-CPU121

CK3MCPU121

CK3M CPU, 1 GB RAM, 1 GB Flash, 8 EtherCAT axes. Up to two axis interface units can be connected. Expansion units can be connected

CK3M CPU, 1 GB RAM, 1 GB removable memory, 8 EtherCAT axes, up to 2 axis interface units can be connected, expansion units can also be connected.

CK3M CPU, 1 GB RAM, 1 GB Flash, 8 EtherCAT axes. Up to two axis interface units can be connected. Expansion units can be connected.

CK3W0024D

CK3W-AD2100

CK3WAD2100

CK3W Analog IN, 4 points, +/-10 V, 16 bit (full scale)

CK3W Analog IN, 4 points, +/-10 V, 16 bit (full scale)

CK3W0023F

CK3W-AD3100

CK3WAD3100

CK3W Analog IN, 8 points, +/-10 V, 16 bit (full scale)

CK3W Analog IN, 8 points, +/-10 V, 16 bit (full scale)

CK3W0020A

CK3W-AX2323P

CK3WAX2323P

CK3W 4 Axis Interface Unit, Sine encoder, DirectPWM, PNP

CK3W 4 Axis Interface Unit, Sinusoidal encoder, DirectPWM, PNP

NX029089D

NX-AD4203

NXAD4203.1

8 Analog Inputs, 4 to 20 mA single ended, resolution 1:8000, 250 µs/ch, screwless push-in connector, 12 mm wide

8 Analog Inputs, 4 to 20 mA single ended, resolution 1:8000, 250 µs/ch, screwless push-in connector, 12 mm wide

NX020031C

NX-AD4604

NXAD4604

Unit NX - 8 Inputs of an analogue +/-10V Differential 1/8000 250µs

8 Analog Inputs, -10 to +10 V differential, resolution 1:8000, 250 µs/ch, screwless push-in connector, 12 mm wide

8 Analog Inputs, -10 to +10 V differential, resolution 1:8000, 250 µs/ch, screwless push-in connector, 12 mm wide

NX020079H

NX-AUX02

NXAUX02

Accessory, NX - Pin coding (for 10 units NX)

Terminal block coding pins for 10x NX I/O units (terminal block: 30 pins, unit: 30 pins)