Small distribution board

8GB5012-1KM

8GB5012-1KM

-

SIMBOX XL flush-mounting, 1-tier 1x 12 MW (14 MW) Safety class 2

Simbox XL, Recessed, 1 row, 12 modules, with door. Cancelations and returns limited. Consult conditions.

8GB1371-3

8GB1371-3

-

SIMBOX Universal WP Wall-mounted distribution board FM, IP65 1-tier, 18 MW, without Terminal strip

SIMBOX UNIVERSAL WP 1 row 18 mod. IP 65 superf.. Cancelations and returns limited. Consult conditions.

8GB1371-0

8GB1371-0

-

SIMBOX Universal WP Wall-mounted distribution board FM, IP65 1-tier, 4 MW, without terminal strip

SIMBOX UNIVERSAL WP 1 row 4 mod. IP 65 superf.. Cancelations and returns limited. Consult conditions.

8GB1373-3

8GB1373-3

-

SIMBOX Universal WP Wall-mounted distribution board FM, IP65 3-tier, 54 MW, without Terminal strip

SIMBOX UNIVERSAL WP 3 rows 18 mod. IP 65 superf.. Cancelations and returns limited. Consult conditions.

8GB5048-1KM

8GB5048-1KM

-

SIMBOX XL flush-mounting, 4-tier - 4x 12 MW (14 MW) Safety class 2

Simbox XL, Recessed, 4 rows, 4 x 12 modules, with door. Cancelations and returns limited. Consult conditions.

8GB5012-4KM

8GB5012-4KM

-

SIMBOX XL hollow wall, 1-tier 1x 12 MW (14 MW) Safety class 2

Simbox XL, Recessed for plasterboard, 1 row, 12 modules, with door. Cancelations and returns limited. Consult conditions.

8GB1372-2

8GB1372-2

-

SIMBOX Universal WP Wall-mounted distribution board FM, IP65 2-tier, 24 MW, without Terminal strip

SIMBOX UNIVERSAL WP 2 rows 12 mod. IP 65 superf.. Cancelations and returns limited. Consult conditions.

8GB5048-4KM

8GB5048-4KM

-

SIMBOX XL hollow wall, 4-tier - 4x 12 MW (14 MW) Safety class 2

Simbox XL, Recessed for plasterboard, 4 rows, 4 x 12 modules, with door. Cancelations and returns limited. Consult conditions.

8GB1372-3

8GB1372-3

-

SIMBOX Universal WP Wall-mounted distribution board FM, IP65 2-tier, 36 MW, without Terminal strip

SIMBOX UNIVERSAL WP 2 rows 18 mod. IP 65 superf.. Cancelations and returns limited. Consult conditions.

8GB5024-1KM

8GB5024-1KM

-

SIMBOX XL flush-mounting, 2-tier 2x 12 MW (14 MW) Safety class 2

Simbox XL, Recessed, 2 rows, 2 x 12 modules, with door. Cancelations and returns limited. Consult conditions.

8GB1371-1

8GB1371-1

-

SIMBOX Universal WP Wall-mounted distribution board FM, IP65 1-tier, 8 MW, without terminal strip

SIMBOX UNIVERSAL WP 1 row 8 mod. IP 65 superf.. Cancelations and returns limited. Consult conditions.

8GB5036-4KM

8GB5036-4KM

-

SIMBOX XL hollow wall, 3-tier 3x 12 MW (14 MW) Safety class 2

Simbox XL, Recessed for plasterboard, 3 rows, 3 x 12 modules, with door. Cancelations and returns limited. Consult conditions.

116905

RA-C4-PB65

Y7-116905

Power box, 5x1.5-6qmm, IP65

RA-C4-PB65

Power box, 5x1.5-6qmm, IP65

2008852

SDB 12 PC

-

DISTRIBUTION BOX 12 DISP PC

Distribution box, 12 division units, with terminal strip, polycarbonate. Distribution box with terminal strip for surface mounting, for the current sub-distribution in interior and exterior areas, in accordance with IEC 439-3. With pre-mounted 35 mm hat profile rail. IP66 protection type and IK08 protection rating. Transparent cover to screw on, with cut-out.- Protection-insulated for a maximum of 12 division units- Terminal strip set consisting of: One each of: PE/N terminal (1x25 mm² and 1x16 mm² screw terminals, 2x4 mm² and 12x2.5 mm² screwless terminals), mini hat profile rail, mounting instructions and fastening set- Identification plates for connected consumers- 8 elastic cable entries Ø20 mm for cable diameters of 0–17 mm- 1 elastic cable entry Ø25 mm for cable diameters of 0–22 m

2008872

SDB 12L PC

-

BOX, DISTR.WITHOUT REGLT.12 DISP PC

Small SDB 12L PC distribution board, without power strip, 12 devices 286x202x125 Polycarbonate, PC,

Distribution box, 12 division units, empty, polycarbonate. Small distributor for surface mounting, for the current sub-distribution in interior and exterior areas, according to IEC 439-3. With pre-mounted 35 mm hat profile rail. IP66 protection type and IK08 protection rating. Transparent cover to screw on, with cut-out. Including 4 screw cover caps.- Protection-insulated for a maximum of 12 division units- 11 break-out openings each of Ø 20 mm at the top and bottom- 1 combination break-out opening each of Ø 20/25/32 mm at the top and bottom- 4 screw cover capsNominal current 63 APower loss at 40 K 25.1 W

2008812

SDB 12 PS

-

DISTRIBUTION BOX 12 DISP PS

Distribution box, 12 division units, with terminal strip, polystyrene. Distribution box with terminal strip for surface mounting, for the current sub-distribution in interior and protected exterior areas, in accordance with IEC 439-3. With pre-mounted 35 mm hat profile rail. IP66 protection type and IK07 protection rating. Transparent cover to screw on, with cut-out.- Protection-insulated for a maximum of 12 division units- Terminal strip set consisting of: Three each of: PE/N terminals with 4x 16 mm² screw terminals, mini hat profile rail, mounting instructions and fastening set- Identification plates for connected consumers- 8 elastic cable entries Ø20 mm for cable diameters of 0–17 mm- 1 elastic cable entry Ø25 mm for cable diameters of 0–22 mm- 1 elastic cable entry Ø32 mm for cable

2008832

SDB 12L PS

-

BOX, DISTR.WITHOUT POWER STRIP,12 DISP

Distribution box, 12 division units, empty, polystyrene. Distribution box for surface mounting, for the current sub-distribution in interior and protected exterior areas, in accordance with IEC 439-3. With pre-mounted 35 mm hat profile rail. IP66 protection type and IK07 protection rating. Transparent cover to screw on, with cut-out.- Protection-insulated for a maximum of 12 division units- 11 Ø 20 mm break-out openings each at the top and bottom- 1 Ø 20/25/32 mm combination break-out opening each at the top and bottom- 4 screw cover capsNominal current 63 APower loss at 40 K 25.1 W

2008860

SDB 03L PC

-

BOX, DISTR.WITHOUT REGLT.3 DISP PC

Distribution box, 3 division units, empty, polycarbonate. Small distributor for surface mounting, for the current sub-distribution in interior and exterior areas, according to IEC 439-3. With pre-mounted 35 mm hat profile rail. IP66 protection type and IK08 protection rating. Transparent cover to screw on, with cut-out. Including 4 screw cover caps.- Protection-insulated for a maximum of 3 division units- 2 break-out openings each of Ø 20 mm at the top and bottom- 1 combination break-out opening each of Ø 20/25 mm at the top and bottom- 4 screw cover capsNominal current 40 APower loss at 40 K 17 WMeasured voltage Un: 400 VOperating measured voltage Ue: 400 VImpulse current resistance Cat.III Uimp: 4 kV

2008840

SDB 03 PC

-

DISTRIBUTION BOX 3 DISP PC

Distribution box, 3 division units, with terminal strip, polycarbonate. Distribution box with terminal strip for surface mounting, for the current sub-distribution in interior and exterior areas, in accordance with IEC 439-3. With pre-mounted 35 mm hat profile rail. IP66 protection type and IK08 protection rating. Transparent cover to screw on, with cut-out.- Protection-insulated for a maximum of 3 division units- Terminal strip set consisting of: One each of: PE/N terminal (1x25 mm² and 1x16 mm² screw terminals, 2x4 mm² and 12x2.5 mm² screwless terminals), mini hat profile rail, mounting instructions and fastening set- Identification plates for connected consumers- 2 elastic cable entries Ø20 mm for cable diameters of 0–17 mm- 1 elastic cable entry Ø25 mm for cable diameters of 0–22 mm-

2008844

SDB 05 PC

-

DISTRIBUTION BOX 5 DISP PC

Distribution box, 5 division units, with terminal strip, polycarbonate. Distribution box with terminal strip for surface mounting, for the current sub-distribution in interior and exterior areas, in accordance with IEC 439-3. With pre-mounted 35 mm hat profile rail. IP66 protection type and IK08 protection rating. Transparent cover to screw on, with cut-out.- Protection-insulated for a maximum of 5 division units- Terminal strip set consisting of: One each of: PE/N terminal (1x25 mm² and 1x16 mm² screw terminals, 2x4 mm² and 12x2.5 mm² screwless terminals), mini hat profile rail, mounting instructions and fastening set- Identification plates for connected consumers- 4 elastic cable entries Ø20 mm for cable diameters of 0–17 mm- 1 elastic cable entry Ø25 mm for cable diameters of 0–22 mm-

2008848

SDB 09 PC

-

DISTRIBUTION BOX 9 DISP PC

Distribution box, 9 division units, with terminal strip, polycarbonate. Distribution box with terminal strip for surface mounting, for the current sub-distribution in interior and exterior areas, in accordance with IEC 439-3. With pre-mounted 35 mm hat profile rail. IP66 protection type and IK08 protection rating. Transparent cover to screw on, with cut-out.- Protection-insulated for a maximum of 9 division units- Terminal strip set consisting of: One each of: PE/N terminal (1x25 mm² and 1x16 mm² screw terminals, 2x4 mm² and 12x2.5 mm² screwless terminals), mini hat profile rail, mounting instructions and fastening set- Identification plates for connected consumers- 6 elastic cable entries Ø20 mm for cable diameters of 0–17 mm- 1 elastic cable entry Ø25 mm for cable diameters of 0–22 mm-

2008864

SDB 05L PC

-

BOX, DISTR.WITHOUT REGLT.5 DISP PC

Distribution box, 5 division units, empty, polycarbonate. Distribution box with terminal strip for surface mounting, for the current sub-distribution in interior and exterior areas, in accordance with IEC 439-3. With pre-mounted 35 mm hat profile rail. IP66 protection type and IK08 protection rating. Transparent cover to screw on, with cut-out. Including 4 screw cover caps.- Protection-insulated for a maximum of 5 division units- 4 Ø 20 mm break-out openings each at the top and bottom- 1 Ø 20/25 mm combination break-out opening each at the top and bottom- 4 screw cover capsNominal current 40 APower loss at 40 K 19 W

2008868

SDB 09L PC

-

BOX, DISTR.WITHOUT REGLT.9 DISP PC

Small SDB 09L PC distribution board, without power strip, 9 devices 240x191x125 Polycarbonate, PC,

Small distributor 9 separations, vacuum, made of polycarbonate. Small distributor for flush mounting, for indoor and outdoor power sub-distribution, according to IEC 439-3. With pre-assembled 35 mm U-rail. IP66 protection class and IK08 protection degree Transparent cover for screwing, with section. Included 4 threaded plugs.- Protective insulation for a maximum of 9 dividing units- 8 rupture openings Ø 20 mm each at the top and bottom- 1 combined opening Ø 20/25/32 mm at the top and bottom- 4 screw capsThe small PC distributors are suitable for indoor and outdoor mounting. Rated current: 63 A Lost power at 40 K: 20.7 W

2008808

SDB 09 PS

-

DISTRIBUTION BOX 9 DISP PS

Distribution box, 9 division units, with terminal strip, polystyrene. Distribution box with terminal strip for surface mounting, for the current sub-distribution in interior and protected exterior areas, in accordance with IEC 439-3. With pre-mounted 35 mm hat profile rail. IP66 protection type and IK07 protection rating. Transparent cover to screw on, with cut-out.- Protection-insulated for a maximum of 9 division units- Terminal strip set consisting of: Two each of: PE/N terminals with 4x 16 mm² screw terminals, mini hat profile rail, mounting instructions and fastening set- Identification plates for connected consumers- 6 elastic cable entries Ø20 mm for cable diameters of 0-17 mm- 1 elastic cable entry Ø25 mm for cable diameters of 0–22 mm- 1 elastic cable entry Ø32 mm for cable diam

2008804

SDB 05 PS

-

DISTRIBUTION BOX 5 DISP PS

Distribution box, 5 division units, with terminal strip, polystyrene. Distribution box with terminal strip for surface mounting, for the current sub-distribution in interior and protected exterior areas, in accordance with IEC 439-3. With pre-mounted 35 mm hat profile rail. IP66 protection type and IK07 protection rating. Transparent cover to screw on, with cut-out.- Protection-insulated for a maximum of 5 division units- Terminal strip set consisting of: One each of: PE/N terminal with 4x 16 mm² screw terminals, mini hat profile rail, mounting instructions and fastening set- Identification plates for connected consumers- 4 elastic cable entries Ø20 mm for cable diameters of 0–17 mm- 1 elastic cable entry Ø25 mm for cable diameters of 0–22 mm- 4 Ø 20 mm break-out openings each at the top

2008800

SDB 03 PS

-

DISTRIBUTION BOX 3 DISP PS

Distribution box, 3 division units, with terminal strip, polystyrene. Distribution box with terminal strip for surface mounting, for the current sub-distribution in interior and protected exterior areas, in accordance with IEC 439-3. With pre-mounted 35 mm hat profile rail. IP66 protection type and IK07 protection rating. Transparent cover to screw on, with cut-out.- Protection-insulated for a maximum of 3 division units- Terminal strip set consisting of: One each of: PE/N terminal with 4x 16 mm² screw terminals, mini hat profile rail, mounting instructions and fastening set- Identification plates for connected consumers- 2 elastic cable entries Ø20 mm for cable diameters of 0–17 mm- 1 elastic cable entry Ø25 mm for cable diameters of 0–22 mm- 2 Ø 20 mm break-out openings each at the top

2008820

SDB 03L PS

-

BOX, DISTR.WITHOUT POWER STRIP,3 DISP

Small SDB 03L PS distribution board, without strip, 3 devices 150x190x125 Polystyrene, PS,

Small 3-part distributor, vacuum, polystyrene

2008824

SDB 05L PS

-

BOX, DISTR.WITHOUT POWER STRIP,5 DISP

Distribution box, 5 division units, empty, polystyrene. Distribution box for surface mounting, for the current sub-distribution in interior and protected exterior areas, in accordance with IEC 439-3. With pre-mounted 35 mm hat profile rail. IP66 protection type and IK07 protection rating. Transparent cover to screw on, with cut-out.- Protection-insulated for a maximum of 5 division units- 4 Ø 20 mm break-out openings each at the top and bottom- 1 Ø 20/25 mm combination break-out opening each at the top and bottom- 4 screw cover capsNominal current 40 APower loss at 40 K 19 W

2008828

SDB 09L PS

-

BOX, DISTR.WITHOUT POWER STRIP,9 DISP

Distribution box, 9 division units, empty, polystyrene. Distribution box for surface mounting, for the current sub-distribution in interior and protected exterior areas, in accordance with IEC 439-3. With pre-mounted 35 mm hat profile rail. IP66 protection type and IK07 protection rating. Transparent cover to screw on, with cut-out.- Protection-insulated for a maximum of 9 division units- 8 Ø 20 mm break-out openings each at the top and bottom- 1 Ø 20/25/32 mm combination break-out opening each at the top and bottom- 4 screw cover capsNominal current 63 APower loss at 40 K 20.7 W

677.3036.2-HW

677.3036.2-HW

-

CONSUMER UNIT GW850°C-3 ROWS-36 DIN

EMPOTR DISTRIBUTION BOX. IP40

IP40 HOLLOW WALL 36+6 MOD. 368x568x90mm WHITE