> EATON - MOELLER>Position Switches >HH-K 063267 ELECTRIC Actuating rod insulated material
Previous Product Next Product
HH-K 063267 EATON ELECTRIC Actuating rod insulated material View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

HH-K 063267 EATON ELECTRIC Actuating rod insulated material

HH-K

063267

EATON-MOELLER

Actuating rod insulated material

Drive head; Insulating actuating rod

Actuating rod, Components, Part group reference: AT4, Function: Actuating rod, Description: For adding R-AT4 rotary drive, With plastic rod, Not to be used as a safety position switch, Max. operating speed lateral: 1.4, Lever length: 190 mm, For use with: R-AT4, Snap-action contact: Only permissible with snap-action contact

More details


Sensors > Drive head for position switches/hinge switches

Position Switches

Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

▲

More info

▲


EL-Nummer (Norway)
4355957
Actuating rod insulated material
Actuating rod, Components, Part group reference: AT4, Function: Actuating rod, Description: For adding R-AT4 rotary drive, With plastic rod, Not to be used as a safety position switch, Max. operating speed lateral: 1.4, Lever length: 190 mm, For use with: R-AT4, Snap-action contact: Only permissible with snap-action contact

Delivery program

Basic function
Components
Part group reference
AT4
Product range
Actuators
Function
Actuating rod
Description
For adding R-AT4 rotary drive
With plastic rod
Not to be used as a safety position switch
Max. operating speed lateral
1.4
Lever length [l]
190 mm
For use with
R-AT4
Snap-action contact
Only permissible with snap-action contact

Design verification as per IEC/EN 61439

Technical data for design verification
Rated operational current for specified heat dissipation [In]
0 A
Heat dissipation per pole, current-dependent [Pvid]
0 W
Equipment heat dissipation, current-dependent [Pvid]
0 W
Static heat dissipation, non-current-dependent [Pvs]
0 W
Heat dissipation capacity [Pdiss]
0 W
Operating ambient temperature min.
-25 °C
Operating ambient temperature max.
+70 °C
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Please enquire
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
Not applicable.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Technical data ETIM 7.0

Sensors (EG000026) / Drive head for position switches/hinge switches (EC001483)
Electric engineering, automation, process control engineering / Binary sensor technology, safety-related sensor technology / Position switch / Drive head for position switches ([email protected] [BAA083012])
Type of control element
Actuating rod

ETIM for 063267 Sensors (EC001483)
Feature Name Feature Value
Type of control element (EF006976) Actuating rod

Datasheet - PDF

▲
Title: Size: Type:
PDF CATALOGUE EATON EN .pdf 38 Mbytes
HH-K HH-K 063267 EN_063267.pdf 121 Kbytes HH-K HH-K 063267 EN_063267.pdf

Reviews (0) ▲

No customer reviews for the moment.

Add Review
Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
Do you recommend this product to buy?
  Captcha
  Add review

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.

Newsletter
Follow us
My account