Combined arrester for power supply systems

2905465

FLT-SEC-T1+T2-1C-350/25-FM

FLT‐CP‐1C‐350 2859741

Type 1+2 protective device combination

Combination of pluggable lightning and surge arresters, according to type 1+2/class I+II, for single-phase power grids, with combined PE and N laying in one conductor (L1, PEN).

Plug-in lightning and surge arrester combination, in accordance with Type 1+2/Class I+II, for 1-phase power supply networks, with combined PE and N installed in one conductor (L1, PEN).

2905466

FLT-SEC-T1+T2-1S-350/25-FM

FLT‐CP‐1S‐350 2859738

Type 1+2 protective device combination

Combination of pluggable lightning and surge arresters, according to type 1+2/class I+II, for single-phase power supply networks, with separate N and PE (L1, PE, N).

Combination of plug-in surge and atmospheric current arresters, according to type 1+2 / class I+II, for single-phase power supply networks with separate PE and N (L1, PE, N).

2905467

FLT-SEC-T1+T2-2C-350/25-FM

FLT‐CP‐2C‐350 2859770

Type 1+2 protective device combination

Combination of pluggable lightning and surge arresters, according to type 1+2/class I+II, for two-phase power grids, with combined PE and N routing in one conductor (L1, L2, PEN).

Plug-in lightning and surge arrester combination, in accordance with Type 1+2/Class I+II, for 2-phase power supply networks, with combined PE and N installed in one conductor (L1, L2, PEN).

2905468

FLT-SEC-T1+T2-2S-350/25-FM

FLT‐CP‐2S350 2859767

Type 1+2 protective device combination

Combination of pluggable lightning and surge arresters, according to type 1+2/class I+II, for two-phase power grids, with separate N and PE (L1, L2, PE, N).

Plug-in lightning and surge arrester combination, in accordance with Type 1+2/Class I+II, for 2-phase power supply networks, with separate N and PE (L1, L2, PE, N).

2905469

FLT-SEC-T1+T2-3C-350/25-FM

FLT‐CP‐3C350 2859725

Type 1+2 protective device combination

Combination of pluggable lightning and surge arresters, according to type 1+2/class I+II, for three-phase power grids, with combined PE and N routing in one conductor (L1, L2, L3, PEN).

Plug-in lightning and surge arrester combination, in accordance with Type 1+2/Class I+II, for 3-phase power supply networks, with combined PE and N installed in one conductor (L1, L2, L3, PEN).

2905470

FLT-SEC-T1+T2-3S-350/25-FM

FLT‐CP‐3S350 2859712

Type 1+2 protective device combination

Combination of pluggable lightning and surge arresters, according to type 1+2/class I+II, for three-phase power grids, with separate N and PE (L1, L2, L3, PE, N).

Combination of pluggable lightning and surge arresters, according to type 1+2/class I+II, for three-phase power grids, with separate N and PE (L1, L2, L3, PE, N).

2CTB815710R1300

2CTB815710R1300

-

OVR T1-T2 1N 12.5-275s P QS

Prot. envelope OVRT1-T21N12.5-275sPQS

OVR T1-T2 1N 12.5-275s P QS Surge Protective Device

2CTB815710R0100

2CTB815710R0100

-

OVR T1-T2 1N 12.5-275s P TS QS

Prot.sobret. OVRT1-T21N12.5-275sPTSQS

Prot.sobret. OVRT1-T21N12.5-275sPTSQS

SA1B1NA320R

SA1B1NA320R

-

SURGE PROTECTION DEVICE TYPE 1 AND 2 MONOBLOCK, IEC IMPULSE CURRENT IIMP (10/350ΜS) 25KA PER POLE, 1P+N. WITH CONTACT REMOTE

SURGE PROTECTION DEVICE TYPE 1-2 1P+N

Surge protection device type 1 and 2 monoblock, IEC impulse current Iimp (10/350μs) 25kA per pole, 1P+N. With remote contact

SA1B1PA320R

SA1B1PA320R

-

SURGE PROTECTION DEVICE TYPE 1 AND 2 MONOBLOCK, IEC IMPULSE CURRENT IIMP (10/350ΜS) 25KA PER POLE, 1P. WITH CONTACT REMOTE

SURGE PROTECTION DEVICE TYPE 1-2 1P

Surge protection device type 1 and 2 monoblock, IEC impulse current Iimp (10/350μs) 25kA per pole, 1P. With remote contact

SA1B2PA320R

SA1B2PA320R

-

SURGE PROTECTION DEVICE TYPE 1 AND 2 MONOBLOCK, IEC IMPULSE CURRENT IIMP (10/350ΜS) 25KA PER POLE, 2P. WITH CONTACT REMOTE

SURGE PROTECTION DEVICE TYPE 1-2 2P

Surge protection device type 1 and 2 monoblock, IEC impulse current Iimp (10/350μs) 25kA per pole, 2P. With remote contact

SA1B3PA320R

SA1B3PA320R

-

SURGE PROTECTION DEVICE TYPE 1 AND 2 MONOBLOCK, IEC IMPULSE CURRENT IIMP (10/350ΜS) 25KA PER POLE, 3P. WITH CONTACT REMOTE

SURGE PROTECTION DEVICE TYPE 1-2 3P

Surge protection device type 1 and 2 monoblock, IEC impulse current Iimp (10/350μs) 25kA per pole, 3P. With remote contact

SA1B4PA320R

SA1B4PA320R

-

SURGE PROTECTION DEVICE TYPE 1 AND 2 MONOBLOCK, IEC IMPULSE CURRENT IIMP (10/350ΜS) 25KA PER POLE, 4P. WITH CONTACT REMOTE

SURGE PROTECTION DEVICE TYPE 1-2 4P

Surge protection device type 1 and 2 monoblock, IEC impulse current Iimp (10/350μs) 25kA per pole, 4P. With remote contact

SA1B3NA320R

SA1B3NA320R

-

SURGE PROTECTION DEVICE TYPE 1 AND 2 MONOBLOCK, IEC IMPULSE CURRENT IIMP (10/350ΜS) 25KA PER POLE, 3P+N. WITH CONTACT REMOTE

SURGE PROTECTION DEVICE TYPE 1-2 3P+N

Surge protection device type 1 and 2 monoblock, IEC impulse current Iimp (10/350μs 25kA per pole, 3P+N. With remote contact

184749

SPBT12-NPE50

Y7-184749

Lightning current and surge arresters, 50kA, N-space unit

SPBT12-NPE50

Eaton Moeller series xPole - SPBT12 Surge Protection Device. Lightning current and surge arresters, 50kA, N-space unit

184750

SPBT12-280-3+NPE50

Y7-184750

Lightning current and surge arresters, 50kA, N-space unit

SPBT12-280-3+NPE50

Eaton Moeller series xPole - SPBT12 Surge Protection Device. Lightning current and surge arresters, 50kA, N-space unit, 3+NPE50

184752

SPBT12-280-1+NPE50

Y7-184752

Lightning current and surge arresters, 50kA, N-space unit

SPBT12-280-1+NPE50

Eaton Moeller series xPole - SPBT12 Surge Protection Device. Lightning current and surge arresters, 50kA, N-space unit, 1+NPE50

5093533

V50-3+NPE+FS-280

-

ARRESTER 1+2 V50-3+NPE+FS-280

Combination arrester V50, 3-pole + NPE with FS 280 V. Lightning current combination arrester, type 1+2• For lightning current equipotential bonding to VDE 0185-305 (IEC 62305)• Lightning current arresting capacity of 12.5 kA (10/350) per pole and up to 50 kA (10/350) in total• Modular, plug-in arrester with cut-off unit and visual status display • Locking mechanism with vibration protection and voltage keying • Plastic to UL 94 V-0• The remote signalling (FS) variants have a potential-free changeover contact for remote signalling Application: Lightning current equipotential bonding for buildings of class III and IV.* Complete = Plug-in arrester and base

5093594

VG-V50-1+NPE-280

-

DESCRG. 1+2 V50-1+NPE-280 N/BOX

Combination arrester V50, 1-pole + NPE 280 V. Lightning current combination arrester, type 1+2 to DIN EN 61643-11 • For lightning protection equipotential bonding to VDE 0185-305 (IEC 62305)• Complete unit, pre-mounted and ready for connection in polycarbonate housing (IP66)• Lightning current arresting capacity 12.5 kA (10/350) per pole and up to 50 kA (10/350) in totalApplication: Lightning protection equipotential bonding for buildings of Class III and IV.If there is a danger of condensation forming through wind, ice, temperature or sunlight, further measures may be necessary!* Complete = upper part and base

5093592

V50-3+NPE+FS-385

-

ARRESTER 1+2 V50-3+NPE+FS-385

5093590

V50-1+NPE+FS-385

-

ARRESTER 1+2 V50-1+NPE+FS-385

Combination arrester V50, 1-pole + NPE with FS 385 V. Lightning current combination arrester, type 1+2• For lightning current equipotential bonding to VDE 0185-305 (IEC 62305)• Lightning current arresting capacity of 12.5 kA (10/350) per pole and up to 50 kA (10/350) in total• Modular, plug-in arrester with cut-off unit and visual status display • Locking mechanism with vibration protection and voltage keying • Plastic to UL 94 V-0• The remote signalling (FS) variants have a potential-free changeover contact for remote signalling Application: Lightning current equipotential bonding for buildings of class III and IV.* Complete = Plug-in arrester and base

5093440

V50-1-150

-

ARRESTER 1+2 V50-1-150

5093572

V50-1-385

-

ARRESTER 1+2 V50-1-385

Combination arrester V50, 1-pole 385 V. Lightning current combination arrester, type 1+2• For lightning current equipotential bonding to VDE 0185-305 (IEC 62305)• Lightning current arresting capacity of 12.5 kA (10/350) per pole and up to 50 kA (10/350) in total• Modular, plug-in arrester with cut-off unit and visual status display • Locking mechanism with vibration protection and voltage keying • Plastic to UL 94 V-0• The remote signalling (FS) variants have a potential-free changeover contact for remote signalling Application: Lightning current equipotential bonding for buildings of class III and IV.* Complete = Plug-in arrester and base

5093574

V50-3-385

-

ARRESTER 1+2 V50-3-385

5093578

V50-1+FS-385

-

ARRESTER 1+2 V50-1+FS-385

Combination arrester V50, 1-pole with FS 385 V. Lightning current combination arrester, type 1+2• For lightning current equipotential bonding to VDE 0185-305 (IEC 62305)• Lightning current arresting capacity of 12.5 kA (10/350) per pole and up to 50 kA (10/350) in total• Modular, plug-in arrester with cut-off unit and visual status display • Locking mechanism with vibration protection and voltage keying • Plastic to UL 94 V-0• The remote signalling (FS) variants have a potential-free changeover contact for remote signalling Application: Lightning current equipotential bonding for buildings of class III and IV.* Complete = Plug-in arrester and base

5093448

V50-3+FS-150

-

ARRESTER 1+2 V50-3+FS-150

Combination arrester V50, 3-pole with FS 150 V. Lightning current combination arrester, type 1+2• For lightning current equipotential bonding to VDE 0185-305 (IEC 62305)• Lightning current arresting capacity of 12.5 kA (10/350) per pole and up to 50 kA (10/350) in total• Modular, plug-in arrester with cut-off unit and visual status display • Locking mechanism with vibration protection and voltage keying • Plastic to UL 94 V-0• The remote signalling (FS) variants have a potential-free changeover contact for remote signalling Application: Lightning current equipotential bonding for buildings of class III and IV.* Complete = Plug-in arrester and base

5093552

V50-1+NPE-320

-

ARRESTER 1+2 V50-1+NPE-320

5093554

V50-3+NPE-320

-

ARRESTER 1+2 V50-3+NPE-320

Combination arrester V50, 3-pole + NPE 320 V. Lightning current combination arrester, type 1+2• For lightning current equipotential bonding to VDE 0185-305 (IEC 62305)• Lightning current arresting capacity of 12.5 kA (10/350) per pole and up to 50 kA (10/350) in total• Modular, plug-in arrester with cut-off unit and visual status display • Locking mechanism with vibration protection and voltage keying • Plastic to UL 94 V-0• The remote signalling (FS) variants have a potential-free changeover contact for remote signalling Application: Lightning current equipotential bonding for buildings of class III and IV.* Complete = Plug-in arrester and base

5093454

V50-3+NPE-150

-

ARRESTER 1+2 V50-3+NPE-150

Combination arrester V50, 3-pole + NPE 150 V. Lightning current combination arrester, type 1+2• For lightning current equipotential bonding to VDE 0185-305 (IEC 62305)• Lightning current arresting capacity of 12.5 kA (10/350) per pole and up to 50 kA (10/350) in total• Modular, plug-in arrester with cut-off unit and visual status display • Locking mechanism with vibration protection and voltage keying • Plastic to UL 94 V-0• The remote signalling (FS) variants have a potential-free changeover contact for remote signalling Application: Lightning current equipotential bonding for buildings of class III and IV.* Complete = Plug-in arrester and base

5093452

V50-1+NPE-150

-

ARRESTER 1+2 V50-1+NPE-150

Combined discharger V50 V50-1+NPE-150.1 pole with NPE 150V Polyamide, PA,