Cart
0
Product
Products
(empty)
No products
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total
View larger
6ES7174-0AA10-0AA0 SIEMENS SIMATIC S7-300, Interface module IM174, for connection of analog drives and stepp..
6ES7174-0AA10-0AA0
SIEMENS
SIMATIC S7-300, Interface module IM174, for connection of analog drives and stepper drives on isochronous PROFIBUS to Motion Control systems 4 channels (4 encoder inputs, 4 AO), configurable with STEP 7 V5.4 SP4
PLC's > PLC function/technology module
AUTOMATION SYSTEMS > SIMATIC S7-300 / F
* Brand new product in its original packaging covered by the warranties and certifications provided by SIEMENS
Best sellers
▲More info
▲ETIM: EC001422 - PLC function/technology module
| Value | Unit | |
|---|---|---|
| Number of functions (EF003244) | - | |
| Redundancy (EF003156) | false | |
| Suitable for counting (EF003248) | false | |
| Suitable for weighing (EF003249) | false | |
| Suitable for temperature control (EF008344) | false | |
| Suitable for welding control (EF003251) | false | |
| Suitable for pressure control (EF003252) | false | |
| Suitable for NC (EF003253) | false | |
| Suitable for electronic positioning (EF003255) | true | |
| Suitable for CNC (EF003256) | false | |
| Suitable for SSI (EF003254) | true | |
| Suitable for incremental data detection (EF003258) | true | |
| Suitable for detection absolute value (EF003259) | true | |
| Suitable for flux controller (EF003260) | false | |
| Suitable for flux measurement (EF003261) | false | |
| Suitable for path controller (EF003262) | true | |
| Suitable for cam controller (EF003263) | false | |
| Suitable for flying saw (EF003264) | false | |
| Suitable for multi-axis control (EF003265) | false | |
| Single-axis controller possible (EF003266) | true | |
| Suitable for multi-axis positioning (EF003267) | false | |
| Single-axis positioning possible (EF003268) | true | |
| Suitable for safety functions (EF001597) | false | |
| Category according to EN 954-1 (EF006782) | - | |
| SIL according to IEC 61508 (EF009889) | - | |
| Performance level according to EN ISO 13849-1 (EF007399) | - | |
| Appendant operation agent (Ex ia) (EF004141) | false | |
| Appendant operation agent (Ex ib) (EF004142) | false | |
| Explosion safety category for gas (EF003997) | ATEX gas-ex-protection, Cat. 3G | |
| Explosion safety category for dust (EF003998) | None | |
| Width (EF000008) | 160.0 | mm |
| Height (EF000040) | 125.0 | mm |
| Depth (EF000049) | 118.0 | mm |
| SIMATIC S7-300, Interface module IM174, for connection of analog drives and stepper drives on isochronous PROFIBUS to Motion Control systems 4 channels (4 encoder inputs, 4 AO), configurable with STEP 7 V5.4 SP4 | ||
| Supply voltage | ||
| Rated value (DC) | 24 V | |
| permissible range, lower limit (DC) | 20.4 V | |
| permissible range, upper limit (DC) | 28.8 V | |
| Input current | ||
| Current consumption, max. | 500 mA | |
| from backplane bus 5 V DC, max. | 100 mA | |
| Encoder supply | ||
| 5 V encoder supply | ||
| ● 5 V | Yes | |
| ● Output current, max. | 1.2 A | |
| ● Cable length, max. | 25 m | |
| 24 V encoder supply | ||
| ● 24 V | Yes | |
| ● Output current, max. | 1.4 A | |
| ● Cable length, max. | 100 m | |
| Absolute encoder (SSI) encoder supply | ||
| ● Absolute encoder (SSI) | Yes | |
| ● Short-circuit protection | Yes | |
| Power loss | ||
| Power loss, typ. | 12 W | |
| Digital inputs | ||
| Number of digital inputs | 10 | |
| Input voltage | ||
| ● for signal "0" | -3 to +5V | |
| ● for signal "1" | +11 to +30V | |
| Input current | ||
| ● for signal "0", max. (permissible quiescent current) | 2 mA | |
| ● for signal "1", typ. | 8 mA | |
| Input delay (for rated value of input voltage) | ||
| for standard inputs | ||
| — at "0" to "1", min. | 15 µs | |
| Cable length | ||
| ● shielded, max. | 100 m | |
| Digital outputs | ||
| Number of digital outputs | 8 | |
| Short-circuit protection | Yes | |
| Switching capacity of the outputs | ||
| ● with resistive load, max. | 1 A | |
| ● on lamp load, max. | 30 W | |
| Output voltage | ||
| ● Rated value (DC) | 24 V; L+ | |
| ● for signal "1", min. | L+ (-3 V) | |
| ● for signal "1", max. | 3 V | |
| Output current | ||
| ● for signal "1" permissible range for 0 to 55 °C, min. | 5 mA | |
| ● for signal "1" permissible range for 0 to 55 °C, max. | 300 mA | |
| ● for signal "0" residual current, max. | 0.4 mA | |
| Output delay with resistive load | ||
| ● "0" to "1", max. | 500 µs | |
| Switching frequency | ||
| ● with resistive load, max. | 500 Hz | |
| ● with inductive load, max. | 0.5 Hz | |
| Relay outputs | ||
| ● Number of relay outputs | 4 | |
| ● Number of operating cycles, max. | 50 000 | |
| Switching capacity of contacts | ||
| — with resistive load, max. | 1 A | |
| Cable length | ||
| ● shielded, max. | 600 m | |
| Analog outputs | ||
| Number of analog outputs | 4 | |
| Output ranges, voltage | ||
| ● -10 V to +10 V | Yes | |
| Analog value generation for the outputs | ||
| Integration and conversion time/resolution per channel | ||
| ● Resolution with overrange (bit including sign), max. | 15 bit | |
| Encoder | ||
| Number of connectable encoders, max. | 4 | |
| Connectable encoders | ||
| ● Incremental encoder (symmetrical) | Yes | |
| ● Absolute encoder (SSI) | Yes | |
| ● 2-wire sensor | Yes | |
| — permissible quiescent current (2-wire sensor), max. | 2 mA | |
| Encoder signals, incremental encoder (symmetrical) | ||
| ● Trace mark signals | A, notA, B, notB | |
| ● Zero mark signal | N, notN | |
| ● Input voltage | 5 V difference signal (phys. RS 422) | |
| ● Input frequency, max. | 1 MHz | |
| ● Cable length, shielded, max. | 35 m; 35 m at max. 500 kHz; 10 m at max. 1 MHz | |
| Encoder signals, absolute encoder (SSI) | ||
| ● Input signal | 5 V difference signal (phys. RS 422) | |
| ● Data signal | DATA, notDATA | |
| ● Clock signal | CL, notCL | |
| ● Telegram length, parameterizable | 13, 21, 24 bit | |
| ● Clock frequency, max. | 1.5 MHz; 187.5 KHz 1.5 MHz (parameterizable) | |
| ● Binary code | Yes | |
| ● Gray code | Yes | |
| ● Cable length, shielded, max. | 250 m; 250 m at 187.5 kHz, 10 m at 1.5 MHz | |
| Interrupts/diagnostics/status information | ||
| Alarms | ||
| ● Diagnostic alarm | Yes | |
| Drive interface | ||
| Number of drive interfaces | 4 | |
| Analog drive | ||
| Setpoint signal | ||
| — Short-circuit proof | Yes; max. 45 mA, min. 3.3 kOhm load impedance | |
| — Rated voltage range | -10.5 V to +10.5 V | |
| — Output current | -3 to +3 mA | |
| Output controller enable | ||
| — Number of relay contacts | 4 | |
| — Switching voltage, max. | 30 V | |
| — Switching current, max. | 1 A | |
| — Switching capacity, max. | 30 V·A | |
| — Number of switching cycles, min. | 50 000; at 30 V DC, 1 A | |
| — Cable length, shielded, max. | 35 m | |
| Stepper drive | ||
| ● Differential output voltage, min. | 2 V; R = 100 Ohm | |
| ● Differential output voltage for signal "0", max. | 1 V; For I = -20 mA | |
| ● Differential output voltage for signal "1", min. | 3.7 V; 3.7 V at I = -20 mA; 4.5 V at I = -100 µA, | |
| ● Load resistance, min. | 55 Ω | |
| ● Output current, max. | 60 mA | |
| ● Pulse frequency | 750 kHz | |
| ● Cable length, shielded, max. | 50 m; in hybrid operation with analog axes 35 m, in asymmetrical transmission 10 m | |
| Potential separation | ||
| Potential separation digital inputs | ||
| ● Potential separation digital inputs | Yes; to encoders, analog outputs, DP interface; no to other DI/DOs | |
| Potential separation digital outputs | ||
| ● Potential separation digital outputs | Yes; to encoders, analog outputs, DP interface; no to other DI/DOs | |
| Ambient conditions | ||
| Ambient temperature during operation | ||
| ● min. | 0 °C | |
| ● max. | 55 °C | |
| Ambient temperature during storage/transportation | ||
| ● min. | -40 °C | |
| ● max. | 70 °C | |
| Connection method | ||
| required front connector | 40-pin | |
| Dimensions | ||
| Width | 160 mm | |
| Height | 125 mm | |
| Depth | 118 mm | |
| Weights | ||
| Weight, approx. | 1 kg | |
| last modified: | 08/28/2020 | |
| Product | ||||||||||||||||||||||||||||||||||||||||
| Article Number (Market Facing Number) | 6ES7174-0AA10-0AA0 | |||||||||||||||||||||||||||||||||||||||
| Product Description | SIMATIC S7-300, Interface module IM174, for connection of analog drives and stepper drives on isochronous PROFIBUS to Motion Control systems 4 channels (4 encoder inputs, 4 AO), configurable with STEP 7 V5.4 SP4 | |||||||||||||||||||||||||||||||||||||||
| Product family | IM 174 PROFIBUS module | |||||||||||||||||||||||||||||||||||||||
| Product Lifecycle (PLM) | PM300:Active Product | |||||||||||||||||||||||||||||||||||||||
| PLM Effective Date | Product phase-out since: 01.10.2020 | |||||||||||||||||||||||||||||||||||||||
| Price data | ||||||||||||||||||||||||||||||||||||||||
| Price Group | 230 | |||||||||||||||||||||||||||||||||||||||
| Surcharge for Raw Materials | None | |||||||||||||||||||||||||||||||||||||||
| Metal Factor | None | |||||||||||||||||||||||||||||||||||||||
| Delivery information | ||||||||||||||||||||||||||||||||||||||||
| Export Control Regulations | AL : N / ECCN : EAR99H | |||||||||||||||||||||||||||||||||||||||
| Standard lead time ex-works | 1 Day/Days | |||||||||||||||||||||||||||||||||||||||
| Net Weight (kg) | 1,032 Kg | |||||||||||||||||||||||||||||||||||||||
| Product Dimensions (W x L x H) | Not available | |||||||||||||||||||||||||||||||||||||||
| Packaging Dimension | 15,50 x 16,80 x 12,90 | |||||||||||||||||||||||||||||||||||||||
| Package size unit of measure | CM | |||||||||||||||||||||||||||||||||||||||
| Quantity Unit | 1 Piece | |||||||||||||||||||||||||||||||||||||||
| Packaging Quantity | 1 | |||||||||||||||||||||||||||||||||||||||
| Additional Product Information | ||||||||||||||||||||||||||||||||||||||||
| EAN | 6940408100053 | |||||||||||||||||||||||||||||||||||||||
| UPC | 040892549751 | |||||||||||||||||||||||||||||||||||||||
| Commodity Code | 85389091 | |||||||||||||||||||||||||||||||||||||||
| LKZ_FDB/ CatalogID | ST73 | |||||||||||||||||||||||||||||||||||||||
| Product Group | 4032 | |||||||||||||||||||||||||||||||||||||||
| Group Code | R111 | |||||||||||||||||||||||||||||||||||||||
| Country of origin | China | |||||||||||||||||||||||||||||||||||||||
| Compliance with the substance restrictions according to RoHS directive | Since: 31.12.2008 | |||||||||||||||||||||||||||||||||||||||
| Product class | A: Standard product which is a stock item could be returned within the returns guidelines/period. | |||||||||||||||||||||||||||||||||||||||
| WEEE (2012/19/EU) Take-Back Obligation | Yes | |||||||||||||||||||||||||||||||||||||||
| REACH Art. 33 Duty to inform according to the current list of candidates |
| |||||||||||||||||||||||||||||||||||||||
| Classifications | ||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOGUE SIEMENS EN.pdf | 120 Mbytes |
|
| 6ES7174-0AA10-0AA0 6ES7174-0AA10-0AA0 EN_6ES7174-0AA10-0AA0.pdf | 115 Kbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
Add Review
hide form
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.