Product successfully added to your shopping cart
VAL-MS 600DC/2+V-FM
2800195
PHOENIX_CONTACT
1
Type 2 surge protection device
Surge arrester for 2-pos. isolated and grounded DC voltage systems 600 V DC, for DIN rail mounting, 3-pos. base element (L+, L-, ground) with remote indication contact, three pluggable temperature-monitored varistors, status message on each connector.
Home > PHOENIX CONTACT
Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
| Product type | PV arrester |
| Product family | VALVETRAB MS |
| IEC test classification | II |
| T2 | |
| EN type | T2 |
| Type | DIN rail module, two-section, divisible |
| Number of positions | 3 |
| Surge protection fault message | Optical, remote indicator contact |
| Nominal voltage UN | 600 V DC (Open-circuit voltage UOC) |
| Indicator/remote signaling | |
| Switching function | Changeover contact, 1-pos. |
| Maximum operating voltage Umax.AC | 250 V AC |
| Max. operating current Imax | 1.5 A AC (250 V AC) |
| 1.5 A DC (30 V DC) | |
| Connection method | Screw connection |
| Screw thread | M5 |
| Tightening torque, min | 4.5 Nm |
| Tightening torque | 30 lbf-in. (UL) |
| Stripping length | 16 mm |
| Conductor cross section flexible min. | 1.5 mm² |
| Conductor cross section flexible max. | 25 mm² |
| Conductor cross section, rigid min. | 1.5 mm² |
| Conductor cross section, rigid max. | 35 mm² |
| Conductor cross section AWG | 10 ... 2 (UL) |
| Connection method | MC 1,5/3 |
| Screw thread | M2 |
| Tightening torque, min | 0.25 Nm |
| Tightening torque | 4 lbf-in. (UL) |
| Stripping length | 7 mm |
| Conductor cross section flexible min. | 0.14 mm² |
| Conductor cross section flexible max. | 1.5 mm² |
| Conductor cross section, rigid min. | 0.14 mm² |
| Conductor cross section, rigid max. | 1.5 mm² |
| Conductor cross section AWG | 30 ... 14 (UL) |
| Dimensional drawing | ![]() |
| Width | 53.4 mm |
| Height | 99 mm |
| Depth | 65.5 mm |
| Horizontal pitch | 3 Div. |
| Flammability rating according to UL 94 | V0 |
| Housing material | PBT/PA |
| Mechanical data | |
| Open side panel | No |
| Direction of action | (L+)-PE & (L-)-PE & (L+)-(L-) |
| Maximum continuous voltage UC | 600 V DC |
| Rated load current IL | ≤ 80 A DC |
| Residual current IPE | ≤ 20 µA |
| Standby power consumption PC | ≤ 12 mW |
| Nominal discharge current In(8/20) µs | 15 kA |
| Maximum discharge current Imax(8/20) µs | 40 kA |
| Voltage protection level Up | ≤ 3 kV (15 kA) |
| ≤ 3.6 kV (20 kA) | |
| Voltage protection level Up(L+) - (L-) | ≤ 3 kV |
| Voltage protection level Up(L+/L-) - PE | ≤ 3 kV |
| Response time tA | ≤ 25 ns |
| Response time tA(L+) - (L-) | ≤ 25 ns |
| Response time tA(L+/L-) - PE | ≤ 25 ns |
| Protective circuit DC voltage side (DC) | |
| Maximum discharge current Imax(8/20) µs | 40 kA |
| Response time tA | ≤ 25 ns |
| Response time tA(L+) - (L-) | ≤ 25 ns |
| Response time tA(L+/L-) - PE | ≤ 25 ns |
| Nominal discharge current In(8/20) µs | 15 kA |
| Rated load current IL | ≤ 80 A DC |
| Short-circuit current rating ISCPV | 80 A |
| Residual current IPE | ≤ 20 µA |
| Voltage protection level Up | ≤ 3 kV (15 kA) |
| ≤ 3.6 kV (20 kA) | |
| Voltage protection level Up(L+) - (L-) | ≤ 3 kV |
| Voltage protection level Up(L+/L-) - PE | ≤ 3 kV |
| Standby power consumption PC | ≤ 12 mW |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -40 °C ... 80 °C |
| Air clearances and creepage distances | |
| Standards/regulations | DIN EN 60664-1 / DIN EN 61643-11 |
| Standards | |
| Standards/regulations | DIN EN 61643-11 |
| IEC 61643-1 | |
| IEC 60364-7-712 | |
| Standards/specifications | DIN EN 61643-11/A11 |
| Note | 2007 |
| Standards/specifications | IEC 61643-1 |
| Note | 2005 |
| Standards/specifications | IEC 60364-7-712 |
| Note | 2002 |
| Mounting type | DIN rail: 35 mm |
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.