VAL-MS 600DC-PV/2+V-FM 2800641 PHOENIX CONTACT Surge arrester for 2-pos. isolated 600 V DC voltage systems, .. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

VAL-MS 600DC-PV/2+V-FM 2800641 PHOENIX CONTACT Surge arrester for 2-pos. isolated 600 V DC voltage systems, ..

VAL-MS 600DC-PV/2+V-FM

2800641

PHOENIX_CONTACT

Available

Ship on today

Surge arrester for 2-pos. isolated 600 V DC voltage systems, for DIN rail mounting, 3-pos. base element with remote indication contact, three plug-in temperature-monitored protective elements, status message on each plug.

More details


Programmable Logic Controllers Plcs

TRABTECH Power and Signal Quality - PHOENIX CONTACT

Surge protection - PHOENIX CONTACT

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

QuantityPrice
1+167,85 €
2+163,62 €
3+161,52 €
4+160,18 €
5+159,83 €
*This price is per unit and is the net value (not including taxes if applicable).


Related products

More info



Dimensions

Height99 mm
Width53.4 mm
Depth65.5 mm
Horizontal pitch3 Div.

Ambient conditions

Degree of protectionIP20 (only when all terminal points are used)
Ambient temperature (operation)-40 °C ... 80 °C
Ambient temperature (storage/transport)-40 °C ... 80 °C
Altitude≤ 2000 m (amsl (above mean sea level))
Permissible humidity (operation)5 % ... 95 %
Shock (operation)60g (Half sine/11 ms/3x XYZ)
Vibration (operation)7.5g (5-500 Hz/2.5 h/XYZ)

General

Standards/specificationsEN 50539-11 2013
IEC test classificationPV T2
PV T2
Number of portsOne
SPD failure behaviorOCM (Open-circuit mode)
Connection configurationY configuration
SPD designVoltage-limiting type
Installation locationInside
AccessibilityAccessible
Installation location of the disconnect deviceInternal
Mounting typeDIN rail: 35 mm
Colorjet black RAL 9005
Housing materialPA 6.6-FR
PBT-FR
Pollution degree2
Distance between live and grounded parts8 mm
Flammability rating according to UL 94V-0
TypeDIN rail module, two-section, divisible
Surge protection fault messageOptical, remote indicator contact

Additional descriptions

NoteThe device is intended for touch proof installation in a housing. Ensure that there is a gap of at least 8 mm between the active and grounded parts in the connection area.

Protective circuit DC voltage side (DC)

Maximum continuous operating voltage UCPV800 V DC
Open circuit voltage UOCSTC≤ 670 V DC
Short-circuit current rating ISCPV1000 A
Continuous operating current ICPV20 µA
Rated load current IL80 A
Residual current IPE≤ 20 µA DC
≤ 300 µA AC
Standby power consumption PC≤ 20 mVA
Nominal discharge current (8/20) µs15 kA
Nominal discharge current In (8/20) µs (L+) - (L-)15 kA
Nominal discharge current In (8/20) µs (L+) - PE15 kA
Nominal discharge current In (8/20) µs (L-) - PE15 kA
Maximum discharge current Imax (8/20) µs40 kA
Maximum discharge current Imax (8/20) µs (L+) - (L-)40 kA
Maximum discharge current Imax (8/20) µs (L+) - PE40 kA
Maximum discharge current Imax (8/20) µs (L-) - PE40 kA
Total discharge current ITotal (8/20) µs40 kA
Voltage protection level Up (L+) - (L-)≤ 2.7 kV
Voltage protection level Up (L+) - PE≤ 2.7 kV
Voltage protection level Up (L-) - PE≤ 2.7 kV
Residual voltage Ures (L+) - (L-)≤ 2.7 kV (at In)
≤ 2.2 kV (at 5 kA)
≤ 2.5 kV (at 10 kA)
≤ 2.9 kV (at 20 kA)
≤ 3.4 kV (at 30 kA)
≤ 3.8 kV (at 40 kA)
Residual voltage Ures (L+) - PE≤ 2.7 kV (at In)
≤ 2.2 kV (at 5 kA)
≤ 2.5 kV (at 10 kA)
≤ 2.9 kV (at 20 kA)
≤ 3.4 kV (at 30 kA)
≤ 3.8 kV (at 40 kA)
Residual voltage Ures (L-) - PE≤ 2.7 kV (at In)
≤ 2.2 kV (at 5 kA)
≤ 2.5 kV (at 10 kA)
≤ 2.9 kV (at 20 kA)
≤ 3.4 kV (at 30 kA)
≤ 3.8 kV (at 40 kA)
Response time tA (L+) - (L-)≤ 25 ns
Response time tA (L+) - PE≤ 25 ns
Response time tA (L-) -PE≤ 25 ns
Insulation resistance Riso> 5 GΩ (at 500 V DC)

Indicator/remote signaling

Connection nameRemote fault indicator contact
Switching functionPDT contact
Operating voltage5 V AC ... 250 V AC
125 V AC (UL)
30 V DC
Operating current5 mA AC ... 1.5 A AC
1 A AC (UL)
1 A DC
Connection methodScrew connection
Screw threadM2
Tightening torque0.25 Nm
4 lbf-in. (UL)
Stripping length7 mm
Conductor cross section flexible min.0.14 mm²
Conductor cross section flexible max.1.5 mm²
Conductor cross section solid min.0.14 mm²
Conductor cross section solid max.1.5 mm²
Conductor cross section AWG28 ... 16
30 ... 14 (UL)

Connection data

Connection methodScrew connection
Conductor cross section flexible min.1.5 mm²
Conductor cross section flexible max.25 mm²
Conductor cross section solid min.1.5 mm²
Conductor cross section solid max.35 mm²
Conductor cross section AWG15 ... 2
10 ... 2 (UL)
Screw threadM5
Tightening torque4.5 Nm
30 lbf-in. (UL)
Stripping length16 mm
Connection methodBiconnect terminal blocks
Conductor cross section flexible min.1.5 mm²
Conductor cross section flexible max.16 mm²
Screw threadM5

UL specifications

SPD Type4 (for Type 2 photovoltaic applications)
Maximum continuous operating voltage MCOV (L+) - (L-)800 V DC
Maximum continuous operating voltage MCOV (L+) - G800 V DC
Maximum continuous operating voltage MCOV (L-) - G800 V DC
Nom. voltage670 V AC
Mode of protection(L+) - (L-)
(L+) - G
(L-) - G
Power distribution system1
Voltage protection rating VPR (L+) - (L-)2.5 kV
Voltage protection rating VPR (L+) - G2.5 kV
Voltage protection rating VPR (L-) -G2.5 kV
Nominal discharge current In (L+) - (L-)20 kA
Nominal discharge current In (L+) - G20 kA
Nominal discharge current In (L-) - G20 kA

Datasheet - PDF

Title:Language:Size:Type:
PHOENIX CONTACT-2800641-VAL-MS 600DC-PV/2+V-FMEnglish128 KbytesPHOENIX CONTACT-2800641-VAL-MS 600DC-PV/2+V-FM

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review