QUINT-PS-100-240AC/48DC/20 2938976 PHOENIX CONTACT DIN rail power supply unit, primary-switched mode, 1-phas.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

QUINT-PS-100-240AC/48DC/20 2938976 PHOENIX CONTACT DIN rail power supply unit, primary-switched mode, 1-phas..

QUINT-PS-100-240AC/48DC/20

2938976

PHOENIX_CONTACT

Available

Ship on today

DIN rail power supply unit, primary-switched mode, 1-phase, output: 48 V DC / 20 A

More details


TRABTECH Power and Signal Quality - PHOENIX CONTACT

Uninterruptible power supply units - PHOENIX CONTACT

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info



Product description

QUINT POWER is the powerful 60 - 960 W DC power supply unit for universal use. With its wide-range input, single and three-phase versions, and international approval package, this solution is unrivalled. QUINT POWER provides reliable power supply: generously dimensioned capacitors ensure mains buffering of over 20 ms at full load. Full output power is provided by all three-phase devices, even in the event of a permanent phase failure. The Power Boost power reserve easily starts loads with high inrush currents and ensures that fuses are reliably tripped. Preventive function monitoring diagnoses impermissible operating states and minimizes downtimes in your system. Remote monitoring is provided by an active transistor switching output and a floating relay contact. All devices are idling-proof and short-circuit-proof, and are available with a regulated and adjustable output voltage of 12, 24, and 48 V DC with output currents of 2.5, 5, 10, 20, 30, and 40 A. Power supply units for use in Ex zone 2, uninterruptible solutions, AS-i power supply units, and a QUINT diode complete this comprehensive product range.

Dimensions

Width240 mm
Height130 mm
Depth125 mm
Width with alternative assembly122 mm
Height with alternative assembly130 mm
Depth with alternative assembly243 mm

Ambient conditions

Degree of protectionIP20
Ambient temperature (operation)-25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Max. permissible relative humidity (operation)95 % (at 25 °C, non-condensing)
Noise immunityEN 61000-6-2:2005

Input data

Nominal input voltage range110 V AC ... 240 V AC (Derating < 100 V AC; 2.5 %/V)
Input voltage range85 V AC ... 264 V AC
90 V DC ... 350 V DC
AC frequency range45 Hz ... 65 Hz
Frequency range DC0 Hz
Nominal power consumption960 W
Inrush surge current< 15 A (typical)
Power failure bypass> 20 ms (120 V AC)
> 20 ms (230 V AC)
Input fuse20 A (fast blow, internal)
Choice of suitable circuit breakers16 A ... 25 A (Characteristics B, C, D, K)
Type of protectionTransient surge protection
Protective circuit/componentVaristor

Output data

Nominal output voltage48 V DC ±1 %
Setting range of the output voltage30 V DC ... 56 V DC (> 48 V DC, constant capacity restricted)
Nominal output current20 A (-25 °C ... 60 °C)
POWER BOOST22.5 A (< 40°C permanent)
Derating60 °C ... 70 °C (2.5%/K)
Connection in parallelYes, for redundancy and increased capacity
Connection in seriesYes
Max. capacitive loadUnlimited
Active current limitationApprox. IBOOST = 22.5 A (for short-circuit)
Control deviation< 1 % (change in load, static 10 % ... 90 %)
< 2 % (change in load, dynamic 10 % ... 90 %)
< 0.1 % (change in input voltage ±10 %)
Residual ripple< 25 mVPP (with nominal values)
Output power960 W
Typical response time< 1 s
Peak switching voltages nominal load< 30 mVPP (20 MHz)
Maximum power dissipation in no-load condition28 W
Power loss nominal load max.80 W

General

Net weight3.5 kg
Operating voltage displayGreen LED
Efficiency> 92 % (for 230 V AC and nominal values)
Insulation voltage input/output4 kV AC (type test)
2 kV AC (routine test)
Protection classI (with PE connection)
MTBF (IEC 61709, SN 29500)> 500000 h
Mounting positionhorizontal DIN rail NS 35, EN 60715
Assembly instructionsCan be aligned: Horizontally 0 mm, vertically 50 mm

Connection data, input

Connection methodScrew connection
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.6 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.4 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.10
Stripping length8 mm
Screw threadM3

Connection data, output

Connection methodScrew connection
Conductor cross section solid min.0.5 mm²
Conductor cross section solid max.16 mm²
Conductor cross section flexible min.0.5 mm²
Conductor cross section flexible max.10 mm²
Conductor cross section AWG min.20
Conductor cross section AWG max.6
Stripping length10 mm
Screw threadM4

Signaling

Output nameDC OK active
Output descriptionUOUT > 0.9 x UN: High signal
Maximum switching voltage≤ 24 V
Output voltage+ 24 V DC
Maximum inrush current≤ 20 mA
Continuous load current≤ 20 mA
Status display"DC OK" LED green
Note on status displayUOUT < 0.9 x UN: LED flashing
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.6 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.4 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.10
Tightening torque, min0.5 Nm
Tightening torque max0.6 Nm
Screw threadM3
Output nameDC OK floating
Output descriptionRelay contact, UOUT > 0.9 x UN: Contact closed
Maximum switching voltage≤ 30 V AC/DC
Maximum inrush current≤ 1 A
Continuous load current≤ 1 A
Status display"DC OK" LED green
Note on status displayUOUT < 0.9 x UN: LED flashing

Datasheet - PDF

Title:Language:Size:Type:
PHOENIX CONTACT-2938976-QUINT-PS-100-240AC/48DC/20English143 KbytesPHOENIX CONTACT-2938976-QUINT-PS-100-240AC/48DC/20

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review