EMD-SL-PTC 2866093 PHOENIX CONTACT Monitoring relay for temperature monitoring of the motor winding (maximum.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

EMD-SL-PTC 2866093 PHOENIX CONTACT Monitoring relay for temperature monitoring of the motor winding (maximum..





Ship on today

Monitoring relay for temperature monitoring of the motor winding (maximum 6 PTC) with error memory for temperature sensors in acc. with DIN 44081, test function with integrated test/reset button, supply voltage can be selected using power module, 2 PDTs

More details

Programmable Logic Controllers Plcs

INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

Energy meters. Monitoring - PHOENIX CONTACT

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

1+84,97 €
3+81,11 €
5+79,70 €
7+78,89 €
9+78,34 €
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info

Product description

Increasingly higher demands are being placed on safety and system availability – across all sectors. Processes are becoming more and more complex, not only in mechanical engineering and the chemical industry, but also in plant and automation technology. Demands on power engineering are also increasing constantly.

Error-free and therefore cost-effective operation can only be achieved through continuous monitoring of important network and system parameters. Electronic monitoring relays in the EMD series are available for a wide range of monitoring tasks to avoid the consequences of errors or to keep them within limits.

The operating states are indicated using colored LEDs, errors that may occur can be sent to a control system via a floating contact or can shut down a part of the system. Some device versions are equipped with startup and response delays in order to briefly tolerate measured values outside the set monitoring range.


Width22.5 mm
Height90 mm
Depth113 mm

Ambient conditions

Ambient temperature (operation)-25 °C ... 55 °C
-25 °C ... 40 °C (corresponds to UL 508)
Ambient temperature (storage/transport)-25 °C ... 70 °C

Input data

Maximum temperature coefficient< 0.1 %/K
FunctionWinding temperature monitoring
Basic accuracy± 10 % (of scale end value)
Repeat accuracy≤ 2 %
Total cold resistance< 1.5 kΩ
Response value≥ 3.6 kΩ (Relay drops out)
Release value≤ 1.8 kΩ (Relay picks up)
Short-circuit detection< 20 Ω
Voltage influence≤ 1 %
Recovery time500 ms

Contact side

Contact type2 floating PDT contacts
Maximum switching voltage250 V AC (in acc. with IEC 60664-1)
Interrupting rating (ohmic load) max.750 VA (3 A/250 V AC, module aligned, ≤ 5 mm spacing)
1250 VA (5 A/250 V AC, module not aligned, ≥ 5 mm spacing)
Output fuse5 A (fast-blow)

Power supply

Supply voltage range24 V AC ... 230 V AC (see Power modules)
24 V DC (see Power modules)


Mechanical service lifeApprox. 2 x 107 cycles
Operating mode100% operating factor
Mounting positionany
Assembly instructionson standard DIN rail NS 35 in accordance with EN 60715
Electromagnetic compatibilityConformance with EMC Directive 2004/108/EC
Overvoltage categoryIII, basic insulation (as per EN 50178)
Housing insulation materialPolyamide PA, self-extinguishing
Rated insulation voltage300 V (According to EN 50178)
UL, USA / CanadaUL/C-UL listed UL 508

Connection data

Conductor cross section flexible min.0.25 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section solid min.0.5 mm²
Conductor cross section solid max.2.5 mm²
Conductor cross section AWG min.20
Conductor cross section AWG max.14
Stripping length8 mm
Connection methodScrew connection

Datasheet - PDF


Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review