Selected parameters MODULE TYPE Accessory HOUSING DIN-rail POWER SUPPLY AC I/O TYPE None NUMBER OF I/O 0 Others MODULE TYPE Dupline seperator HOUSING H2 (W36) I/O TYPE None POWER SUPPLY 230 VAC MAIN CHARACTERISTICS Dupline Seperator that isolates a segment in case of bus short-circuit
Dupline Separator Type G 3282 2002 Duline® FieldbusInstallationbus • Separates primary and secondary side of Dupline®, if a short circuit is detected • Uses 2 channels • Channel coding by GAP 1605 • H2 Housing • For mounting on DIN-rail in accordance with EN 50 022 Product DescriptionOrdering Key G 3282 2002 230 The G3282 2002 is a Dupline® bus separator, which can detect short circuits on the Dupline®bus. When a short circuit is detected, it disconnects the secondary side of the Dupline® bus. The Dupline® bus separator ispartofthesmarthouse concept. It is designed to be used in installations where one MGG is used to con- trol/monitor several apart- ments. If a short circuit appears, only the faulty part of the Dupline® bus will be disconnected from the Dupline®bus. Type: Dupline® H2 Housing Surveillance unit 2 channels Voltage Supply TypeSelection Supply:Ordering no. 230 V G 3282 2002 230 Output Specifications 1 output Dupline®outDupline® Load 50 mA Note:The separatorworksininstallationswitha max cabel resistance on maximum 200 Ω. This is aproximately 2000 meter with the use of 0.75 mm2wire. Supply Specifications Supply230 VAC Power ConsumptionTyp. 2.5 W General Specifications General Specifications (cont.) Housing H2-housing Output settling time / total delay< 2 sec. Indication Dupline® on short (secondary side) Red Supply ON LEDGreen Dupline® carrier LED (primary side)Yellow Relay data Contact maximum switching current3A Contact resistance < 100 mΩ (measuring conditions 10 mA/20mV) Max. Switching voltage250 VAC Contact material Silver, nickel, gold-covered AddressingGAP1605 Environment Degree of protectionIP 20 Pollution degree3 (IEC 60664) Operating temperature0° to +50°C Storage temperature -20° to +85°C Power supply230 VAC ± 15% Galvanic separation from Dupline® Bus Power consumption 2.2 VA Dupline® Dupline® Dimensions 36 x 77 x 70 Humidity (non-condensing)20 to 80% RH Weight200 g Specifications are subject to change without notice (26.11.2008) 1 Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.