Producto añadido correctamente a su carrito de la compra
G32822002230
CARLO GAVAZZI
1
Aislador
Controles > Gestión de Energía, Software y Accesorios
* Producto nuevo en su embalaje original con todas las garantías y certificaciones de CARLO GAVAZZI
Gracias por su interés en nuestros productos, esperamos que el plazo indicado sea conveniente para usted.
Durante la tramitación del pedido podrá seleccionar el tipo de envío que mejor se adapte a sus necesidades: Aéreo Express 24Hrs, Terrestre Standard 48/72Hrs, etc.
Dupline Separator
Type G 3282 2002
Du line®
Fieldbus Installationbus
• Separates primary and secondary side of Dupline®, if a short circuit is detected
• Uses 2 channels
• Channel coding by GAP 1605
• H2 Housing
• For mounting on DIN-rail in accordance with EN 50 022
Product Description Ordering Key
G 3282 2002 230
The G3282 2002 is a Dupline® bus separator, which can detect short circuits on the Dupline® bus. When a short circuit is detected, it disconnects the secondary side of the Dupline® bus.
The Dupline® bus separator is part of the smarthouse
concept. It is designed to be used in installations where one MGG is used to con- trol/monitor several apart- ments. If a short circuit appears, only the faulty part of the Dupline® bus will be disconnected from the Dupline® bus.
Type: Dupline® H2 Housing Surveillance unit
2 channels Voltage Supply
Type Selection
Supply: Ordering no.
230 V G 3282 2002 230
Output Specifications
1 output
Dupline® out Dupline®
Load 50 mA
Note: The separator works in installations with a max cabel resistance on maximum 200 Ω. This is aproximately
2000 meter with the use of 0.75 mm2 wire.
Supply Specifications
Supply 230 VAC
Power Consumption Typ. 2.5 W
General Specifications
General Specifications (cont.)
Housing H2-housing
Output settling time /
total delay < 2 sec.
Indication
Dupline® on short
(secondary side) Red Supply ON LED Green Dupline® carrier LED
(primary side) Yellow
Relay data
Contact maximum switching
current 3A
Contact resistance < 100 mΩ (measuring conditions 10 mA/20mV)
Max. Switching voltage 250 VAC
Contact material Silver, nickel, gold-covered
Addressing GAP1605
Environment
Degree of protection IP 20
Pollution degree 3 (IEC 60664) Operating temperature 0° to +50°C
Storage temperature -20° to +85°C
Power supply 230 VAC ± 15%
Galvanic separation from
Dupline® Bus
Power consumption 2.2 VA Dupline® Dupline® Dimensions 36 x 77 x 70
Humidity (non-condensing) 20 to 80% RH
Weight 200 g
Specifications are subject to change without notice (26.11.2008) 1
Dupline® is a registered trademark. A product of the CARLO GAVAZZI Group
Título: | Tipo: | |
---|---|---|
Descargar catálogo general |
Ningún comentario por el momento.
Valoración: | |
Nombre: | |
Email: | |
Título: | |
Opinión: | |
¿Recomienda la compra de este producto? | |
Añadir comentario |
Todas las valoraciones que recibimos de los artículos que ofrecemos son reales y están verificadas. Un pequeño gesto, pero de mucho valor. Por eso, te agradecemos ese minuto que inviertes en dejarnos tu opinión y calificación sobre los productos, porque nos ayuda a seguir mejorando y a ofrecerte un servicio de todavía mayor calidad.