G32822002230 CARLO GAVAZZI Ausgwählte Kriterien Modultyp Zubehör Gehäuse DIN-Schiene Stromversorgung AC I/O .. Vergrößern
Die Bilder sind nur orientativ. Bitte prüfen Sie das Artikelstammdatenblatt.

G32822002230 CARLO GAVAZZI Ausgwählte Kriterien Modultyp Zubehör Gehäuse DIN-Schiene Stromversorgung AC I/O ..

G32822002230

CARLO GAVAZZI

Ausgwählte Kriterien Modultyp Zubehör Gehäuse DIN-Schiene Stromversorgung AC I/O Typ nicht Anzahl der I/O 0 Sonstiges Modultyp Dupline Trenner Gehäuse H2 (W36) I/O Typ nicht Stromversorgung 230 VAC Haupteigenschaften Dupline Seperator zum trennen der Segmente im Kuzschlussfall

Isolator

Mehr Infos


Controls > Modulare Energiezähler und Netzanalysatoren, Software und Zubehör

* Neues Produkt in der Originalverpackung mit allen Garantien und Zertifizierungen von CARLO GAVAZZI

Gesamtpreis: $299.89
Stückpreis: $299.89

Menge Preis
1+$299.89
2+$278.77
*Dieser Preis ist pro Einheit und ist der Nettowert (ohne Steuern, falls zutreffend).

Wenn unser Preis nicht der beste ist, fragen Sie uns nach einem Angebot Fordern Sie ein Angebot

Mehr Infos



Dupline Separator
Type G 3282 2002
Du line®
Fieldbus Installationbus
• Separates primary and secondary side of Dupline®, if a short circuit is detected
• Uses 2 channels
• Channel coding by GAP 1605
• H2 Housing
• For mounting on DIN-rail in accordance with EN 50 022
Product Description Ordering Key
G 3282 2002 230
The G3282 2002 is a Dupline® bus separator, which can detect short circuits on the Dupline® bus. When a short circuit is detected, it disconnects the secondary side of the Dupline® bus.
The Dupline® bus separator is part of the smarthouse
concept. It is designed to be used in installations where one MGG is used to con- trol/monitor several apart- ments. If a short circuit appears, only the faulty part of the Dupline® bus will be disconnected from the Dupline® bus.
Type: Dupline® H2 Housing Surveillance unit
2 channels Voltage Supply
Type Selection
Supply: Ordering no.
230 V G 3282 2002 230
Output Specifications
1 output
Dupline® out Dupline®
Load 50 mA
Note: The separator works in installations with a max cabel resistance on maximum 200 Ω. This is aproximately
2000 meter with the use of 0.75 mm2 wire.
Supply Specifications
Supply 230 VAC
Power Consumption Typ. 2.5 W
General Specifications
General Specifications (cont.)
Housing H2-housing
Output settling time /
total delay < 2 sec.
Indication
Dupline® on short
(secondary side) Red Supply ON LED Green Dupline® carrier LED
(primary side) Yellow
Relay data
Contact maximum switching
current 3A
Contact resistance < 100 mΩ (measuring conditions 10 mA/20mV)
Max. Switching voltage 250 VAC
Contact material Silver, nickel, gold-covered
Addressing GAP1605
Environment
Degree of protection IP 20
Pollution degree 3 (IEC 60664) Operating temperature 0° to +50°C
Storage temperature -20° to +85°C
Power supply 230 VAC ± 15%
Galvanic separation from
Dupline® Bus
Power consumption 2.2 VA Dupline® Dupline® Dimensions 36 x 77 x 70
Humidity (non-condensing) 20 to 80% RH
Weight 200 g
Specifications are subject to change without notice (26.11.2008) 1
Dupline® is a registered trademark. A product of the CARLO GAVAZZI Group

Bewertungen (0)

Es gibt keine Produktbewertungenvor.

Bewertung abgeben
Formular verstecken
Wertung:
Name:
E-Mail :
Betreff:
Text:
  Captcha
  Bewertung abgeben

Alle Bewertungen wir von den Einzelteilen erhalten wir anbieten, sind real und verifiziert. Eine kleine Geste, aber sehr wertvoll. Also danke für die Minute, die Sie in, dass Sie uns Ihre Meinung und Bewertung von Produkten ausgeben, weil es mir hilft, weiter zu verbessern und noch mehr Servicequalität zu bieten.