Logic component for bus system

ABL/S 2.1

2CDG110073R0011

-

ABL/S2.1 Application Unit Logic

FUNC LOGIC UNIT. LOGIC

Allows the devlopment of complex logical functions by simply combining different logic elements and gates using a graphical user interface as an ETS plug-in from ETS3. No additional software is required. There are 50 logical elements (AND, OR, 1ofN), 50 uni- and bidirectional gates, 30 timer modules (On- /Off delay, impuls duration, and stairway light controller), 10 comparators, 200 worksheets, 250 Marker and 254 In- and Outputs are available. No additional power supply required, the device is powered from KNX bus.

BDB/S 1.1

2CDG110067R0011

-

BDB/S 1.1 Data Logging Unit

DATA EVALUATION MODULE

It detects local operation cycles and operating hours to plan the maintenance or durability evaluation of the devices. For each of the 35 channels to be monitored, limit values can be set and a message sent if this limit is exceeded. The logging of operating hours can be predetermined for the total or remaining time. These values can be modified via communication objects. No additional power supply required, the device is powered from KNX bus.

LM/S 1.1

GHQ6310080R0111

-

LM/S1.1 Logic Module

UNIT FOR LOGICAL FUNCTIONS

Used to solve a varied range of project-specific control tasks and can implement 3 functions simultaneously. The following functions are available for selection: logic gate, filter, time delay, multiplier, min/max value detector, temperature comparator, toggle values, threshold detection, format converter, scenes, increment/decrement values, staircase lighting.

SCM/S 1.1

2CDG110024R0011

-

SCM/S1.1 Security Module

SAFETY MODULE DIN 2 MODU

Provides logic functions to built up a security system in small and medium-sized KNX installations in combination with other KNX devices, e.g. zone terminals, motion detectors. Up to 64 different zones. Internal relay can be used for alarming.

SMB/S 1.1

GHQ6310085R0111

-

SMB/S1.1 Fault Monitoring Unit

FAULT MONITOR MODULE

It is used to detect and manage up to 100 fault messages which are processed within the unit and can be forwarded to a display unit. Furthermore, an optical and an acoustic collective status signal is provided. Messages can be acknowledged and data losses can bereported. The devices support message formats to DIN 19 235: messages with continuous lighting, new value messages with simple flashing light, initial value messages with simple acknowledgement, motor messages. Current values can be centrally scanned.

ABA/S 1.2.1

2CDG110192R0011

-

Logic controller, MDRC

Logic Controller, MDRC

Provides extensive logic functions. The logic editor is integrated into the ETS. Up to 3000 logic gates are possible. Simulation for testing. User-defined function blocks can be created and saved. Requires 24 V DC auxiliary voltage or PoE alternatively.