EV-T1G2C-1AC40A-25FT12ASBK11U 1102140 PHOENIX CONTACT Cabo para carregamento AC, AC cabo de carregamento com.. Ver maior
As imagens são só a título ilustrativo. Por favor, consulte a ficha técnica.

EV-T1G2C-1AC40A-25FT12ASBK11U 1102140 PHOENIX CONTACT Cabo para carregamento AC, AC cabo de carregamento com..

EV-T1G2C-1AC40A-25FT12ASBK11U

1102140

PHOENIX_CONTACT

Cabo para carregamento AC, AC cabo de carregamento com o veículo conector, abra extremidade do cabo, sem tampa de proteção, C-Linha black / preto, Tipo 1, SAE J1772, IEC 62196-2, 40 A / 250 V (AC), o projeto linha C Linha de cabo: 25 pés, preto, hétero, NOTA: o Cabo de gestão podem ser necessários., acasalamento rosto: preto, área de alça: preto

CHARX connect, cabo de carregamento CA com conector de carregamento do veículo e extremidade do cabo aberta, sem tampa, cor da caixa preto-preto, para carregamento de corrente alternada (CA) de veículos elétricos (EV) com entradas de veículo tipo 1, para instalação em estações de carregamento para eletromobilidade (EVSE), Tipo 1, SAE J1772, IEC 62196-2, 40 A / 250 V (AC), C-Line, logotipo "PHOENIX CONTACT", cabo: 25 pés, preto, reto, IMPORTANTE: Os cabos podem precisar ser organizados.

AC charging cable, AC charging cable with vehicle connector, open cable end, without protective cap, C-Line black / black, Type 1, SAE J1772, IEC 62196-2, 40 A / 250 V (AC), design line C-Line, cable: 25 ft, black, straight, NOTE: Cable management may be required., mating face: black, handle area: black

Mais detalhes


Dispositivos de encaixe industriais e especiais > Cabo de carregamento E-Mobility

Mobilidade Eletrônica

Produto novo em sua embalagem original com todas as garantias e certificações de PHOENIX_CONTACT

* Este artigo pode estar obsoleto. Se você estiver interessado, insira seu e-mail e informaremos se há unidades disponíveis. Caso não existam mais, um dos nossos técnicos procurará uma alternativa fornecivel com características semelhantes.

Se o nosso preço não é o melhor, peça-nos uma cotação Solicitar uma cotação

Best sellers

Mais informação



Dados comerciais

Chave de encomenda1102140
Quantidade de embalagem1
GTIN (EAN)4055626962108
Número do imposto alfandegário85444290

Desenhos



Connection diagram

Connection diagram
Pin assignment of the Vehicle Connector

Dimensional drawing

Dimensional drawing
Ensure that the vehicle connector is placed in an appropriate resting position that ensures a minimum protection rating of IP24 in accordance with IEC 61851-1 for the entire time between charging. Use the dimensions of the vehicle connector to create this type of resting position. Detailed specifications can also be found in the download area.



Schematic diagram

Schematic diagram
Operating instructions

Schematic diagram

Schematic diagram
Terminology definition



Voltar para cima

Note

Trade restrictionThe products are offered exclusively for export outside the EU and the European Economic Area.
Voltar para cima

Product definition

Product typeAC charging cable with vehicle connector, open cable end, without protective cap
TypeC-Line black / black
Standards/regulationsSAE J1772
IEC 62196-2
Charging standardType 1
Charging modeLevel 2
NoteNOTE: Cable management may be required.
Cable management is required in certain regions if the cable length exceeds 5.0 m (Switzerland) or 7.5 m (USA) (IEC 61851-1).
Voltar para cima

Dimensions

Vehicle connector width58.00 mm
Vehicle connector height151.10 mm
Vehicle connector depth236.10 mm
Conductor length25 ft
Stripping length60 mm ±15 mm
Voltar para cima

Ambient conditions

Ambient temperature (operation)-30 °C ... 50 °C
Ambient temperature (storage/transport)-40 °C ... 80 °C
Max. altitude5000 m (above sea level)
Degree of protection3R (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
Voltar para cima

Electrical properties

Maximum charging power10 kW
Number of phases1
Number of power contacts3 (L1, N, PE)
Rated current of power contacts40 A
Rated voltage for power contacts250 V AC
Number of signal contacts2 (CP, CS)
Rated current for signal contacts2 A
Rated voltage for signal contacts30 V AC
Type of signal transmissionPulse width modulation
Note on the connection methodCrimp connection, cannot be disconnected
Resistor coding480 Ω (Lever actuated)
150 Ω (Lever not actuated)
Voltar para cima

Mechanical properties

Insertion/withdrawal cycles> 10000
Insertion force< 75 N
Withdrawal force< 75 N
Voltar para cima

Design

Design lineC-Line
Housing colorblack
Mating face colorblack
Color handle areablack
Actuating element colorsilver
Color protective capblack
Customer variationsOn request
Voltar para cima

Material

Housing materialPlastic
Material handle areaSoft plastic
Actuating lever materialMetal
Material protective capSoft plastic
Material mating facePlastic
Flammability ratingV0
Material surface of contactsAg
Voltar para cima

Cable

Cable structure4 x 12 AWG 1 x 10 AWG + 5 x 22 AWG
Wiring standards/regulationsUL 62
External cable diameter14.5 mm
Type of conductorstraight
Outer sheath, materialTPE
External sheath, colorblack
Minimum bending radius72.5 mm
Voltar para cima

Locking

Locking typeNo locking option for U-lock
Voltar para cima

Environmental Product Compliance

REACh SVHCLead 7439-92-1
China RoHSEnvironmentally Friendly Use Period = 10;
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Voltar para cima

Classificações

eCl@ss

eCl@ss 9.027144705
Voltar para cima

ETIM

ETIM 6.0EC002897
ETIM 7.0EC002897
Voltar para cima

Datasheet - PDF

Avaliações: (0)

Não há comentários do produto ainda.

Adicionar avaliação
ocultar formulário
Avaliação:
Nome:
Email:
Título:
Opinión:
  Captcha
  Adicionar avaliação

Todas as classificações que recebemos a partir dos itens que oferecemos são reais e verificadas. Um pequeno gesto, mas muito valioso. Então, obrigado por esse minuto você gasta em deixar-nos a sua opinião e classificação de produtos, porque nos ajuda a continuar a melhorar e oferecer maior qualidade de serviço.