Carrinho
0
Produto
Produtos
(vazio)
Sem produtos
$0.00
Total
Produto adicionado com sucesso ao seu carrinho de compras
Quantidade
Total
Existem 0 produtos no seu carrinho de compras.
Existe um produto no seu carrinho de compras.
Total produtos
Total
Ver maior
QUINT-BUFFER/24DC/20 2866213 PHOENIX CONTACT Módulo de bateria de energia
QUINT-BUFFER/24DC/20
2866213
PHOENIX_CONTACT
Módulo de bateria de energia
Módulo tampão de 24 V DC/20 A, armazenamento de energia livre de manutenção baseado em capacitor. Entrada e saída desacopladas. Na área de download há, entre outras coisas, uma tabela de seleção claramente organizada com correntes de carga e tempos de buffer, bem como tempos de carregamento de acordo com o tempo de buffer.
Buffer module, 24 V DC/20 A, maintenance-free capacitor-based energy storage. Decoupled input and output. In the download area, there is a clearly arranged selection table available with load currents and buffer times, as well as charging times after buffer mode.
Material de instalação de redes de telecomunicações DNT / FNT > Acessórios para o SAI (Sistema de Alimentação Ininterrupta)
Fontes de alimentação
Produto novo em sua embalagem original com todas as garantias e certificações de PHOENIX_CONTACT
Related products
▲Best sellers
▲Mais informação
▲Dados técnicos
Input data
| Input voltage | 24 V DC |
| Input voltage range | 22.5 V DC ... 30 V DC |
| Input voltage range DC | 22.5 V DC ... 30 V DC |
| Buffer period | 0.2 s (20 A) |
| 4 s (1 A) | |
| Current consumption | approx. 0.1 A |
| 0.6 A (charging process) | |
| 20.6 A (max.) | |
| Reverse polarity protection | yes |
| Charging delay | no |
| Fixed backup threshold | < 22 V DC |
| Variable connect threshold | (UIN- 1 V)/0.1 s |
| Protective circuit | Transient surge protection; Suppressor diode, 35 V DC |
Output data
| Efficiency | > 95 % |
| Nominal output voltage | 24 V DC (depending on the input voltage) |
| Setting range of the output voltage (USet) | 22 V DC ... 28.5 V DC |
| Nominal output current (IN) | 20 A |
| Output current limit | 27 A (buffer mode) |
| Bridging time | 200 ms |
| Feedback voltage resistance | < 35 V DC (buffer mode) |
| Protection against overvoltage at the output (OVP) | < 35 V DC |
| Residual ripple | < 100 mVPP(buffer mode) |
| Output power | 480 W |
| Peak switching voltages nominal load | < 100 mVPP(20 MHz) |
| Power dissipation | 2.5 W (ready at 27 A) |
| 9.8 W (buffer mode at 27 A) | |
| Protective circuit | Transient surge protection; Suppressor diode, 35 V DC |
| Connection in parallel | yes, for increasing the buffer time and for redundancy |
| Connection in series | yes |
| Mains operation | |
| Nominal output voltage | 24 V DC |
| Nominal output current (IN) | 20 A |
| Battery operation | |
| Nominal output voltage | 24 V DC |
| Nominal output current (IN) | 20 A |
| Signal: Active (high = buffer module is loaded) | |
| Output description | Power Good |
| Maximum switching voltage | ≤ 24 V |
| Output voltage | + 24 V |
| Continuous load current | ≤ 20 mA |
Energy storage
| Charging current | 500 mA |
| Nominal capacity | 0.1 Ah |
| Charging time | < 27 s |
| Memory medium | internal, capacity |
| IQ technology | no |
Connection data
| Input | |
| Connection method | Screw connection |
| Conductor cross section, rigid min. | 0.5 mm² |
| Conductor cross section, rigid max. | 16 mm² |
| Conductor cross section flexible min. | 0.5 mm² |
| Conductor cross section flexible max. | 10 mm² |
| Conductor cross section AWG min. | 20 |
| Conductor cross section AWG max. | 6 |
| Stripping length | 10 mm |
| Screw thread | M4 |
| Tightening torque, min | 1.2 Nm |
| Tightening torque max | 1.5 Nm |
| Output | |
| Connection method | Screw connection |
| Conductor cross section, rigid min. | 0.5 mm² |
| Conductor cross section, rigid max. | 16 mm² |
| Conductor cross section flexible min. | 0.5 mm² |
| Conductor cross section flexible max. | 10 mm² |
| Conductor cross section AWG min. | 20 |
| Conductor cross section AWG max. | 6 |
| Stripping length | 10 mm |
| Screw thread | M4 |
| Tightening torque, min | 1.2 Nm |
| Tightening torque max | 1.5 Nm |
| Signal | |
| Conductor cross section, rigid min. | 0.2 mm² |
| Conductor cross section, rigid max. | 2.5 mm² |
| Conductor cross section flexible min. | 0.2 mm² |
| Conductor cross section flexible max. | 2.5 mm² |
| Conductor cross section AWG min. | 24 |
| Conductor cross section AWG max. | 12 |
| Screw thread | M3 |
| Tightening torque, min | 0.5 Nm |
| Tightening torque max | 0.6 Nm |
Signaling
| Types of signaling | LED |
| Active switching output | |
| Operating voltage display | Green LED |
| Signal output: Active (high = buffer module is loaded) | |
| Status display | LED "Power Good", green |
| Note on status display | Buffer module is loaded: LED ON |
Electrical properties
| Insulation voltage input/output | 1 kV (routine test) |
| 1 kV (type test) |
Product properties
| Product type | Buffer module |
| IQ technology | no |
| MTBF (IEC 61709, SN 29500) | > 500000 h |
| Data management status | |
| Article revision | 05 |
| Insulation characteristics | |
| Protection class | III |
| Degree of pollution | 2 |
Dimensions
| Width | 64 mm |
| Height | 130 mm |
| Depth | 125 mm |
| Installation dimensions | |
| Installation distance right/left | 5 mm / 5 mm |
| Installation distance top/bottom | 50 mm / 50 mm |
| Alternative assembly | |
| Width | 122 mm |
| Height | 130 mm |
| Depth | 67 mm |
Mounting
| Mounting type | DIN rail mounting |
| Assembly note | alignable: horizontally 0 mm, vertically 50 mm |
| Mounting position | horizontal DIN rail NS 35, EN 60715 |
Material specifications
| Housing material | Metal |
| Type of housing | AluNox (AlMg1) |
Environmental and real-life conditions
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -25 °C ... 70 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Maximum altitude | ≤ 2000 m |
| Climatic class | 3K3 (in acc. with EN 60721) |
| Max. permissible relative humidity (operation) | ≤ 95 % (at 25 °C, non-condensing) |
| Shock | 18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
| Vibration (operation) | < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) |
| 15 Hz ... 150 Hz, 2.3g, 90 min. | |
Standards and regulations
| Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations | EN 50178/VDE 0160 (PELV) |
| Standard - Electrical safety | EN 60950-1/VDE 0805 (SELV) |
| Standard – Safety extra-low voltage | EN 60950-1 (SELV) and EN 60204 (PELV) |
| Standard - Safe isolation | DIN VDE 0106-101 |
| Standard - Safety of transformers | EN 61558-2-17 |
Approvals
| Shipbuilding approval | DNV GL (EMC A), ABS |
| UL approvals | UL/C-UL listed UL 508 |
| UL/C-UL Recognized UL 60950-1 | |
| UL/C-UL Listed UL 1604 Class I, Division 2, Groups A, B, C, D |
EMC data
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Low Voltage Directive | Conformance with Low Voltage Directive 2014/35/EC |
| Noise immunity | EN 61000-6-2:2005 |
| Noise emission | EN 55011 (EN 55022) |
| Electrostatic discharge | |
| Standards/regulations | EN 61000-4-2 |
| Housing | Level 4 |
| Electrostatic discharge | |
| Contact discharge | 8 kV |
| Discharge in air | 15 kV |
| Comments | Criterion B |
| Electromagnetic HF field | |
| Standards/regulations | EN 61000-4-3 |
| Electromagnetic HF field | |
| Frequency range | 80 MHz ... 1 GHz |
| Test field strength | 10 V/m |
| Comments | Criterion A |
| Fast transients (burst) | |
| Standards/regulations | EN 61000-4-4 |
| Fast transients (burst) | |
| Input | 2 kV (level 3 - asymmetrical: conductor to ground) |
| Output | 2 kV (level 3 - asymmetrical: conductor to ground) |
| Signal | 1 kV (level 2 - asymmetrical: conductor to ground) |
| Comments | Criterion B |
| Surge voltage load (surge) | |
| Standards/regulations | EN 61000-4-5 |
| Surge voltage load (surge) | |
| Input/Output | 0.5 kV (level 1 - asymmetrical: conductor to ground) |
| Input/Output/Signal | 0.5 kV (level 1 - symmetrical: conductor to conductor) |
| Conducted interference | |
| Standards/regulations | EN 61000-4-6 |
| Conducted interference | |
| I/O/S | Level 3 |
| Frequency range | 0.15 MHz ... 80 MHz |
| Comments | Criterion A |
| Voltage | 10 V |
| Voltage dips | |
| Standards/regulations | EN 61000-4-11 |
| Emitted interference | |
| Standards/regulations | EN 61000-6-3 |
| Radio interference voltage in acc. with EN 55011 | EN 55011 (EN 55022) Class B, area of application: Industry and residential |
| Emitted radio interference in acc. with EN 55011 | EN 55011 (EN 55022) Class B, area of application: Industry and residential |
| Característica | Valor |
|---|---|
| Tipo de acessório/peça de reposição (EF000215) | Outro |
| Acessório (EF013236) | Sim |
| Peça de substituição (EF013237) | Não |
| Largura (EF000008) | 64 mm |
| Altura (EF000040) | 130.05 mm |
| Profundidade (EF000049) | 131.75 mm |
Datasheet - PDF
▲| Título: | Tamanho: | Tipo: |
|---|---|---|
| PDF CATALOG PHOENIX PROTECTION EN .pdf | 27 Mbytes |
|
| PHOENIX CONTACT-2866213-QUINT-BUFFER/24DC/20 | 137 Kbytes |
|
Avaliações: (0) ▲
Não há comentários do produto ainda.
Adicionar avaliação
ocultar formulário
| Avaliação: |
|
| Nome: | |
| Email: | |
| Título: | |
| Opinión: | |
| Você recomendaria esse produto para comprar? | |
|
|
|
| Adicionar avaliação | |
Todas as classificações que recebemos a partir dos itens que oferecemos são reais e verificadas. Um pequeno gesto, mas muito valioso. Então, obrigado por esse minuto você gasta em deixar-nos a sua opinião e classificação de produtos, porque nos ajuda a continuar a melhorar e oferecer maior qualidade de serviço.