Prodotto aggiunto al tuo carrello
G89101127
CARLO GAVAZZI
1
Parametri selezionati MODULO TIPO Sensore / rilevatore CUSTODIA Decentrato ALIMENTAZIONE Alimentato dal bus I/O TIPO PIR NUMERO DI I/O 1 Altro MODULO TIPO PIR rilevatore di movimento CUSTODIA 104x55x57 I/O TIPO PIR ALIMENTAZIONE Alimentato dal bus CARATTERISTICHE PRINCIPALI Sensore agli infrarossi per rilevare il movimento di persone PIR alimentato dal bus campo 90° 10m
Home > CARLO GAVAZZI
* Prodotto nuovo nel suo imballaggio d'origine con tutte le garanzie e certificazioni de CARLO GAVAZZI
Grazie per il suo interesse nei nostri prodotti, speriamo che il tempo di consegna indicato sia conveniente per lei.
Durante l’elaborazione dell’ordine potrà selezionare il tipo di invio che meglio si adatti alle sue necessità: Aéreo Express 24Hrs, Terrestre Standard 48/72Hrs, etc.
PIR Sensor
Type G 8910 1127
Du line®
Fieldbus Installationbus
• Passive infrared detector (PIR)
• Detects movement by e.g. a person
• Indoor applications
• Dupline® output
• Operating distance: 10 m
• Built-in transmission time: 12 s to 10 min
• Operating angle: 90°
• Walk test: LED indication
• Switch for NO/NC, transmitting channel output
• Channel coding by GAP 1605
• Supplied by Dupline®
Product Description Ordering Key
G 8910 1127
Non-powered Dupline® pas- sive infrared detector with built-in transmitter. For de- tection of movement by e.g.
a person. Used for burglar alarm, light control etc. Built- in timer for delay on operate and transmission time.
Type: Dupline®
Type
Type Selection
Supply Ordering no.
1 channel
PIR detector
By Dupline® G 8910 1127
Supply Specifications
Power supply Supplied by Dupline®
Rated operational current < 2.6 mA with walktest on
< 1.9 mA with walktest off
Input Specifications
Inputs PIR on I/O 1
Lens Dual detecting zones
Segments 24
Levels 3
Angle 90° Operating distance ≤ 10 m
(see radiation diagram) Wave length 7 to 14 µm
Input detection speed 0.5 to 5 pulses/s
Transmission delay
Switch 4 Delay on/off Delay on release 12 s to 10 min *) Switch 2 OFF 12 s to 2 min Switch 2 ON 1 to 10 min
Default channel status
Switch 3 OFF NO Switch 3 ON NC
Output
LED output red LED on I/O 5
Tamper signal on I/O 2
*) The transmission time starts when the respective channel changes its status. The channel returns to its default status when the time has elapsed. Each detection by the PIR will retrigger the timer.
General Specifications
Power ON delay Typ. 1 min. It is therefore advisable to keep the unit connected to Dupline®
Walk test indication LED, red Switch 1 ON Walk test ON Switch 1 OFF Walk test OFF
Delay time adjustment Potentiometer (Transm. timer) controls the range selected by switch 2
Environment
Degree of protection IP 40
For indoor applications
Operating temperature -10° to +50°C (+14° to +122°F) Storage temperature -30° to +70°C (-22° to +158°F)
Connection Screw terminals Terminal D+. Dupline signal Terminal D- Dupline signal
Material
Housing Colour White
Lens Polyethylene
Dimensions (WxHxD) 104 x 55 x 57 mm
Weight Approx. 150 g
Specifications are subject to change without notice (01.12.2006) 1
Dupline® is a registered trademark. A product of the CARLO GAVAZZI Group
Titolo: | Dimensione: | Tipo: |
---|---|---|
PDF CATALOG CARLO GAVAZZI EN.pdf | 13 Mbytes | |
G89101127 G89101127 G89101127_DATENBLATT_DE.pdf | 107 Kbytes | |
Scarica il catalogo generale |
Nessun commento per il momento.
Valutazione: | |
Nome: | |
Email: | |
Titolo: | |
Testo: | |
Mi consiglia questo prodotto da acquistare? | |
Inserisci recensione |
Tutti i feedback che riceviamo dagli elementi che offriamo sono reali e verificati. Un piccolo gesto, ma di grande valore. Quindi grazie per quel minuto si spende in noi lasciare il vostro parere e punteggio sui prodotti, perché ci aiuta a continuare a migliorare e di offrire ancora maggiore qualità del servizio.