ANUNCIAR
6AG1138-6DB00-2BB1 SIEMENS SIPLUS ET 200SP TM Pulse 2x24V -40...+60 °C with conformal coating based on 6ES71.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

6AG1138-6DB00-2BB1 SIEMENS SIPLUS ET 200SP TM Pulse 2x24V -40...+60 °C with conformal coating based on 6ES71..

6AG1138-6DB00-2BB1

SIEMENS

SIPLUS ET 200SP TM Pulse 2x24V -40...+60 °C with conformal coating based on 6ES7138-6DB00-0BB1 . TM Pulse 2x24V PWM and pulse output 2 channels 2 A for proportional valves and DC motors

SIPLUS ET 200SP -40 ... +60 ° C temp. boot: -25 ° C with coating formed based on 6ES7138-6DB00-0BB1 . TM PRESS 2X24V, PWM output and pulse, 2-channel 2 A. For valves and DC motors

More details


AUTOMATION SYSTEMS > SIPLUS Extreme (LOGO, S7-1200, S7-1500, etc)

Brand new product in its original packaging covered by the warranties and certifications provided by SIEMENS

Total: $990.42
Unit price: $990.42
This price is per unit and is the net value (not including taxes if applicable).

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

More info



ETIM: EC001601 - Fieldbus, decentr. periphery - function-/technology module

Value Unit
Suitable for multi-axis positioning (EF003267) -
Explosion safety category for gas (EF003997) -
Suitable for SSI (EF003254) -
Degree of protection (NEMA) (EF011959) -
Supply voltage DC (EF007534) -V
Frequency measurement (EF000599) -
Number of HW-interfaces RS-422 (EF003022) -
Single-axis positioning possible (EF003268) -
Fieldbus connection over separate bus coupler possible (EF004002) -
Suitable for electronic positioning (EF003255) -
Single-axis controller possible (EF003266) -
Rail mounting possible (EF003972) -
Front build in possible (EF007016) -
Rack-assembly possible (EF007018) -
Suitable for flying saw (EF003264) -
Suitable for counting (EF003248) -
Suitable for incremental data detection (EF003258) -
Wall mounting/direct mounting (EF007020) -
Number of HW-interfaces RS-485 (EF003023) -
Suitable for detection absolute value (EF003259) -
Supply voltage AC 50 Hz (EF007532) ['-', '-']V
Supply voltage AC 60 Hz (EF007533) ['-', '-']V
Voltage type of supply voltage (EF002991) DC
Number of functions (EF003244) -
Number of HW-interfaces industrial Ethernet (EF003020) 0
Number of interfaces PROFINET (EF006932) 0
Number of HW-interfaces RS-232 (EF003021) 0
Number of HW-interfaces serial TTY (EF003024) 0
Number of HW-interfaces parallel (EF003026) 0
Number of HW-interfaces Wireless (EF006933) 0
Number of HW-interfaces USB (EF003025) 0
Number of HW-interfaces other (EF003027) 0
With optical interface (EF003028) false
Supporting protocol for TCP/IP (EF003050) false
Supporting protocol for PROFIBUS (EF003052) false
Supporting protocol for CAN (EF003053) false
Supporting protocol for INTERBUS (EF003054) false
Supporting protocol for ASI (EF003051) false
Supporting protocol for KNX (EF003055) false
Supporting protocol for Modbus (EF003057) false
Supporting protocol for Data-Highway (EF003058) false
Supporting protocol for DeviceNet (EF003059) false
Supporting protocol for SUCONET (EF003060) false
Supporting protocol for LON (EF003017) false
Supporting protocol for PROFINET IO (EF007525) false
Supporting protocol for PROFINET CBA (EF007524) false
Supporting protocol for SERCOS (EF006657) false
Supporting protocol for Foundation Fieldbus (EF007522) false
Supporting protocol for EtherNet/IP (EF007521) false
Supporting protocol for AS-Interface Safety at Work (EF007519) false
Supporting protocol for DeviceNet Safety (EF007520) false
Supporting protocol for INTERBUS-Safety (EF006662) false
Supporting protocol for PROFIsafe (EF007526) false
Supporting protocol for SafetyBUS p (EF007527) false
Supporting protocol for other bus systems (EF003062) false
Radio standard Bluetooth (EF007178) false
Radio standard WLAN 802.11 (EF007179) false
Radio standard GPRS (EF008523) false
Radio standard GSM (EF008524) false
Radio standard UMTS (EF008525) false
IO link master (EF007298) false
System accessory (EF004118) true
Suitable for weighing (EF003249) false
Suitable for temperature control (EF008344) false
Suitable for welding control (EF003251) false
Suitable for pressure control (EF003252) false
Suitable for NC (EF003253) false
Suitable for CNC (EF003256) false
Suitable for flux controller (EF003260) false
Suitable for flux measurement (EF003261) false
Suitable for path controller (EF003262) false
Suitable for cam controller (EF003263) false
Suitable for multi-axis control (EF003265) false
Function block restart blockage (EF007212) false
Function block automatic reset (EF007208) false
Contactor control function block (EF007467) false
Function block emergency stop (EF007211) false
Function block contactless working protection installation (EF007209) false
Function block affirm pushbutton (EF007214) false
Function block 2-hand switching (EF007215) false
Function block operating mode selection (EF007210) false
Function block access control (EF007213) false
Degree of protection (IP) (EF005474) IP20
Suitable for safety functions (EF001597) false
Category according to EN 954-1 (EF006782) -
SIL according to IEC 61508 (EF009889) -
Performance level according to EN ISO 13849-1 (EF007399) -
Appendant operation agent (Ex ia) (EF004141) false
Appendant operation agent (Ex ib) (EF004142) false
Explosion safety category for dust (EF003998) None
Width (EF000008) 20.0mm
Height (EF000040) -mm
Depth (EF000049) -mm


SIPLUS ET 200SP TM Pulse 2x24V -40...+60 °C with conformal coating based on 6ES7138-6DB00-0BB1 . TM Pulse 2x24V PWM and pulse output 2 channels 2 A for proportional valves and DC motors
General information
Product type designationTM Pulse 2x24 V
Firmware versionV1.0
● FW update possibleYes
usable BaseUnitsBU type B1
Color code for module-specific color identification plateCC40
Product function
● I&M dataYes; I&M 0
● Isochronous modeYes
Engineering with
● PROFIBUS from GSD version/GSD revisionGSD Revision 5
● PROFINET from GSD version/GSD revisionGSDML V2.31
Supply voltage
Load voltage L+
● Rated value (DC)24 V
● permissible range, lower limit (DC)19.2 V
● permissible range, upper limit (DC)28.8 V
● Short-circuit protectionYes
● Reverse polarity protectionYes; against destruction
Input current
Current consumption, max.70 mA; without load
Encoder supply
Number of outputs2; A common 24V encoder supply for both channels
24 V encoder supply
● 24 VYes; L+ (-0.8 V)
● Short-circuit protectionYes; per module, electronic
● Output current, max.300 mA
Power loss
Power loss, typ.1.7 W
Address area
Address space per module
● Inputs16 byte; 8 per channel
● Outputs24 byte; 12 per channel
Digital inputs
Number of digital inputs2; 1 per channel
Digital inputs, parameterizableYes
Input characteristic curve in accordance with IEC 61131, type 3Yes
Digital input functions, parameterizable
● Freely usable digital inputYes
● HW enable for digital outputYes
Input voltage
● Type of input voltageDC
● Rated value (DC)24 V
● for signal "0"-30 to +5 V
● for signal "1"+11 to +30V
● permissible voltage at input, min.-30 V
● permissible voltage at input, max.30 V
Input current
● for signal "1", typ.2.5 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizableYes; none / 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms
— at "0" to "1", min.4 µs; for parameterization "none"
— at "1" to "0", min.4 µs; for parameterization "none"
Digital outputs
Type of digital outputP- and M-switching
Number of digital outputs2; 1 per channel
Current-sinkingYes
Current-sourcingYes
Digital outputs, parameterizableYes
Short-circuit protectionYes; electronic/thermal
● Response threshold, typ.6.8 A with Standard output, 2 A with High Speed output
Limitation of inductive shutdown voltage to-0.8 V
Controlling a digital inputYes
Accuracy of pulse duration±100 ppm ±0.5 µs with High Speed output, ±100 ppm ±9 µs with Standard output
minimum pulse duration1.5 µs; With High Speed output, 10 µs with Standard output
Digital output functions, parameterizable
● Freely usable digital outputYes
● PWM outputYes
— Number, max.2; 1 per channel
— Cycle duration, parameterizableYes; Max. 85 s
— ON period, min.0 %
— ON period, max.100 %
— Resolution of the duty cycle0.0036 %; For S7 analog format, min. 20 ns
● Connection of a proportional valveYes
● DitheringYes
— Frequency adjustableYes
— Amplitude adjustableYes
● Current measurementYes
● Current controlYes
● Connection of a DC motorYes
● ON-delayYes
● OFF-delayYes
● Frequency outputYes
● Pulse trainYes
● Pulse outputYes
Switching capacity of the outputs
● with resistive load, max.2 A
● on lamp load, max.10 W; 1 W with High Speed output
Load resistance range
● lower limit12 Ω; 240 ohm with High Speed output
● upper limit12 kΩ
Output voltage
● Type of output voltageDC
● for signal "0", max.1 V
● for signal "1", min.23.2 V; L+ (-0.8 V)
Output current
● for signal "1" rated value2 A; 0.1 A with High Speed output, observe derating
Output delay with resistive load
● "0" to "1", typ.0 µs; With High Speed output, 4.5 µs with Standard output
● "0" to "1", max.0.8 µs; With High Speed output, 9 µs with Standard output
● "1" to "0", typ.0 µs; With High Speed output, 4.5 µs with Standard output
● "1" to "0", max.0.8 µs; With High Speed output, 9 µs with Standard output
Parallel switching of two outputs
● for upratingYes
Switching frequency
● with resistive load, max.100 kHz; With High Speed output, 10 kHz with standard output
● with inductive load, max.100 kHz; With High Speed output, 10 kHz with standard output
● on lamp load, max.10 Hz
Total current of the outputs
● Current per channel, max.2 A
● Current per group, max.4 A
● Current per module, max.4 A
Isochronous mode
Bus cycle time (TDP), min.250 µs; with 1 channel configuration, 375 µs with 2 channel configuration
Jitter, max.1 µs; typically ±
Interrupts/diagnostics/status information
Diagnostics functionYes
Substitute values connectableYes; Parameterizable
Alarms
● Diagnostic alarmYes
Diagnoses
● Monitoring the supply voltageYes
● Short-circuitYes
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED)Yes; green PWR LED
● Channel status displayYes
● for module diagnosticsYes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channelsNo
● between the channels and backplane busYes
Permissible potential difference
between different circuits75 V DC/60 V AC (base isolation)
Isolation
Isolation tested with707 V DC (type test)
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.-40 °C; = Tmin (incl. condensation/frost)
● horizontal installation, max.60 °C; Observe derating
● vertical installation, min.-40 °C; = Tmin (incl. condensation/frost)
● vertical installation, max.50 °C; Observe derating
Altitude during operation relating to sea level
● Installation altitude above sea level, max.5 000 m
● Ambient air temperature-barometric pressure-altitudeTmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)
Relative humidity
● With condensation, tested in accordance with IEC 60068-2-38, max.100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation
Resistance
Coolants and lubricants
— Resistant to commercially available coolants and lubricantsYes; Incl. diesel and oil droplets in the air
Use in stationary industrial systems
— to biologically active substances according to EN 60721-3-3Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
— to chemically active substances according to EN 60721-3-3Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
— to mechanically active substances according to EN 60721-3-3Yes; Class 3S4 incl. sand, dust, *
— Against mechanical environmental conditions acc. to EN 60721-3-3Yes; Class 3M8 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0)
Use on ships/at sea
— to biologically active substances according to EN 60721-3-6Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on request
— to chemically active substances according to EN 60721-3-6Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
— to mechanically active substances according to EN 60721-3-6Yes; Class 6S3 incl. sand, dust; *
— Against mechanical environmental conditions acc. to EN 60721-3-6Yes; Class 6M4 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0)
Usage in industrial process technology
— Against chemically active substances acc. to EN 60654-4Yes; Class 3 (excluding trichlorethylene)
— Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)
Remark
— Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04* The supplied plug covers must remain in place over the unused interfaces during operation!
Conformal coating
● Coatings for printed circuit board assemblies acc. to EN 61086Yes; Class 2 for high reliability
● Protection against fouling acc. to EN 60664-3Yes; Type 1 protection
● Military testing according to MIL-I-46058C, Amendment 7Yes; Discoloration of coating possible during service life
● Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830AYes; Conformal coating, Class A
Decentralized operation
to SIMATIC S7-300Yes
to SIMATIC S7-400Yes
to SIMATIC S7-1200Yes
to SIMATIC S7-1500Yes
to standard PROFIBUS masterYes
to standard PROFINET controllerYes
Dimensions
Width20 mm
Weights
Weight, approx.50 g
last modified:08/29/2020


Product
Article Number (Market Facing Number)6AG1138-6DB00-2BB1
Product DescriptionSIPLUS ET 200SP TM Pulse 2x24V -40...+60 °C with conformal coating based on 6ES7138-6DB00-0BB1 . TM Pulse 2x24V PWM and pulse output 2 channels 2 A for proportional valves and DC motors
Product familySIPLUS TM Pulse 2x24V pulse output module
Product Lifecycle (PLM)PM300:Active Product
Price data
Price Group473
Surcharge for Raw MaterialsNone
Metal FactorNone
Delivery information
Export Control RegulationsAL : N / ECCN : EAR99H
Standard lead time ex-works42 Day/Days
Net Weight (kg)0,053 Kg
Product Dimensions (W x L x H)Not available
Packaging Dimension6,40 x 7,80 x 2,30
Package size unit of measureCM
Quantity Unit1 Piece
Packaging Quantity1
Additional Product Information
EAN4047618068936
UPC804766353383
Commodity Code85389091
LKZ_FDB/ CatalogIDA&DSE/SIP ADD
Product Group4257
Group CodeR740
Country of originGermany
Compliance with the substance restrictions according to RoHS directiveSince: 08.09.2015
Product classB: return restricted, please contact your Siemens partner/contact
WEEE (2012/19/EU) Take-Back ObligationYes
REACH Art. 33 Duty to inform according to the current list of candidates

Information obligation imposed by Article 33, REACH Regulation: This product includes one or several articles in which the following substance of the candidate list is contained in concentrations higher than 0,1% weight by weight (w/w):

4,4'-isopropylidenediphenol (Bisphenol A, BPA)

Based on the information currently available, we assume that these substances do not pose any risk if the articles are used as intended (including disposal). Please also refer to product documentation.

Information obligation imposed by Article 33, REACH Regulation: This product includes one or several articles in which the following substance of the candidate list is contained in concentrations higher than 0,1% weight by weight (w/w):

Lead

Based on the information currently available, we assume that these substances do not pose any risk if the articles are used as intended (including disposal). Please also refer to product documentation.

Classifications
VersionClassification
eClass627-24-26-05
eClass7.127-24-26-05
eClass827-24-26-05
eClass927-24-26-05
eClass9.127-24-26-05
ETIM5EC001601
ETIM6EC001601
ETIM7EC001601
IDEA43567
UNSPSC1532-15-17-05

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.