> SIEMENS>AUTOMATION SYSTEMS>SIPLUS Extreme (LOGO, S7-1200, S7-1500, etc)>6AG1131-6TF00-7CA0 SIEMENS SIPLUS ET 200SP -40...+70°C start up temperature: -25°C with conformal coating ba..
Previous Product Next Product
6AG1131-6TF00-7CA0 SIEMENS SIPLUS ET 200SP -40...+70°C start up temperature: -25°C with conformal coating ba.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

6AG1131-6TF00-7CA0 SIEMENS SIPLUS ET 200SP -40...+70°C start up temperature: -25°C with conformal coating ba..

6AG1131-6TF00-7CA0

SIEMENS

SIPLUS ET 200SP -40...+70°C start up temperature: -25°C with conformal coating based on 6ES7131-6TF00-0CA0 . digital input module, DI 8x NAMUR High Feature, suitable for BU type A0, Color code CC01, channel diagnostics

SIPLUS ET 200SP -40...+70 ° C temp. boot: -25 ° C with coating formed based on 6ES7131-6TF00-0CA0 . Module inputs ddigitales, DI 8X NAMUR HIGH FEATURE. Suitable for type BU A0, color code CC01, channel diagnosis

More details


AUTOMATION SYSTEMS > SIPLUS Extreme (LOGO, S7-1200, S7-1500, etc)

* Brand new product in its original packaging covered by the warranties and certifications provided by SIEMENS

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

▲

More info

▲


ETIM: EC001599 - Fieldbus, decentr. periphery - digital I/O module

Value Unit
SIL according to IEC 61508 (EF009889) -
Type of electric connection (EF003961) -
Supply voltage AC 60 Hz (EF007533) -V
Explosion safety category for dust (EF003998) -
Explosion safety category for gas (EF003997) -
Category according to EN 954-1 (EF006782) -
Performance level according to EN ISO 13849-1 (EF007399) -
Supply voltage AC 50 Hz (EF007532) -V
Supply voltage DC (EF007534) ['19.2', '28.8']V
Voltage type of supply voltage (EF002991) DC
Number of digital inputs (EF001992) 8
Number of digital outputs (EF001993) 0
Digital inputs configurable (EF008516) true
Digital outputs configurable (EF008520) -
Type of voltage (input voltage) (EF003033) DC
Type of digital output (EF003601) None
Output current (EF003202) -A
Permitted voltage at output (EF007553) ['-', '-']V
Type of output voltage (EF008222) -
Short-circuit protection, outputs available (EF003203) -
Number of HW-interfaces industrial Ethernet (EF003020) 0
Number of interfaces PROFINET (EF006932) 0
Number of HW-interfaces RS-232 (EF003021) 0
Number of HW-interfaces RS-422 (EF003022) 0
Number of HW-interfaces RS-485 (EF003023) 0
Number of HW-interfaces serial TTY (EF003024) 0
Number of HW-interfaces parallel (EF003026) 0
Number of HW-interfaces Wireless (EF006933) 0
Number of HW-interfaces USB (EF003025) 0
Number of HW-interfaces other (EF003027) 0
With optical interface (EF003028) false
Supporting protocol for TCP/IP (EF003050) false
Supporting protocol for PROFIBUS (EF003052) false
Supporting protocol for CAN (EF003053) false
Supporting protocol for INTERBUS (EF003054) false
Supporting protocol for ASI (EF003051) false
Supporting protocol for KNX (EF003055) false
Supporting protocol for Modbus (EF003057) false
Supporting protocol for Data-Highway (EF003058) false
Supporting protocol for DeviceNet (EF003059) false
Supporting protocol for SUCONET (EF003060) false
Supporting protocol for LON (EF003017) false
Supporting protocol for PROFINET IO (EF007525) false
Supporting protocol for PROFINET CBA (EF007524) false
Supporting protocol for SERCOS (EF006657) false
Supporting protocol for Foundation Fieldbus (EF007522) false
Supporting protocol for EtherNet/IP (EF007521) false
Supporting protocol for AS-Interface Safety at Work (EF007519) false
Supporting protocol for DeviceNet Safety (EF007520) false
Supporting protocol for INTERBUS-Safety (EF006662) false
Supporting protocol for PROFIsafe (EF007526) false
Supporting protocol for SafetyBUS p (EF007527) false
Supporting protocol for other bus systems (EF003062) false
Radio standard Bluetooth (EF007178) false
Radio standard WLAN 802.11 (EF007179) false
Radio standard GPRS (EF008523) false
Radio standard GSM (EF008524) false
Radio standard UMTS (EF008525) false
IO link master (EF007298) false
System accessory (EF004118) true
Degree of protection (IP) (EF005474) IP20
Fieldbus connection over separate bus coupler possible (EF004002) true
Rail mounting possible (EF003972) true
Wall mounting/direct mounting (EF007020) false
Front build in possible (EF007016) true
Rack-assembly possible (EF007018) true
Suitable for safety functions (EF001597) false
Appendant operation agent (Ex ia) (EF004141) -
Appendant operation agent (Ex ib) (EF004142) -
Width (EF000008) 15.0mm
Height (EF000040) 73.0mm
Depth (EF000049) 58.0mm
Time delay at signal exchange (EF002382) -ms
Permitted voltage at input (EF007554) -V
Input current at signal 1 (EF001428) -mA


SIPLUS ET 200SP -40...+70°C start up temperature: -25°C with conformal coating based on 6ES7131-6TF00-0CA0 . digital input module, DI 8x NAMUR High Feature, suitable for BU type A0, Color code CC01, channel diagnostics
General information
Product type designationDI 8xNAMUR HF
Firmware version
● FW update possibleYes
usable BaseUnitsBU type A0
Color code for module-specific color identification plateCC01
Product function
● I&M dataYes; I&M0 to I&M3
● Isochronous modeNo
Operating mode
● DIYes
● CounterNo
● OversamplingNo
● MSINo
Supply voltage
Rated value (DC)24 V
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
Reverse polarity protectionYes
Encoder supply
Number of outputs8
Short-circuit protectionYes
24 V encoder supply
● 24 VNo
● Short-circuit protectionNo
Power loss
Power loss, typ.1.5 W
Address area
Address space per module
● Address space per module, max.1 byte; + 1 byte for QI information
Digital inputs
Number of digital inputs8; NAMUR
Digital inputs, parameterizableYes
Pulse extensionYes; 0.5 s, 1 s, 2 s
Edge evaluationYes; rising edge, falling edge, edge change
Signal change flutterYes; 2 to 32 signal changes
Flutter observation windowYes; 0.5 s, 1 s to 100 s in 1-s steps
Input voltage
● Rated value (DC)8.2 V
Input current
for 10 k switched contact
— for signal "0"0.35 to 1.2 mA
— for signal "1"2.1 to 7 mA
for unswitched contact
— for signal "0", max. (permissible quiescent current)0.5 mA
— for signal "1"typ. 8 mA
for NAMUR encoders
— for signal "0"0.35 to 1.2 mA
— for signal "1"2.1 to 7 mA
Input delay (for rated value of input voltage)
● tolerated changeover time for changeover contacts300 ms
for standard inputs
— parameterizableNo
for NAMUR inputs
— at "0" to "1", max.12 ms
— at "1" to "0", max.12 ms
Cable length
● shielded, max.200 m
Encoder
Connectable encoders
● NAMUR encoder/changeover contact according to EN 60947Yes
● Single contact / changeover contact unconnectedYes
● Single contact / changeover contact connected with 10 kΩYes
Interrupts/diagnostics/status information
Diagnostics functionYes
Alarms
● Diagnostic alarmYes; channel by channel
● Hardware interruptYes; Parameterizable, channels 0 to 7
Diagnoses
● Diagnostic information readableYes
● Monitoring the supply voltageYes
— parameterizableYes
● Monitoring of encoder power supplyYes; channel by channel
● Wire-breakYes; channel by channel
● Short-circuitYes; channel by channel
● Group errorYes
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED)Yes; green PWR LED
● Channel status displayYes; green LED
● for channel diagnosticsYes; red LED
● for module diagnosticsYes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channelsNo
● between the channels and backplane busYes
● between the channels and the power supply of the electronicsYes
Isolation
Isolation tested with707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functionsNo
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.-40 °C; = Tmin (incl. condensation/frost); start-up @ -25 °C
● horizontal installation, max.70 °C; = Tmax; > +60 °C number of simultaneously controllable inputs max. 4 (no adjacent points)
Altitude during operation relating to sea level
● Installation altitude above sea level, max.5 000 m
● Ambient air temperature-barometric pressure-altitudeTmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)
Relative humidity
● With condensation, tested in accordance with IEC 60068-2-38, max.100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation
Resistance
Coolants and lubricants
— Resistant to commercially available coolants and lubricantsYes; Incl. diesel and oil droplets in the air
Use in stationary industrial systems
— to biologically active substances according to EN 60721-3-3Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
— to chemically active substances according to EN 60721-3-3Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
— to mechanically active substances according to EN 60721-3-3Yes; Class 3S4 incl. sand, dust, *
— Against mechanical environmental conditions acc. to EN 60721-3-3Yes; Class 3M8 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0)
Use on ships/at sea
— to biologically active substances according to EN 60721-3-6Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on request
— to chemically active substances according to EN 60721-3-6Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
— to mechanically active substances according to EN 60721-3-6Yes; Class 6S3 incl. sand, dust; *
— Against mechanical environmental conditions acc. to EN 60721-3-6Yes; Class 6M4 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0)
Usage in industrial process technology
— Against chemically active substances acc. to EN 60654-4Yes; Class 3 (excluding trichlorethylene)
— Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)
Remark
— Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04* The supplied plug covers must remain in place over the unused interfaces during operation!
Conformal coating
● Coatings for printed circuit board assemblies acc. to EN 61086Yes; Class 2 for high reliability
● Protection against fouling acc. to EN 60664-3Yes; Type 1 protection
● Military testing according to MIL-I-46058C, Amendment 7Yes; Discoloration of coating possible during service life
● Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830AYes; Conformal coating, Class A
Dimensions
Width15 mm
Height73 mm
Depth58 mm
Weights
Weight, approx.32 g
last modified:08/29/2020


Product
Article Number (Market Facing Number)6AG1131-6TF00-7CA0
Product DescriptionSIPLUS ET 200SP -40...+70°C start up temperature: -25°C with conformal coating based on 6ES7131-6TF00-0CA0 . digital input module, DI 8x NAMUR High Feature, suitable for BU type A0, Color code CC01, channel diagnostics
Product familySIPLUS digital inputs
Product Lifecycle (PLM)PM300:Active Product
Price data
Price Group473
Surcharge for Raw MaterialsNone
Metal FactorNone
Delivery information
Export Control RegulationsAL : N / ECCN : N
Standard lead time ex-works37 Day/Days
Net Weight (kg)0,040 Kg
Product Dimensions (W x L x H)Not available
Packaging Dimension6,50 x 7,70 x 2,30
Package size unit of measureCM
Quantity Unit1 Piece
Packaging Quantity1
Additional Product Information
EAN4047618068714
UPC804766832710
Commodity Code85389091
LKZ_FDB/ CatalogIDA&DSE/SIP ADD
Product Group4257
Group CodeR740
Country of originGermany
Compliance with the substance restrictions according to RoHS directiveSince: 25.02.2014
Product classB: return restricted, please contact your Siemens partner/contact
WEEE (2012/19/EU) Take-Back ObligationYes
REACH Art. 33 Duty to inform according to the current list of candidates

Information obligation imposed by Article 33, REACH Regulation: This product includes one or several articles in which the following substance of the candidate list is contained in concentrations higher than 0,1% weight by weight (w/w):

4,4'-isopropylidenediphenol (Bisphenol A, BPA)

Based on the information currently available, we assume that these substances do not pose any risk if the articles are used as intended (including disposal). Please also refer to product documentation.

Information obligation imposed by Article 33, REACH Regulation: This product includes one or several articles in which the following substance of the candidate list is contained in concentrations higher than 0,1% weight by weight (w/w):

Lead

Based on the information currently available, we assume that these substances do not pose any risk if the articles are used as intended (including disposal). Please also refer to product documentation.

Classifications
VersionClassification
eClass627-24-26-04
eClass7.127-24-26-04
eClass827-24-26-04
eClass927-24-26-04
eClass9.127-24-26-04
ETIM5EC001599
ETIM6EC001599
ETIM7EC001599
IDEA43566
UNSPSC1532-15-17-05

Datasheet - PDF

▲
Title: Size: Type:
PDF CATALOGUE SIEMENS EN.pdf 120 Mbytes
6AG1131-6TF00-7CA0 EN_6AG1131-6TF00-7CA0.pdf 130 Kbytes 6AG1131-6TF00-7CA0 EN_6AG1131-6TF00-7CA0.pdf

Reviews (0) ▲

No customer reviews for the moment.

Add Review
Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
Do you recommend this product to buy?
  Captcha
  Add review

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.