No products
Product successfully added to your shopping cart
View larger
SB-8EP6A8A9L34S 1314975 PHOENIX CONTACT M40, Mating connector, series: SB, long straight, shielded: yes, for..
SB-8EP6A8A9L34S
1314975
PHOENIX_CONTACT
Product on demand only, returns will not be accepted.
M40, Mating connector, series: SB, long straight, shielded: yes, for standard lock and SPEEDCON, No. of poles: 6+4+4+PE, 6-pole data element, contact connection type: Male, Crimp connection, cable diameter range: 20.5 mm ... 26.5mm, coding: Coding 1, this item is expected to be lead-free from the third quarter of 2025 in accordance with RoHS II without exception 6c (Pb <0.1%), a lead-free alternative is pre-available upon request
M40, Coupling plug-in connector, SB, long straight, shielded: yes, for standard and SPEEDCON locking, No. of poles: 6+4+4+PE, 6-pole data element, Direction of rotation: Standard, contact type: Male, cable diameter range: 20.5 mm ... 26.5 mm, encoding:Encoding 1
M40, Extender connector, serial: SB, straight, long, shielded: yes, For standard and SPEEDCON locking, Number of poles: 6-pole data element, 6+4+4+ground, Direction of rotation: standard, contact type: Male, cable diameter range: 20.5 mm ... 26.5 mm, keying: Keying 1
Connectors > Circular connector for field assembly (industrial connector)
Field Device Connectors (FDC)
Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Related products
▲Best sellers
▲More info
▲| General | Crimp contacts to be ordered separately |
| Safety instructions | |
| Safety instructions | WARNING: Connectors should not be disconnected or connected under load. Failure to comply with and use may result in property damage and/or personal injury. |
| • WARNING: Only put into service products that are in perfect working order. Regularly check the products for damage. Immediately remove defective products. Replace damaged products. Any repair is impossible. | |
| • WARNING: The installation and use of the product is strictly reserved for qualified professional electricians taking into account the following safety instructions. Qualified personnel must be familiar with the basic principles of electrical engineering. He must be able to recognize and avoid hazards. The corresponding symbol on the packaging indicates that qualified electrical engineering personnel are required for installation and operation. | |
| • The products are intended for use in the construction of electrical appliances, installations and PLCs. | |
| • When using connectors outdoors, they must be particularly protected from environmental influences. | |
| • It is forbidden to handle or open products that have been improperly made. | |
| • Use only struts with the specifications of the standards indicated in the technical specifications (e.g., those indicated in the product accessories on the web at phoenixcontact.com/products). | |
| • In the case of direct use of the product in connection with foreign trademarks, the responsibility lies with the user. | |
| • For operating voltages > 50 VAC, the conductive connector housings must be grounded | |
| • For the combination of several electrical circuits in a cable and/or connector, the following standards apply: VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 | |
| • Consider the corresponding technical specifications. Directions can be found at the following locations: o About the product o On the packaging label o In the documentation provided o On the web at the address phoenixcontact.com/products in the product | |
| • Use only the tools recommended by Phoenix Contact | |
| • The installation instructions/Design In documents available on the web at phoenixcontact.com/products in the download area in the product must be followed. | |
| • Protect non-plugged connectors with a protective cover. The appropriate accessories are available in the accessories area of the article on the web at phoenixcontact.com/produits in the product | |
| • Use the connector only when it is fully plugged in and locked. | |
| • When installing the conductor, ensure that the tensile load exerted on the connectors does not exceed the set normative limits. | |
| • Respect the minimum bend radius of the cable. Install the conductor without twisting. | |
| • In normal operation mode, the connector heats up. Depending on the ambient conditions, the surface of the connector may continue to heat up. In this case, it is the responsibility of the user to affix the warning signs (e.g. DIN EN ISO 13732-1:2008-12). | |
| Product Type | Circular connector (cable side) |
| Insulating body | |
| Data Rate | 100 Mbps |
| Keying | Keying 1 |
| Contact Type | Male |
| Application | Hybrid |
| Number of poles | 15 |
| Direction of rotation | Standard |
| Plug-in | 6-pole, 6+4+4+earth data element |
| Contact DiameterPower Contacts | 3.6 mm |
| Cord SectionPower Contactsmin. | 2.5 mm² |
| Cord SectionPower Contactsmax. | 16 mm² |
| Reference currentPower Contacts | 70 A |
| Note | with an ambient temperature of 15 °C, see derating curve |
| Reference voltage | 630 V AC |
| Rated shock resistance voltage | 6 kV |
| Surge Category | III |
| Degree of pollution | 3 |
| Reference voltage (II/3) power contact | 850 V DC |
| Reference voltage (III/3) power contact | 630 V AC |
| Contact DiameterSignaling Contacts | 1 mm |
| Cord SectionSignaling Contactsmin. | 0.06 mm² |
| Cord SectionSignaling Contactsmax. | 1.5 mm² |
| Rated current per signalling contact | 8 A |
| Note | with max. connection section |
| Reference voltage Signaling contact | 500 V |
| Rated shock resistance voltage | 6 kV |
| Reference voltage (III/3) signal contact | 500 V |
| Contact Diameter Data Contacts | 0.6 mm |
| Cord cross-section Data contacts min. | 0.08 mm² |
| Cord cross-section Max. data contacts | 0.25 mm² |
| Reference current per data contact at 25 °C | 2 A |
| Note | with max. connection section |
| Reference Voltage Data Contacts | 50 V |
| Rated shock resistance voltage | 1.5 kV |
| Installation height | 2000 m |
| Case | |
| Case material | Pces rotat. : all. copper-zinc (CuZn), press-cast parts. : zinc (GD-Zn) |
| Lock Mode | For standard and SPEEDCON locking |
| Pg gland | without |
| Ingress protection (plugged in) | IP68/IP69K |
| Thread Type | M40 |
| Seal | |
| Outer diameter of the cable | 20.5 mm ... 26.5 mm |
| Seal material | FKM |
| Feature Name | Feature Value |
|---|---|
| Number of data contacts (EF012232) | 0 |
| Number of power contacts (EF012216) | 0 |
| Ambient temperature (EF002386) | -40 °C |
| Type of locking (EF000208) | Other |
| With protective conductor (EF007468) | No |
| Screened (EF000881) | No |
| With status indication (EF001602) | No |
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOG PHOENIX CONNECTORS EN.pdf | 68 Mbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.