ANUNCIAR
VAL-MS-T1/T2 335/12.5/4+0 2800645 PHOENIX CONTACT Lightning/surge arrester type 1/2 View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

VAL-MS-T1/T2 335/12.5/4+0 2800645 PHOENIX CONTACT Lightning/surge arrester type 1/2

VAL-MS-T1/T2 335/12.5/4+0

2800645

PHOENIX_CONTACT

Lightning/surge arrester type 1/2

Universal pluggable lightning current / surge arrester equipped with varistors for three-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE).

Universal varistor-based plug-in lightning/surge arrester for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE).

More details


Earthing, lightning and surge protection > Lightning current arrester for power supply systems

Trabtech (TT)

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

Total: $692.27
Unit price: $692.27
This price is per unit and is the net value (not including taxes if applicable).

If our price is not the best, please ask us for a quote. Ask for a quotation

Related products

Best sellers

More info



Technical data

Product properties
Product typeArrester combination
Product familyVALVETRAB MS
IEC test classificationI / II
T1 / T2
EN typeT1 / T2
IEC power supply systemTN-S
TypeDIN rail module, two-section, divisible
Number of positions4
Surge protection fault messageoptical
Data management status
Article revision09
Insulation characteristics
Overvoltage categoryIII
Pollution degree2

Electrical properties
Nominal frequency fN50 Hz (60 Hz)

Connection data
Connection methodScrew connection
Screw threadM5
Tightening torque3 Nm (1.5 mm² ... 16 mm²)
4.5 Nm (25 mm² ... 35 mm²)
Stripping length16 mm
Conductor cross section flexible1.5 mm² ... 25 mm²
Conductor cross section rigid1.5 mm² ... 35 mm²
Conductor cross section AWG15 ... 2
Connection methodFork-type cable lug
Conductor cross section flexible1.5 mm² ... 16 mm²

Dimensions
Dimensional drawingsbxbdgmvrq.jpg
Width71.2 mm
Height89.8 mm
Depth77.5 mm (incl. DIN rail 7.5 mm)
Horizontal pitch4 Div.

Material specifications
Colorblack (RAL 9005)
Flammability rating according to UL 94V-0
CTI value of material600
Insulating materialPA 6.6/PBT
Material groupI
Housing materialPA 6.6
PBT

Mechanical properties
Mechanical data
Open side panelNo

Protective circuit
Mode of protectionL-PE
N-PE
Direction of action3L-N/PE
Nominal voltage UN240/415 V AC (TN-S)
Nominal frequency fN50 Hz (60 Hz)
Maximum continuous voltage UC335 V AC
Rated load current IL80 A
Residual current IPE≤ 3.2 mA
Standby power consumption PC≤ 1080 mVA
Nominal discharge current In(8/20) µs12.5 kA
Maximum discharge current Imax(8/20) µs50 kA
Impulse discharge current (10/350) µs, charge6.5 As
Impulse discharge current (10/350) µs, specific energy39 kJ/Ω
Impulse discharge current (10/350) µs, peak value limp12.5 kA
Total discharge current Itotal(8/20) µs200 kA
Total discharge current Itotal(10/350) µs50 kA
Short-circuit current rating ISCCR25 kA
Voltage protection level Up≤ 1.2 kV
≤ 1.6 kV (30 kA - 8/20 µs)
Residual voltage Ures≤ 1.2 kV (at In)
≤ 1.1 kV (at 10 kA)
≤ 1 kV (at 5 kA)
≤ 0.9 kV (at 3 kA)
TOV behavior at UT415 V AC (5 s / withstand mode)
457 V AC (120 min / safe failure mode)
Response time tA≤ 25 ns
Max. backup fuse with V-type through wiring80 A (gG - 16 mm²)
Max. backup fuse with branch wiring160 A (gG)
Additional technical data
Maximum discharge current Imax(8/20) µs65 kA

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP20 (only when all terminal points are used)
Ambient temperature (operation)-40 °C ... 80 °C
Ambient temperature (storage/transport)-40 °C ... 80 °C
Altitude≤ 2000 m (amsl)
Permissible humidity (operation)5 % ... 95 %
Shock (operation)30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)7.5g (10 ... 500 Hz / 2.5 h / X, Y, Z)

Approvals
UL specifications
Maximum continuous operating voltage MCOV (L-L)670 V AC
Maximum continuous operating voltage MCOV (L-N)670 V AC
Maximum continuous operating voltage MCOV (L-G)335 V AC
Maximum continuous operating voltage MCOV (N-G)335 V AC
Nominal discharge current In(L-L)20 kA
Nominal discharge current In(L-N)20 kA
Nominal discharge current In(L-G)20 kA
Nominal discharge current In(N-G)20 kA
Mode of protectionL-L
L-N
L-G
N-G
Nominal voltage415/240 V AC
Power distribution systemWye
Nominal frequency50/60 Hz
Measured limiting voltage MLV (L-L)3650 V
Measured limiting voltage MLV (L-N)3650 V
Measured limiting voltage MLV (L-G)2630 V
Measured limiting voltage MLV (N-G)2630 V
SPD Type4CA
UL connection data
Tightening torque30 lbf-in.
Conductor cross section AWG14 ... 2

Standards and regulations
Standards/specificationsIEC 61643-11
Note2011
Standards/specificationsEN 61643-11
Note2012

Mounting
Mounting typeDIN rail: 35 mm

ETIM for 2800645 Earthing, lightning and surge protection (EC000381)
Feature Name Feature Value
System configuration DC (EF009926) No
System configuration IT (EF009927) No
System configuration TN (EF009928) No
System configuration TN-C (EF009929) No
System configuration TN-C-S (EF009933) No
System configuration TN-S (EF009930) Yes
System configuration TT (EF009931) No
System configuration other (EF009932) No
Lightning impulse current (10/350 µs) (EF000421) 12.5 kA
Max. continuous voltage AC (EF004198) 335 V
Mounting method (EF000003) DIN rail (top hat rail) 35 mm
Construction size (EF002566) Other
Max. conductor cross section solid (solid, stranded) (EF008827) 35 mm²
Max. conductor cross section flexible (fine-strand) (EF008828) 25 mm²
With remote signalling contact (EF000422) No
Exhausting (EF004181) No
Signalling at the device (EF004241) Optic
Category type 1 (EF004229) Yes
Integrated backup fuse (EF008797) Yes
Suitable for outdoor use (EF003532) No
Degree of protection (IP) (EF005474) IP20

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.