Product successfully added to your shopping cart
MACX MCR-EX-AP-2SD-25-35-LP-SP
1291186
PHOENIX_CONTACT
1
Ex i, Valve Control Block for Activating Ex i Magnetic Valves, Alarm Transmitters or Intrinsically Safe Indicators Installed in the Ex Zone. 2 channels, Loop-powered, 4-way separation, Safety Integrity Level (SIL, IEC61508): 3, Push-in connection
Ex i-Solenoid driver for intrinsically safe activation of Ex i solenoid valves, alarm transmitters, or displays installed in potentially explosive areas. Standard configuration, Loop-powered, 4-way isolation, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
Home > PHOENIX CONTACT
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
General | Installation conditions influence the ambient temperature. Please refer to the “Control cabinet installation instructions”. |
Product type | Solenoid driver |
Product family | MACX Analog |
No. of channels | 2 |
No. of channels | 2 |
Electrical isolation | 4-way isolation |
Reverse polarity protection | yes |
Electrical isolation Input/output IEC/EN 60079-11 | |
Standards/regulations | IEC/EN 60079-11 |
Rated insulation voltage | 375 VPP |
Electrical isolation Output 1/output 2 | |
Test voltage | 500 V (50 Hz, 60 s) |
Electrical isolation Input 1 / input 2 | |
Test voltage | 350 V (50 Hz, 60 s) |
Supply | |
Supply voltage range | loop-powered, no external supply necessary |
Power consumption | 0.5 W (+ (lAx 37 mW/mA)) |
Signal: Digital | |
Switching level "0" signal | 0 V ... 5 V |
Switching level "1" signal | 18 V ... 31.2 V |
Switching: Digital | |
Output description | intrinsically safe |
Typical response time | ≤ 18 ms |
Typical turn-off time | ≤ 50 ms |
Switching frequency | ≤ 10 Hz |
Cross section AWG | (converted acc. to IEC) |
Connection method | Push-in connection |
Stripping length | 8 mm |
Conductor cross section rigid | 0.2 mm² ... 1.5 mm² |
Conductor cross section flexible | 0.2 mm² ... 1.5 mm² |
Conductor cross section AWG | 24 ... 16 |
Ex installation (EPL) | Gc |
Ex i circuits (EPL) | Ga |
Da | |
Ma | |
Safety data: Highest values per output | |
Max. internal inductance Li | negligible |
Max. internal capacitance Ci | 1.1 nF |
Max. output voltage Uo | 27.6 V |
Max. output current Io | 110 mA (Ex ia) |
50 mA (Ex ib) | |
Max. output power Po | 760 mW |
Safety-related maximum voltage Um | 253 V AC |
IIA (simple circuit): Max. external inductivity Lo/ Max. external capacitance Co | 100 mH / 2.22 µF |
IIB (simple circuit): Max. external inductivity Lo/ Max. external capacitance Co | 9 mH / 667 nF |
IIC (simple circuit): Max. external inductivity Lo/ Max. external capacitance Co | 1.2 mH / 85 nF |
I (simple circuit): Max. external inductivity Lo/ Max. external capacitance Co | 100 mH / 3.5 µF |
Safety data: Highest values with two outputs connected in parallel | |
Max. internal inductance Li | negligible |
Max. internal capacitance Ci | 2.2 nF |
Max. output voltage Uo | 27.6 V |
Max. output current Io | 220 mA (Ex ia) |
100 mA (Ex ib) | |
Max. output power Po | 1520 mW |
Safety-related maximum voltage Um | 253 V AC |
IIA (simple circuit): Max. external inductivity Lo/ Max. external capacitance Co | 25 mH / 2.22 µF |
IIB/IIIC (simple circuit): Max. external inductivity Lo/ Max. external capacitance Co | 1.8 mH / 665 nF |
I (simple circuit): Max. external inductivity Lo/ Max. external capacitance Co | 40 mH / 3.5 µF |
Status display | Yellow LED/per channel |
Dimensional drawing | |
Width | 17.5 mm |
Height | 107.8 mm |
Depth | 113.7 mm |
Depth NS 35/7,5 | 114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715) |
Flammability rating according to UL 94 | V0 |
Housing material | Polyamide (PA 6.6) |
Ambient conditions | |
Degree of protection | IP20 (Terminal blocks) |
IP30 (Housing) | |
Ambient temperature (operation) | -20 °C ... 70 °C (Stand-alone device: any mounting position) |
-20 °C ... 50 °C (Group assembly: vertical DIN rail without circulating air) | |
-20 °C ... 60 °C (Group assembly: vertical DIN rail with circulating air) | |
-20 °C ... 60 °C (Group assembly: horizontal DIN rail without circulating air) | |
-20 °C ... 65 °C (Group assembly: horizontal DIN rail with circulating air) | |
Ambient temperature (storage/transport) | -40 °C ... 80 °C |
Altitude | ≤ 2000 m |
Permissible humidity (operation) | ≤ 95 % (non-condensing) |
ATEX | |
Identification | II (1) G [Ex ia Ga] IIC |
II (1) D [Ex ia Da] IIIC | |
II 3 (1) G Ex nA [ia Ga] IIC T4 Gc | |
I (M1) [Ex ia Ma] I | |
IECEx | |
Identification | [Ex ia Ga] IIC |
[Ex ia Da] IIIC | |
Ex nA [ia Ga] IIC T4 Gc | |
[Ex ia Ma] I | |
Safety Integrity Level (SIL, IEC 61508) | |
Identification | 3 |
Electromagnetic compatibility | Tested in accordance with the following standards and regulations: EN 61326-1 For industrial use, NAMUR NE 21 |
Electrical isolation | 4-way isolation |
Mounting type | NS 35/15, NS 35/7,5 |
Mounting position | vertical, horizontal |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.