Product successfully added to your shopping cart
EV-T2M3SE24-3AC32A-0,7M6,0E14
1627987
PHOENIX_CONTACT
1
Socket Outlet
CHARX connect, Infrastructure charging box, front cover screw connection, Optimized plug-in and unplug forces, For charging electric vehicles (EV) with alternating current (AC), Compatible with charging connectors for infrastructures, Type 2, IEC 62196-2, 32 A / 480 V (AC), Single conductors, length: 0.7 m, Locking actuator: 24 V, 4-pole, Rear wall mount, Generation 1 Easy Mount, "PHOENIX CONTACT" logo
CHARX connect, Infrastructure charging socket, optimized insertion and withdrawal forces, for charging electric vehicles (EV) with alternating current (AC), Type 2, IEC 62196-2, 32 A / 480 V (AC), Single wires, length: 0.7 m, locking actuator: 24 V, 4-pos., Rear panel mounting, housing: black, PHOENIX CONTACT logo
Industrial socket/plug applications > Charging connector E-Mobility
E-Mobility
Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
| Product type | Infrastructure charging socket |
| Product family | CHARX connect |
| Application | for charging electric vehicles (EV) with alternating current (AC) |
| compatible with infrastructure charging plugs | |
| Design | optimized insertion and withdrawal forces |
| Affixed logo | PHOENIX CONTACT logo |
| Charging standard | Type 2 |
| Charging mode | Mode 3, Case B |
| Type of signal transmission | Pulse width modulation |
| Note on the connection method | Crimp connection, cannot be disconnected |
| Type of charging current | AC 3-phase |
| Charging power | 26.6 kW |
| Charging current | 32 A |
| Power contact | |
| Number | 5 (L1, L2, L3, N, PE) |
| Rated voltage | 480 V AC |
| Rated current | 32 A |
| Signal contact | |
| Number | 2 (CP, PP) |
| Rated voltage | 30 V AC |
| Rated current | 2 A |
| Locking actuator | |
| Operating voltage | 24 V |
| Note number of positions | 4-pos. |
| Position of the locking actuator | top center |
| Locking actuator | |
| Operating voltage | 24 V |
| Note number of positions | 4-pos. |
| Position of the locking actuator | top center |
| Possible power supply range at the motor | 22 V ... 26 V |
| Maximum voltage for locking detection | 30 V |
| Typical motor current for locking | 0.05 A |
| Reverse current of the motor | max. 0.5 A |
| Max. dwell time with reverse current | 1 s |
| Recommended adaptation time | 600 ms |
| Pause time after entry or exit path | 3 s |
| Service life insertion cycles | > 10000 load cycles |
| Lock recognition | available |
| Mechanical emergency release | available |
| Ambient temperature (operation) | -30 °C ... 50 °C |
| Cable length | 0.5 m |
| Cable structure | 4 x 0.5 mm² |
| Bending radius | min. 15 mm |
| External cable diameter | 1.60 mm ±0.02 mm |
| Cable weight | 7.00 kg/km |
| Cable resistance | ≤ 37.1 Ω/m |
| Single wire, color | BU/RD, BU/GN, BU/YE, BU/BN |
| Color (Housing) | black (9005) |
| Material (Housing) | Plastic |
| Material (Contact surface) | Silver |
| Cable length | 0.7 m (AC cables) |
| 0.5 m (Locking actuator cables) | |
| Cable type | Single wires |
| Cable structure | 5x 6.0 mm² + 2x 0.5 mm² |
| Mechanical data | |
| Insertion/withdrawal cycles | > 10000 |
| Insertion force | < 100 N (Optimized) |
| Withdrawal force | < 100 N (Optimized) |
| Ambient conditions | |
| Ambient temperature (operation) | -30 °C ... 50 °C |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Altitude | 5000 m (above sea level) |
| Standards | |
| Standards/regulations | IEC 62196-2 |
| Mounting type Infrastructure charging socket | Rear panel mounting (0 to 90 degree frontal inclination possible) |
| Mounting type Protective cover | front (available separately) |
| Mounting hole diameter | 7.00 mm (ø) |
| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOG PHOENIX CHARGING TECHNOLOGY ELECTROMOBILITY EN.pdf | 6 Mbytes |
|
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.