Product successfully added to your shopping cart
EV-CC-AC1-M3-CBC-RCM-ETH-3G
1018702
PHOENIX_CONTACT
1
Charging controller for AC charging of electric vehicles in accordance with IEC 61851-1, including DC residual current monitoring, automatic plug release mechanism in the event of voltage failure, interface for power meter, and RFID reader. Configuration and control via Ethernet interface or mobile service interface (OCPP).
AC load control system according to IEC 61851-1, server for load distribution up to 5 clients, OCPP 1.6J via 3G modem, Modbus-TCP via Ethernet, connection to RFID reader and energy meter via RS-485, DC leakage current monitoring, male connector unlocking in case of power failure
Industrial socket/plug applications > Charging controller E-Mobility
E-Mobility
Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
| Orderkey | 1018702 |
|---|---|
| Packing unit | 1 |
| Catalog page | Page 60 (C-7-2019) |
| GTIN | 4055626503974 |
| Custom tariff number | 85371098 |
| Product type | AC charging controller for private and commercial applications (EU/CN) |
|---|---|
| Standards/regulations | IEC 61851-1 |
| Charging mode | Mode 3, Case B + C |
| Number of supported charging points | 1 |
| Locking release in the event of mains failure | Integrated release function of the locking actuator for disconnection of Infrastructure Plug and Infrastructure Socket Outlet |
| Conformance | CE-compliant |
| Supply voltage | 230 V |
|---|---|
| Supply voltage range | 100 V AC ... 240 V AC (nominal voltage range) |
| Nominal power consumption | < 3 W (No-load) |
| Power consumption | < 10 W (maximum) |
| Frequency range | 50 Hz ... 60 Hz |
| Rated frequency fn | ≤ 2000 Hz |
|---|---|
| Nominal differential current | ± 300 mA |
| Residual current IΔn | 30 mA (AC) |
| 6 mA (DC) | |
| Tripping time for IΔn | < 180 ms |
| Rated current In | 32 A (Three-phase, 4x6 mm²) |
| 48 A (Single-phase) | |
| Response time for 2 x IΔn | < 70 ms |
| Tripping time for 5xIΔn | < 20 ms |
| Control of charging contactor | Relay output C1.2 |
|---|---|
| Minimum switching capacity | 4000 VA |
| Maximum switching voltage | 250 V AC (External supply) |
| Max. switching current | 16 A |
| Control of locking actuator | Motor switching output |
| Maximum switching voltage | 12 V (Internal supply) |
| Max. switching current | 1 A (maximum) |
| Number of digital inputs | 5 |
|---|---|
| Description of the input | Digital input |
| Nominal current IN | ≤ 4 mA |
| Nominal input voltage UN | 12 V |
| Input voltage range U1 | 0 V ... 3 V (Off) |
| Input voltage range U2 | 9 V ... 15 V (On) |
| Number of interfaces | 1 (for energy measurement device and RFID reader) |
|---|---|
| Bus system | RS-485 |
| Connection method | Screw connection |
| Number of supported devices | 2 |
| Transmission speed | 4.8 kbps ... 115.2 kbps (adjustable) |
| Protocols supported | Modbus/RTU (Master) |
| Number of interfaces | 1 |
|---|---|
| Connection method | RJ45 socket |
| Transmission speed | 10/100 Mbps |
| Transmission length | 100 m |
| Protocols supported | Modbus/TCP |
| Interface description | HSPA/GSM/SPRS/EDGE mobile wireless interface for communicating with higher-level management systems using the OCPP 1.6J communication protocol |
|---|---|
| Frequency | 900 MHz (HSPA) |
| 2100 MHz (HSPA) | |
| 850 MHz (GSM/GPRS/EDGE ) | |
| 900 MHz (GSM/GPRS/EDGE ) | |
| 1800 MHz (GSM/GPRS/EDGE ) | |
| 1900 MHz (GSM/GPRS/EDGE ) | |
| Impedance | 50 Ω |
| Transmission power | 2 W (GSM 850 (Class 4)) |
| 2 W (GSM 950 (Class 4)) | |
| 1 W (GSM 1800 (Class 1)) | |
| 1 W (GSM 1900 (Class 1)) | |
| + 24 old TXBdBm (UMTS/HSPA (Class 3)) | |
| Antenna connection | 1 |
| SMA (male) | |
| SIM card | Micro-SIM |
| Protocols supported | OCPP 1.6J |
| Ambient temperature (operation) | -25 °C ... 60 °C |
|---|---|
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Max. altitude | < 2000 m |
| Permissible humidity (operation) | 30 % ... 95 % (non-condensing) |
| Degree of protection | IP20 |
| Degree of pollution | 2 IEC 60664-1 |
| Connection method | Screw connection |
|---|---|
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section solid | 0.2 mm² ... 4 mm² |
| Conductor cross section AWG | 24 ... 12 |
| Connection method | Screw connection |
| Conductor cross section flexible | 0.2 mm² ... 1 mm² |
| Conductor cross section solid | 0.14 mm² ... 1.5 mm² |
| Conductor cross section AWG | 26 ... 16 |
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
|---|---|
| Noise emission | EN 61000-6-3 |
| Noise immunity | EN 61000-6-2 |
| Low Voltage Directive | Conformance with Low Voltage Directive 2014/35/EC |
| Housing | DIN 43880 |
| China RoHS | Environmentally Friendly Use Period = 50 |
|---|---|
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOG PHOENIX CHARGING TECHNOLOGY ELECTROMOBILITY EN.pdf | 6 Mbytes |
|
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.