FL SWITCH SFN 5TX-PN
AvailableShip on today
Ethernet switch, five TP RJ45 ports, automatic detection of data transmission speed of 10 or 100 Mbps (RJ45), autocrossing function. The multicast filter will block PROFINET PTCP-Delay traffic
AUTOMATION Industrial Automation - PHOENIX CONTACT
Ethernet networks. Cables and connectors - PHOENIX CONTACT
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
FL SWITCH SFN... Factoryline switches with standard functions can be used for quick and cost-effective Ethernet network expansion to the field level. The narrow housing design makes them suitable for universal remote use in control cabinets and junction boxes.
FL SWITCH SFN…-PN switches have a unique multicast filter that blocks PROFINET PTCP-Delay traffic.
- Multi-address function
The switch independently learns the addresses of termination devices connected to a port by evaluating the source addresses in the data. Only packets with unknown addresses, with a source address of this port or with a multicast/broadcast address in the destination address field are forwarded via the corresponding port. Up to 2048 MAC addresses can be stored.
- Quality of service
In cases of heavy traffic, packets with an 802.1Q priority level between 4 and 7 or with an IPv4 Type of Service Precedence value of one or more are considered high priority and are processed before packets with an 802.1Q priority level between 0 and 3 or an IPv4 Type of Service Precedence value of 0.
- Multicast filtering
The multicast filter will block PROFINET PTCP-Delay traffic by filtering frames with the destination MAC address in the range 01-80-C2-00-00-02 through 01-80-C2-00-00-0F. Note that the filter blocks LLDP traffic because PTCP-Delay uses the same MAC address (01-80-C2-00-00-0E).
Low cost, low complexity security (optional) elements are available to restrict access or tampering.
Power connection is via a removable COMBICON connector. US is +24 V DC and GND is 0 V DC. FE is via a separate screw.
|Degree of protection||IP20|
|Ambient temperature (operation)||0 °C ... 60 °C|
|Ambient temperature (storage/transport)||-20 °C ... 70 °C|
|Permissible humidity (operation)||5 % ... 95 % (non-condensing)|
|Permissible humidity (storage/transport)||5 % ... 95 % (non-condensing)|
|Air pressure (operation)||86 kPa ... 5 kPa (up to 1500 m above mean sea level)|
|Interface 1||Ethernet (RJ45)|
|No. of ports||5 (RJ45 ports)|
|Note on connection method||Auto negotiation and autocrossing|
|Transmission physics||Ethernet in RJ45 twisted pair|
|Transmission speed||10/100 MBit/s|
|Basic functions||Unmanaged switch / auto negotiation, complies with IEEE 802.3, store and forward switching mode|
|Status and diagnostic indicators||LEDs: US, link and activity per port|
|Supply voltage||24 V DC|
|Residual ripple||3.6 VPP (within the permitted voltage range)|
|Supply voltage range||9 V DC ... 32 V DC|
|Typical current consumption||typ. 90 mA (at US = 24 V DC)|
|Mounting type||DIN rail|
|Type AX||Block design|
|Net weight||265 g|
|Developed in acc. with standard||IEC 61000-6.2|
|Test standard||IEC 61000-4-2 (ESD)|
|Test result||Criterion B|
|PHOENIX CONTACT-2891151-FL SWITCH SFN 5TX-PN||English||110 Kbytes|