Product successfully added to your shopping cart
HC-M-HS-MOD-ST
1605000
PHOENIX_CONTACT
1
Contact insert module
Industrial plug-in connectors/interfaces
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Orderkey | 1605000 |
---|---|
Packing unit | 1 pc |
Note | Made to Order (non-returnable) |
Catalog page | Page 553 (C-4-2015) |
GTIN | 4017918893293 |
Weight per Piece (excluding packing) | 69.900 g |
Custom tariff number | 85366990 |
Country of origin | DE (Germany) |
Rated voltage (III/3) | 1000 V |
---|---|
Rated current | 100 A |
Rated surge voltage | 8 kV |
Connection profile | 2 |
Conductor cross section | 16 mm² ... 35 mm² (The cross section specification refers to the geometric cross section of the cable used) |
---|---|
Connection cross section AWG | 4 ... 2 |
Stripping length of the individual wire | 13 mm |
Tightening torque | 6 Nm (16 mm²) |
7 Nm (25 mm²) | |
8 Nm (35 mm²) | |
Wire diameter including insulation | 11.4 mm |
Hexagonal socket | SW 4 |
Insertion/withdrawal cycles | ≥ 500 |
Minimum housing height | 72 mm |
Note | For HEAVYCON HC-B6 to B48 housing (housing height: min. 72 mm), HC-M-MHR... hinged retaining frame required, axial connection for 4 mm Allen key |
---|---|
Series | HC-M-HS |
Number of module slots | 2 |
Connection method | Axial screw connection |
Flammability rating according to UL 94 | V0 |
Degree of pollution | 3 |
Overvoltage category | III |
Assembly instructions | - Use HC housing h >= 72 mm - Connection of wires using a 4 mm Allen wrench - Axial screw connection only for stranded wires - Plug-in connections may only be operated only when there is no load/voltage |
Connection | Note for axial connection method The specified conductor cross sections refer to the geometric cross section of the used conductor. The use of conductors with a geometric cross section that deviates greatly from the nominal cross section of the conductor should be checked first. The wiring space of the axial screw technology has been designed for fine strand conductors as per VDE 0295 class 5. Deviating conductor superstructures (e.g. class 6 conductors) must be checked before use. Connection It must be ensured before installation that the ball screw is completely turned back (chamber is open). Twisting the conductors is not allowed. The cores must be pushed up to the end of the contact chamber (until the contact is insulated). Keep the core in this position and tighten it using an Allen key. The required core end must be cut before a reconnection. Tightening the connection screw is allowed only once in order to prevent a breakage of the litz wire. |
Connection in acc. with standard | CUL |
---|---|
Flammability rating according to UL 94 | V0 |
China RoHS | Environmentally Friendly Use Period = 50 |
---|---|
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX CONNECTORS EN.pdf | 57 Mbytes | |
PHOENIX CONTACT-1605000-HC-M-HS-MOD-ST | 124 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.