ER-X064HC PANASONIC Wide-area, high speed ionizer-head, bar type, removal width 640mm, charge removal time 1.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

ER-X064HC PANASONIC Wide-area, high speed ionizer-head, bar type, removal width 640mm, charge removal time 1..

ER-X064HC

PANASONIC

Wide-area, high speed ionizer-head, bar type, removal width 640mm, charge removal time < 1sec, ion balance max. ± 30V, discharge output voltage approx. 7kV, -60 to +200°C

More details


Ionizers - PANASONIC > ER-X high speed ionizer - PANASONIC

* Brand new product in its original packaging covered by the warranties and certifications provided by PANASONIC

* This article is restricted. Please ask us for a quotation and we will check if there are units available or we will offer you an alternative product.

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

More info



Product Number ER-X064HC
Part Number ER-X064HC
Product Pulse AC Method Area Ionizer
Details Head (High and low temperature resistant type)
Product name Pulse AC Method Area Ionizer ER-X

Item Specifications
Product Number ER-X064HC
Part Number ER-X064HC
CE marking compliant directives EMC Directive, RoHS Directive
Effective charge removal width 640 mm
25.197 in
approx.
Charge removal time 1 sec. or less
(Note: Typical value in condition of discharge distance 100 mm3.937 in, center of the product, discharge frequency 30 Hz and no air supply.)
Ion balance ±30 V or less
(Note 1:Typical value in condition of discharge distance 100 mm3.937 in, center of the product, discharge frequency 30 Hz and no air supply.)
(Note 2: Ion balance refers to the average value of plus and minus. The specification value is the typical one in condition used when ambient temperature change is less than ±10 ℃, ion balance is set after 30 minutes from the discharge start, the ion balance control function is set ON.)
Discharge method Pulse AC method
Discharge frequency 30 Hz
(Note:Set the discharge frequency to 30 Hz. Do not use any other frequency.)
Discharge output voltage ±7,000 V approx.
Ozone generation 0.01 ppm or less
(Note:Typical value in condition of discharge distance 100 mm3.937 in, center of the product, discharge frequency 30 Hz and no air supply.)
Maximum air pressure 0.1 MPa
Applicable fluid Air (dried clean air)
(Note:The dried clean air is the air dried (dew point : equivalent of -20 ℃-4 ℉) and filtered (mesh-size : equivalent of 0.01 μm).)
Operating altitude 2,000 m6561.68 ftor less
(Note:Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.)
Ambient temperature Head : -60 to +200 ℃-76 to +392 ℉(No dew condensation or icing)(Note), Storage : -10 to +65 ℃+14 to +149 ℉
High voltage unit : 0 to +50 ℃+32 to +122 ℉(No dew condensation), Storage : -10 to +65 ℃+14 to +149 ℉
(Note): Discoloration of the head may occur when used under high temperatures, but it does not affect the charge removal performance.
Ambient humidity 35 to 65 % RH, Storage : 35 to 85 % RH
Vibration resistance 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each
Shock resistance 100 m/s2acceleration (10 G approx.), in X, Y and Z directions three times each
Enclosure earthing Floating
Material Main unit enclosure : PPS, Stainless steal (SUS), Head mounting bracket : Stainless steal (SUS),
Discharge needle : PC, PPS, Tungsten, Main unit enclosure of high-voltage unit : ABS
Length of high-voltage cable Heat-resistant shielded cable, 1.8 m5.906 ft
Weight Net weight : 900 g approx.
Accessories ø6ø0.236-4 Air tube joint : 1 pc., Seal cap : 1 pc., Head mounting bracket (mounted at the factory)

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.