Cart
0
Product
Products
(empty)
No products
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total
View larger
T3-4-15682/ST/SVB 025526 EATON ELECTRIC Main switch, +steel enclosure, 6p+1N/O+1N/C, Ie 25A, handle red yell..
T3-4-15682/ST/SVB
025526
EATON-MOELLER
Main switch, +steel enclosure, 6p+1N/O+1N/C, Ie=25A, handle red yellow, 0-1, 90°
General Switch; 6 poles + 1 NO + 1 NC; 32 A; 90 °; Box mounting; Red/Yellow Lever; Lockable in position 0 (OFF) stainless steel
Cam switch according to IEC/EN60947-3, size T3 in steel sheet enclosure, 690 V/32A, degree of protection Front IP65, with red rotary handle and yellow locking collar, lockable in O position with 3 padlocks. Design general: insulating material-surface mounting enclosure , flush mounting, center mounting breaker. High-performance, robust, compact T cam switches are used in industry, the trades , and building services management. A variety of standard switches is available for selection. These are supplemented by special customer-specific switches. Here the possibilities are almost unlimited. Comprehensive accessories complete the switch product range and supplement the usage alternatives. All current paths are equipped with double-break contacts.
Low-voltage industrial components > Switch disconnector
Disconnectors and Cam Switches
Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER
Best sellers
▲More info
▲Main switch, +steel enclosure, 6p+1N/O+1N/C, Ie=25A, handle red yellow, 0-1, 90°
Cam switch according to IEC/EN60947-3, size T3 in steel sheet enclosure, 690 V/32A, degree of protection Front IP65, with red rotary handle and yellow locking collar, lockable in O position with 3 padlocks. Design general: insulating material-surface mounting enclosure , flush mounting, centre mounting breaker. High-performance, robust, compact T cam switches are used in industry, the trades, and building services management. A variety of standard switches is available for selection. These are supplemented by special customer-specific switches. Here the possibilities are almost unlimited. Comprehensive accessories complete the switch product range and supplement the usage alternatives. All current paths are equipped with double-break contacts.
Delivery program
Product range
Main switch
maintenance switch
Repair switch
maintenance switch
Repair switch
Part group reference
T3
Stop Function
Emergency switching off function
With red rotary handle and yellow locking ring
Number of poles
6 pole
Auxiliary contacts
1 N/O
1 N/C
Degree of Protection
IP65
Design
surface mounting
Contact sequence
Design number
15682
Function
Motor rating AC-23A, 50 - 60 Hz [P]
400 V [P]
15 kW
Rated uninterrupted current [Iu]
32 A
Note on rated uninterrupted current !u
Rated uninterrupted current Iuis specified for max. cross-section.
Number of contact units
4 contact unit(s)
Technical data
General
Standards
according to IEC/EN 60 204-1 Part 1
IEC/EN 60947, VDE 0660, IEC/EN 60204
Switch-disconnector according to IEC/EN 60947-3
IEC/EN 60947, VDE 0660, IEC/EN 60204
Switch-disconnector according to IEC/EN 60947-3
Climatic proofing
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Damp heat, cyclic, to IEC 60068-2-30
Ambient temperatureEnclosed
-25 - +40 °C
Overvoltage category/pollution degree
III/3
Rated impulse withstand voltage [Uimp]
6000 V AC
Mechanical shock resistance
12 g
Mounting position
As required
Contacts
Mechanical variablesNumber of poles
6 pole
Mechanical variablesAuxiliary contacts
1 N/O
Mechanical variablesAuxiliary contacts
1 N/C
Electrical characteristicsRated operational voltage [Ue]
690 V AC
Electrical characteristicsRated uninterrupted current [Iu]
32 A
Electrical characteristicsNote on rated uninterrupted current !u
Rated uninterrupted current Iuis specified for max. cross-section.
Load rating with intermittent operation, class 12AB 25 % DF
2 x Ie
Load rating with intermittent operation, class 12AB 40 % DF
1.6 x Ie
Load rating with intermittent operation, class 12AB 60 % DF
1.3 x Ie
Short-circuit ratingFuse
35 A gG/gL
Rated short-time withstand current (1 s current) [Icw]
650 Arms
Note on rated short-time withstand current lcw
Current for a time of 1 second
Rated conditional short-circuit current [Iq]
1 kA
Switching capacity
cos ϕ rated making capacity as per IEC 60947-3
320 A
Rated breaking capacity cos ϕ to IEC 60947-3230 V
260 A
Rated breaking capacity cos ϕ to IEC 60947-3400/415 V
260 A
Rated breaking capacity cos ϕ to IEC 60947-3500 V
240 A
Rated breaking capacity cos ϕ to IEC 60947-3690 V
170 A
Safe isolation to EN 61140between the contacts
440 V AC
Safe isolation to EN 61140Current heat loss per contact at Ie
1.1 W
Safe isolation to EN 61140Current heat loss per auxiliary circuit at Ie(AC-15/230 V)
1.1 CO
Lifespan, mechanical [Operations]
> 0.5 x 106
Maximum operating frequency [Operations/h]
1200
ACAC-3Rating, motor load switch [P]220 V 230 V [P]
5.5 kW
ACAC-3Rating, motor load switch [P]230 V Star-delta [P]
7.5 kW
ACAC-3Rating, motor load switch [P]400 V 415 V [P]
11 kW
ACAC-3Rating, motor load switch [P]400 V Star-delta [P]
15 kW
ACAC-3Rating, motor load switch [P]500 V [P]
15 kW
ACAC-3Rating, motor load switch [P]500 V Star-delta [P]
18.5 kW
ACAC-3Rating, motor load switch [P]690 V [P]
11 kW
ACAC-3Rating, motor load switch [P]690 V Star-delta [P]
22 kW
ACAC-3Rated operational current motor load switch230 V [Ie]
23.7 A
ACAC-3Rated operational current motor load switch230 V star-delta [Ie]
32 A
ACAC-3Rated operational current motor load switch400V 415 V [Ie]
23.7 A
ACAC-3Rated operational current motor load switch400 V star-delta [Ie]
32 A
ACAC-3Rated operational current motor load switch500 V [Ie]
23.7 A
ACAC-3Rated operational current motor load switch500 V star-delta [Ie]
32 A
ACAC-3Rated operational current motor load switch690 V [Ie]
14.7 A
ACAC-3Rated operational current motor load switch690 V star-delta [Ie]
25.5 A
ACAC-21ARated operational current switch440 V [Ie]
32 A
ACAC-23AMotor rating AC-23A, 50 - 60 Hz [P]230 V [P]
7.5 kW
ACAC-23AMotor rating AC-23A, 50 - 60 Hz [P]400 V 415 V [P]
15 kW
ACAC-23AMotor rating AC-23A, 50 - 60 Hz [P]500 V [P]
15 kW
ACAC-23AMotor rating AC-23A, 50 - 60 Hz [P]690 V [P]
15 kW
ACAC-23ARated operational current motor load switch230 V [Ie]
32 A
ACAC-23ARated operational current motor load switch400 V 415 V [Ie]
32 A
ACAC-23ARated operational current motor load switch500 V [Ie]
26.4 A
ACAC-23ARated operational current motor load switch690 V [Ie]
17 A
DCDC-1, Load-break switches L/R = 1 msRated operational current [Ie]
25 A
DCDC-1, Load-break switches L/R = 1 msVoltage per contact pair in series
60 V
DCDC-21A [Ie]Rated operational current [Ie]
1 A
DCDC-21A [Ie]Contacts
1 Quantity
DCDC-23A, motor load switchL/R = 15 ms24 VRated operational current [Ie]
25 A
DCDC-23A, motor load switchL/R = 15 ms24 VContacts
1 Quantity
DCDC-23A, motor load switchL/R = 15 ms48 VRated operational current [Ie]
25 A
DCDC-23A, motor load switchL/R = 15 ms48 VContacts
2 Quantity
DCDC-23A, motor load switchL/R = 15 ms60 VRated operational current [Ie]
25 A
DCDC-23A, motor load switchL/R = 15 ms60 VContacts
3 Quantity
DCDC-23A, motor load switchL/R = 15 ms120 VRated operational current [Ie]
12 A
DCDC-23A, motor load switchL/R = 15 ms120 VContacts
3 Quantity
DCDC-23A, motor load switchL/R = 15 ms240 VRated operational current [Ie]
5 A
DCDC-23A, motor load switchL/R = 15 ms240 VContacts
5 Quantity
DCDC-13, Control switches L/R = 50 msRated operational current [Ie]
20 A
DCDC-13, Control switches L/R = 50 msVoltage per contact pair in series
24 V
Control circuit reliability at 24 V DC, 10 mA [Fault probability]
< 10-5,< 1 failure in 100,000 switching operations HF
Terminal capacities
Solid or stranded
1 x (1 - 6)
2 x (1 - 6) mm2
2 x (1 - 6) mm2
Flexible with ferrules to DIN 46228
1 x (0.75 - 4)
2 x (0.75 - 4) mm2
2 x (0.75 - 4) mm2
Terminal screw
M4
Tightening torque for terminal screw
1.6 Nm
Technical safety parameters:
Notes
B10dvalues as per EN ISO 13849-1, table C1
Rating data for approved types
Terminal capacityTerminal screw
M4
Design verification as per IEC/EN 61439
Technical data for design verification
Rated operational current for specified heat dissipation [In]
32 A
Heat dissipation per pole, current-dependent [Pvid]
1.1 W
Equipment heat dissipation, current-dependent [Pvid]
0 W
Static heat dissipation, non-current-dependent [Pvs]
0 W
Heat dissipation capacity [Pdiss]
0 W
Operating ambient temperature min.
-25 °C
Operating ambient temperature max.
+40 °C
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
UV resistance only in connection with protective shield.
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 4.0
Version as switch disconnector compact
No
Version as main switch
Yes
Version as maintenance-/service switch
Yes
Version as safety switch
No
Version as emergency stop installation
Yes
Max. rated operation voltage Ue AC
690 V
Rated permanent current Iu
32 A
Rated operation power AC-3, 400 V
12 kW
Rated operation power at AC-23, 400V
13 kW
Conditioned rated short-circuit current Iq
0 kA
Number of poles
6
Number of auxiliary contacts as normally closed contact
1
Number of auxiliary contacts as normally open contact
1
Number of auxiliary contacts as change-over contact
0
Motor drive optional
No
Motor drive integrated
No
Voltage release optional
No
Device construction
Complete device in housing
Suitable for ground mounting
Yes
Suitable for front mounting
No
Suitable for front mounting center
No
Suitable for distribution board installation
No
Suitable for intermediate mounting
No
Type of control element
-
Interlockable
Yes
Connection type main current circuit
Screw connection
Degree of protection (IP), front side
IP65
Dimensions
| Feature Name | Feature Value |
|---|---|
| Version as main switch (EF006981) | No |
| Version as maintenance-/service switch (EF006986) | No |
| Version as safety switch (EF006985) | No |
| Version as emergency stop installation (EF006959) | No |
| Version as reversing switch (EF009408) | No |
| Max. rated operation voltage Ue AC (EF007355) | 690 V |
| Rated permanent current Iu (EF001389) | 32 A |
| Rated operation power at AC-23, 400 V (EF007027) | 15 kW |
| Conditioned rated short-circuit current Iq (EF001444) | 1 kA |
| Number of poles (EF001391) | 6 |
| Number of auxiliary contacts as normally closed contact (EF001377) | 1 |
| Number of auxiliary contacts as normally open contact (EF001376) | 1 |
| Motor drive optional (EF007386) | No |
| Motor drive integrated (EF006697) | No |
| Voltage release optional (EF007491) | No |
| Suitable for front mounting 4-hole (EF007247) | No |
| Suitable for front mounting centre (EF007248) | No |
| Suitable for distribution board installation (EF007262) | No |
| Suitable for intermediate mounting (EF007264) | No |
| Interlockable (EF006281) | No |
| With pre-assembled cabling (EF016444) | No |
| Width (EF000008) | 185 mm |
| Height (EF000040) | 285 mm |
| Depth (EF000049) | 193 mm |
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF EATON SAFE SWITCHING EN.pdf | 935 Kbytes |
|
| PDF CATALOGUE EATON EN .pdf | 38 Mbytes |
|
| T3-4-15682/ST/SVB 025526 EN_025526.pdf | 295 Kbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
Add Review
hide form
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.