> >BPM-F-830/20/3-P-IVS 111392 ELECTRIC Floor-standing distribution board, IVS, IP55, HxWxD 2060x830x320mm
Previous Product Next Product
BPM-F-830/20/3-P-IVS 111392 EATON ELECTRIC Floor-standing distribution board, IVS, IP55, HxWxD 2060x830x320mm View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

BPM-F-830/20/3-P-IVS 111392 EATON ELECTRIC Floor-standing distribution board, IVS, IP55, HxWxD 2060x830x320mm

BPM-F-830/20/3-P-IVS

111392

EATON-MOELLER

Floor-standing distribution board, IVS, IP55, HxWxD=2060x830x320mm

More details


Home > EATON - MOELLER

* Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

More info

▲


Floor-standing distribution board, IVS, IP55, HxWxD=2060x830x320mm
Service distribution boards IVS are used for power distribution and measurement purposes in electrical systems for household electrical systems and in comparative systems such as residential buildings, schools, administration centers, offices and similar buildings.

Delivery program

Product range
Service distribution board IVS
Basic function
Floor-standing enclosures
Single unit/Complete unit
Complete housing
Degree of Protection
IP55 (with door and flange)
Description
Profi Plus basic enclosures
Monoblock enclosure with door and rotary lever
Including open cable entries top and bottom, prepared for F3A flange
Exchangeable door hinges
Covered hinges
Door opening angle 100°
Material
Sheet steel
Surface finish
Polyester powder coating
Phosphated
RAL 7035, light grey
Colour
light gray (RAL 7035)
Information about equipment supplied
Including mounting system for the IVS mounting units
including insulating surround and mounted insulated support bracket
Width
830 mm
Height
2060 mm
Depth
320 mm

Technical data

General
Standards
EN 60439-1/3
IEC 62208
Protection class
1
Degree of Protection
IP55 (with door and flange)
Power lossMax. admissible heat dissipation, ambient air temperature +35 °C
391 W
Weight
71 kg
Material characteristics
Material
Sheet steel
Surface treatment
Painting, phosphated and polyester powder coating
Surface finish
Polyester powder coating
Phosphated
RAL 7035, light grey
Colour
light gray (RAL 7035)
Material characteristicsType Door
Doors with covered hinges
Can be removed from 90°
Material characteristicsdoor opening angle
100° (single mounting)
Material characteristicsDoor interlock
Hinge handle with roller lever lock
Cylinder lock
Double-ward lock
Material properties
MechanicalImpact resistance
IK07
MechanicalCable entry
Open cable entry, prepared for F3A flanges
ElectricalRated operational voltage [Ue]
690 V
ElectricalRated frequency [f]
50 Hz
ElectricalRated operational current [Ie]
630 A
ElectricalMax. admissible heat dissipation, ambient air temperature +35 °C
391 W
ElectricalEarthings
M6 weld stud (base frame)
M5 self-tapping screw (enclosure side plate, top/bottom panel)
M6 weld stud (door)

Design verification as per IEC/EN 61439

Technical data for design verification
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890Individual enclosure, free-standing [PV]
220 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890Starting enclosure, free-standing [PV]
212 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890Middle enclosure, free-standing [PV]
205 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890Individual enclosure for wall mounting [PV]
200 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890Starting enclosure for wall mounting [PV]
195 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890Middle enclosure for wall mounting [PV]
195 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890Individual enclosure, free-standing [PV]
442 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890Starting enclosure, free-standing [PV]
426 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890Middle enclosure, free-standing [PV]
412 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890Individual enclosure for wall mounting [PV]
400 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890Starting enclosure for wall mounting [PV]
391 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890Middle enclosure for wall mounting [PV]
391 W
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Not relevant to indoor installations.
10.2 Strength of materials and parts10.2.5 Lifting
Met; assembled and secured as per the latest applicable instruction leaflet.
10.2 Strength of materials and parts10.2.6 Mechanical impact
IK10
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
IP55
10.4 Clearances and creepage distances
Is the panel builder's responsibility.
10.5 Protection against electric shock
< 0.1 Ω; meets the product standard's requirements.
10.6 Incorporation of switching devices and components
Is the panel builder's responsibility.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Ui= 440 V AC
10.9 Insulation properties10.9.3 Impulse withstand voltage
4 kV
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Does not apply to metal enclosures.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility.
10.13 Mechanical function
Meets the product standard's requirements.

Datasheet - PDF

▲
Title: Size: Type:
PDF CATALOGUE EATON EN.pdf 51 Mbytes

Reviews (0) ▲

No customer reviews for the moment.

Add Review
Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
Do you recommend this product to buy?
  Captcha
  Add review

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.