Selected parameters TYPE Roller Blind module HOUSING DIN-rail POWER SUPPLY DC Others TYPE Roller Blind module HOUSING 2-DIN POWER SUPPLY 15-24 VDC MAIN CHARACTERISTICS Roller blind module to control 2 DC motors
Smart Dupline® Control for DC Rollerblind Motor Type SH2RODC224 • Up/down control for two DC rollerblind motors • DC power supply • Relay load 5A • 2 DIN housing • LED indication for power supply, dupline® bus, motor up, motor down • Connection to other cabinet modulesvia local bus Product Description Ordering Key SH 2 RO DC 2 24 This is a 2-DIN relay output module to independently control two DC rollerblind motors. It has been developed to be connectedto and controlled by the smart-house system controllers. The rollerblind motor is driv- enbytworelays inseries: one to switch the motor ON/OFF and the second one to control the direction UP/DOWN. These two relays are controlled in such a way as to respect the motor tim- ingbeforeanyreversing of the motor direction. smart-house 2-DIN housing Rollerblind function DC motor Outputs number Power supply Type Selection Housing Mounting Relay loadRelay output Supply: 15 to 30 VDC 2 DIN DIN-rail 5A 2 SPST + 2 SPDT relay SH2RODC224 Output Specifications Supply Specifications Relay output2 SPST (R1, R2) + 2 SPDT (R3-R4) relay Resistive loadDC 13 5 A/24 VDC Mechanical life ≥ 10 x 106 operations Electrical life ≥ 1 x 105 operations Operating frequency ≤ 360 operations/h WiringM+ (M1), M- (M1) output for motor 1, (-), (+) motor supply voltage, M+ (M2), M- (M2) output for motor 2 Input Specifications KeypadFor local ON/OFF switching Power supplyOvervoltage cat. II (IEC 60664-1, par. 18.104.22.168) Rated operational voltage 15 to 24 VDC ± 20% Operational voltage range 15 to 30 VDC (ripple included) Rated operational power 3 W Protection for reverse polarity Yes Connection 2xA1 (+) and 2xA2 (-)- (2 pairs of terminals internally connected Max 3A) Power on delay Typ. 4 s Power off delay≤ 1 s Dupline® Specifications Voltage8.2 V MaximumDupline® voltage10 V Minimum Dupline® voltage 4.5 V MaximumDupline® current1.1 mA The Dupline® bus is present on the internal bus: the mod- ules can be connected one next to the other without the need of wiring the Dupline® bus. See “Wiring diagram”. Specifications are subject to change without notice (17.12.2013) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.