Surge protection device for data networks/MCR-technology

2800763

D-LAN-CAT.5-HC

-

Surge protection device

Surge protection for data networks up to 1 GBit/s. Use on Ethernet, Power over Ethernet (PoE, Mode A and Mode B), Token Ring, ISDN and DS1. RJ45 adapter with separate grounding line and fixing foot for DIN NS 35 rail.

2906807

TTC-6-2XTVSD-12DC-PT

-

Fine surge protection for two signal wires with common reference potential.

Fine surge protection for two signal conductors with common reference potential.

Fine surge protection for two signal wires with common reference potential.

2907839

TTC-6P-1X2-12DC-I-P

-

Surge protection plug with integrated status indicator on the module for a 2-wire floating signal circuit. Nominal voltage: 12 V  DC

Plug-in surge protection with status indicator integrated into the module for a potential-free 2-wire signal circuit. Rated voltage: 12 V DC

Surge protection plug with integrated status indicator on the module for a 2-wire floating signal circuit. Nominal voltage: 12 V  DC

2907840

TTC-6P-1X2-24DC-I-P

-

Protección enchufable contra sobretensiones con indicador de estado integrado en el módulo para un circuito de señales de 2 hilos libre de potencial. Tensión nominal: 24 V DC

Plug-in surge protection with status indicator integrated into the module for a potential-free 2-wire signal circuit. Rated voltage: 24 V DC

Protección enchufable contra sobretensiones con indicador de estado integrado en el módulo para un circuito de señales de 2 hilos libre de potencial. Tensión nominal: 24 V DC

2907841

TTC-6P-1X2-48DC-I-P

-

Surge protection plug with integrated status indicator on the module for a 2-wire floating signal circuit. Nominal voltage: 48 V  DC

Plug-in surge protection with status indicator integrated into the module for a potential-free 2-wire signal circuit. Rated voltage: 48 V DC

Surge protection plug with integrated status indicator on the module for a 2-wire floating signal circuit. Nominal voltage: 48 V  DC

2907842

TTC-6P-2X1-12DC-I-P

-

Surge protection plug with integrated status indicator on the module for two signal wires with a common reference potential. Nominal voltage: 12 V  DC

Pluggable surge protection with status indicator integrated into the module for two signal conductors with common reference potential. Rated voltage: 12 V DC

Surge protection plug with integrated status indicator on the module for two signal wires with a common reference potential. Nominal voltage: 12 V  DC

2907843

TTC-6P-2X1-24DC-I-P

-

Surge protection plug with integrated status indicator on the module for two signal wires with a common reference potential. Nominal voltage: 24 V DC

Pluggable surge protection with status indicator integrated into the module for two signal conductors with common reference potential. Rated voltage: 24 V DC

Surge protection plug with integrated status indicator on the module for two signal wires with a common reference potential. Nominal voltage: 24 V DC

2906862

TTC-6-GDT-D-24AC-PT-I

-

Coarse surge protection with integrated status indicator for a 2-wire floating signal circuit.

Sufficient surge protection with integrated status indication for a potential-free 2-wire signal circuit.

Coarse surge protection with integrated status indicator for a 2-wire floating signal circuit.

2906841

TTC-6-MOV-D-24DC-UT-I

-

Medium surge protection with integrated status indicator for a 2-wire floating signal circuit.

Medium surge protection with integrated status indication for a potential-free 2-wire signal circuit.

Medium surge protection with integrated status indicator for a 2-wire floating signal circuit.

2906854

TTC-6-MOV-C-24DC-PT-I

-

Medium surge protection with integrated status indicator for a signal wire with grounded reference potential.

Medium surge protection with integrated status indication for a signal conductor with grounded reference potential.

Medium surge protection with integrated status indicator for a signal wire with grounded reference potential.

2906779

TTC-6-3-HF-F-M-24DC-PT-I

-

Surge protection with integrated status indicator and knife disconnection for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps). Indirect grounding via gas-filled surge arrester.

Surge protection with integrated status indication and blade separation for three signal conductors with common reference potential. For high-frequency applications and telecommunication interfaces without supply voltage (up to 90 MBit/s). Indirect grounding by gas discharger.

Surge protection with integrated status indicator and knife disconnection for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps). Indirect grounding via gas-filled surge arrester.

2906840

TTC-6-MOV-C-120AC-UT-I

-

Medium surge protection with integrated status indicator for a signal wire with grounded reference potential.

Medium surge protection with integrated status indication for a signal conductor with grounded reference potential.

Medium surge protection with integrated status indicator for one signal wire with grounded reference potential. Can be used in safety-related circuits up to SIL 3.

2906852

TTC-6-TVSD-D-48DC-PT-I

-

Fine surge protection with integrated status indicator for a 2-wire floating signal circuit.

Fine surge protection with integrated status indication for a potential-free 2-wire signal circuit.

Fine surge protection with integrated status indicator for a 2-wire floating signal circuit.

2908208

TTC-6P-2X1-F-48DC-UT-I

-

Surge protection, consisting of protective plug and base element, with integrated status indicator for two signal wires with common reference potential, e.g., Digital IN/OUT. Indirect grounding via gas-filled surge arrester.

Surge protection, consisting of plug-in protection and base element, with integrated status indication for two signal conductors with common reference potential, e.g. digital INPUT/OUTPUT. Indirect grounding by gas discharger.

Surge protection, consisting of protective plug and base element, with integrated status indicator for two signal wires with common reference potential, e.g., Digital IN/OUT. Indirect grounding via gas-filled surge arrester.

2908200

TTC-6P-1X2-F-48DC-PT-I

-

Surge protection, consisting of protective plug and base element, with integrated status indicator for a 2-wire floating signal circuit. Indirect grounding via gas-filled surge arrester.

Surge protection, consisting of plug-in protection and base element, with integrated status indication for a potential-free 2-wire signal circuit. Indirect grounding by gas discharger.

Surge protection, consisting of protective plug and base element, with integrated status indicator for a 2-wire floating signal circuit. Indirect grounding via gas-filled surge arrester.

2906860

TTC-6-GDT-C-24AC-PT-I

-

Coarse surge protection with integrated status indicator for a signal wire with grounded reference potential.

Sufficient surge protection with integrated status indication for a signal conductor with grounded reference potential.

Coarse surge protection with integrated status indicator for a signal wire with grounded reference potential.

2906846

TTC-6-GDT-D-60AC-UT-I

-

Coarse surge protection with integrated status indicator for a 2-wire floating signal circuit.

Sufficient surge protection with integrated status indication for a potential-free 2-wire signal circuit.

Coarse surge protection with integrated status indicator for a 2-wire floating signal circuit.

2906732

TTC-6-3-HF-M-12DC-PT-I

-

Surge protection with integrated status indicator and knife disconnection for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps).

Surge protection with integrated status indication and blade separation for three signal conductors with common reference potential. For high-frequency applications and telecommunication interfaces without supply voltage (up to 90 MBit/s).

Surge protection with integrated status indicator and knife disconnection for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps). Can be used in safety-related circuits up to SIL 3.

2906848

TTC-6-TVSD-C-24DC-PT-I

-

Fine surge protection with integrated status indicator for a signal wire with grounded reference potential.

Fine surge protection with integrated status indication for a grounded signal conductor with reference potential.

Fine surge protection with integrated status indicator for a signal wire with grounded reference potential.

2906809

TTC-6P-1X2-24DC-UT-I

-

Surge protection, consisting of protective plug and base element, with integrated status indicator for a 2-wire floating signal circuit, e.g., 0(4) ... 20 mA current loop, HART-compatible.

Surge protection, consisting of plug-in protection and base element, with integrated status indication for a potential-free 2-wire signal circuit, e.g. 0(4) current loop ... 20 m, suitable for HART.

Surge protection, consisting of protective plug and base element, with integrated status indicator for a 2-wire floating signal circuit, e.g., 0(4) ... 20 mA current loop, HART-compatible.

2906817

TTC-6P-2-HC-24DC-PT-I

-

Surge protection, consisting of protective plug and base element, with integrated status indicator for a 2-wire floating signal circuit with high nominal current.

Surge protection, consisting of plug-in protection and base element, with integrated status indication for a potential-free 2-wire signal circuit with high rated current.

Surge protection, consisting of protective plug and base element, with integrated status indicator for a 2-wire floating signal circuit with high nominal current.

2906804

TTC-6-1X2-24DC-PT

-

Surge protection for a 2-wire floating signal circuit, e.g., 0(4) ... 20 mA current loop, HART-compatible.

Surge protection for a potential-free 2-wire signal circuit, e.g. current loop 0(4) ... 20 mA, suitable for HART.

Surge protection for a 2-wire floating signal circuit, e.g., 0(4) ... 20 mA current loop, HART-compatible.

2906786

TTC-6P-3-HF-F-M-12DC-UT-I

-

Surge protection, consisting of protective plug and base element, with integrated status indicator and knife disconnection for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage. Indirect grounding via gas-filled surge arrester.

Surge protection, consisting of plug-in protection and base element, with integrated status indication and blade interrupt for three signal conductors with common reference potential. For high-frequency applications and telecommunication interfaces without supply voltage. Indirect earthing by means of a gas discharger, EX e approval for zone 2.

Surge protection, consisting of protective plug and base element, with integrated status indicator and knife disconnection for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage. Indirect grounding via gas-filled surge arrester.

2906834

TTC-6-TVSD-D-24DC-UT-I

-

Fine surge protection with integrated status indicator for a 2-wire floating signal circuit.

Fine surge protection with integrated status indication for a potential-free 2-wire signal circuit.

Fine surge protection with integrated status indicator for a 2-wire floating signal circuit.

2908193

TTC-6P-1X2-12DC-PT-I

-

Surge protection, consisting of protective plug and base element, with integrated status indicator for a 2-wire floating signal circuit.

Surge protection, consisting of plug-in protection and base element, with integrated status indication for a potential-free 2-wire signal circuit.

Surge protection, consisting of protective plug and base element, with integrated status indicator for a 2-wire floating signal circuit.

2906857

TTC-6-MOV-C-60DC-PT-I

-

Medium surge protection with integrated status indicator for a signal wire with grounded reference potential.

Medium surge protection with integrated status indication for a signal conductor with grounded reference potential.

Medium surge protection with integrated status indicator for a signal wire with grounded reference potential.

2906721

TTC-6-3-HF-M-12DC-UT-I

-

Surge protection with integrated status indicator and knife disconnection for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps).

Surge protection with integrated status indication and blade separation for three signal conductors with common reference potential. For high-frequency applications and telecommunication interfaces without supply voltage (up to 90 MBit/s).

Surge protection with integrated status indicator and knife disconnection for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps). Can be used in safety-related circuits up to SIL 3.

2906831

TTC-6-TVSD-C-24DC-UT-I

-

Fine surge protection with integrated status indicator for a signal wire with grounded reference potential.

Fine surge protection with integrated status indication for a grounded signal conductor with reference potential.

Fine surge protection with integrated status indicator for one signal wire with grounded reference potential. Can be used in safety-related circuits up to SIL 3.

2908204

TTC-6P-2X1-48DC-PT-I

-

Surge protection, consisting of protective plug and base element, with integrated status indicator for two signal wires with common reference potential, e.g., Digital IN/OUT.

Surge protection, consisting of plug-in protection and base element, with integrated status indication for two signal conductors with common reference potential, e.g. digital INPUT/OUTPUT.

Surge protection, consisting of protective plug and base element, with integrated status indicator for two signal wires with common reference potential, e.g., Digital IN/OUT.

2906781

TTC-6P-1X2-F-M-24DC-UT-I

-

Surge protection, consisting of protective plug and base element, with integrated status indicator and disconnect knife for a 2-wire floating signal circuit, e.g., 0(4) ... 20 mA current loop. Indirect grounding via gas-filled surge arrester.

Surge protection, consisting of plug-in protection and base element, with integrated status indication and disconnector blade for a potential-free 2-wire signal circuit, e.g. 0(4) current loop ... 20 mA. Indirect earthing by gas discharger, suitable for HART.

Surge protection, consisting of protective plug and base element, with integrated status indicator and disconnect knife for a 2-wire floating signal circuit, e.g., 0(4) ... 20 mA current loop. Indirect grounding via gas-filled surge arrester.