Features
Fieldbus connection over separate bus coupler possible
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of assemblies
Meets the product standard's requirements.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
Burst impulse
According to IEC/EN 61131-2
Addressing
Address set via DIP switch
Admissible range
18 - 30 V DC, Networking
19.2 - 30 V DC, Networking
Configuration
Maximum station configuration: 32 modules (XN-322) in slice design
Bus termination
Via DIP switch, Networking
Explosion safety category for dust
Explosion safety category for gas
Surge rating
According to IEC/EN 61131-2
Emitted interference
30 - 230 MHz (radiated, high frequency, according to EN 61131-2)
230 - 1000 MHz (radiated, high frequency, according to EN 61131-2)
Safety performance level (EN ISO 13849-1)
Ambient operating temperature - max
Ambient operating temperature - min
Ambient storage temperature - max
Ambient storage temperature - min
Number of HW-interfaces CAN
Connection type
Push-In spring-cage terminals, Field bus
Push-In spring-cage terminals, Connection design in TOP direction
Drop and topple
According to IEC 60068-2-31, free fall according to IEC 60068-2-32
Data transfer rate
Setting through DIP switch or automatically
1000 kBit/s, Networking
10 kBit/s, Networking
125 kBit/s, Networking
20 kBit/s, Networking
500 kBit/s, Networking
50 kBit/s, Networking
250 kBit/s, Networking
800 kBit/s, Networking
Relative humidity
5 - 95 % (non-condensing)
Gauge pin
A1 (according to IEC/EN 60947-1)
Vibration resistance
According to IEC/EN 60068-2-6
Shock resistance
Mechanical, According to IEC/EN 60068-2-27
Interfaces
CANopen®, Field bus connection
Mini-USB Type B (Service interface)
Voltage dips
According to EN 61131-2 (Voltage fluctuations/voltage dips)
Protocol
CAN
CANopen®
Other bus systems
Number of HW-interfaces (other)
Number of HW-interfaces (USB)
Terminal capacity
0.2 - 1.5 mm², flexible without ferrule, H07V-K
0.25 - 1.5 mm², with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)
0.2 - 1.5 mm², solid, H07V-U
0.25 - 1.5 mm², with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)
Static heat dissipation, non-current-dependent Pvs
Stripping length (main cable)
Supply voltage at AC, 50 Hz - max
Supply voltage at AC, 50 Hz - min
Supply voltage at AC, 60 Hz - max
Supply voltage at AC, 60 Hz - min
Supply voltage at DC - max
Supply voltage at DC - min