VBS Connection and fastening systems - OBO BETTERMANN

1174614

2056 E 37 FT

-

CLAMP ON PROFILE 2056 E 37 FT

Clamp clip, hammer-head base, 3x single-wire connection. Clip element, bolt and lock plate made of hot-dip galvanised steel, pressure and counter-trough made of polypropylene, halogen-free, light grey RAL 7035.Delivered complete with lock plate and counter-troughs.

1198028

2058UW 28 LGR

-

Universal counter-trough, plastic, 28 - 34 mm, light gray, RAL 7035, Polypropylene

Universal counter-trough, plastic. Regardless of the type of rail, the counter-trough can be used by applying it onto one side of the clamp clip. Due to an intelligent contour on the backside, the counter-trough can be combined to a double trough. Retrofitting possible without the need to dismantle.

1198012

2058UW 12 LGR

-

Universal counter-trough, plastic, 8 - 12 mm, light gray, RAL 7035, Polypropylene

Universal counter-trough, plastic. Regardless of the type of rail, the counter-trough can be used by applying it onto one side of the clamp clip. Due to an intelligent contour on the backside, the counter-trough can be combined to a double trough. Retrofitting possible without the need to dismantle.

1198016

2058UW 16 LGR

-

Universal counter-trough, plastic, 12 - 16 mm, light gray, RAL 7035, Polypropylene

Universal counter-trough, plastic. Regardless of the type of rail, the counter-trough can be used by applying it onto one side of the clamp clip. Due to an intelligent contour on the backside, the counter-trough can be combined to a double trough. Retrofitting possible without the need to dismantle.

1198022

2058UW 22 LGR

-

Universal counter-trough, plastic, 16 - 22 mm, light gray, RAL 7035, Polypropylene

Universal counter-trough, plastic. Regardless of the type of rail, the counter-trough can be used by applying it onto one side of the clamp clip. Due to an intelligent contour on the backside, the counter-trough can be combined to a double trough. Retrofitting possible without the need to dismantle.

1198034

2058UW 34 LGR

-

Universal counter-trough, plastic, 22 - 28 mm, light gray, RAL 7035, Polypropylene

Counter-mid-calf 2058UW 34 LGR, combinable with double cane 28-34mm Polypropylene, PP,

Universal counter-mid-calf, plastic. Regardless of the type of rail, it can be applied universally by inserting it on one side of the clamp on profile. Thanks to a clever profile on the back, it can be combined with the double tray. Subsequent installation without having to disassemble the clamp on profile.

1198040

2058UW 40 LGR

-

Universal counter-trough, plastic, 34 - 40 mm, light gray, RAL 7035, Polypropylene

Universal counter-trough, plastic. Regardless of the type of rail, the counter-trough can be used by applying it onto one side of the clamp clip. Due to an intelligent contour on the backside, the counter-trough can be combined to a double trough. Retrofitting possible without the need to dismantle.

1198046

2058UW 46 LGR

-

Universal counter-trough, plastic, 40 - 46 mm, light gray, RAL 7035, Polypropylene

Universal counter-trough, plastic. Regardless of the type of rail, the counter-trough can be used by applying it onto one side of the clamp clip. Due to an intelligent contour on the backside, the counter-trough can be combined to a double trough. Retrofitting possible without the need to dismantle.

1198052

2058UW 52 LGR

-

Universal counter-trough, plastic, 46 - 52 mm, light gray, RAL 7035, Polypropylene

Universal counter-trough, plastic. Regardless of the type of rail, the counter-trough can be used by applying it onto one side of the clamp clip. Due to an intelligent contour on the backside, the counter-trough can be combined to a double trough. Retrofitting possible without the need to dismantle.

1198058

2058UW 58 LGR

-

Universal counter-trough, plastic, 52 - 58 mm, light gray, RAL 7035, Polypropylene

Universal counter-trough, plastic. Regardless of the type of rail, the counter-trough can be used by applying it onto one side of the clamp clip. Due to an intelligent contour on the backside, the counter-trough can be combined to a double trough. Retrofitting possible without the need to dismantle.

1198064

2058UW 64 LGR

-

Universal counter-trough, plastic, 58 - 64 mm, light gray, RAL 7035, Polypropylene

Universal counter-trough, plastic. Regardless of the type of rail, the counter-trough can be used by applying it onto one side of the clamp clip. Due to an intelligent contour on the backside, the counter-trough can be combined to a double trough. Retrofitting possible without the need to dismantle.

1198070

2058UW 70 LGR

-

Universal counter-trough, plastic, 64 - 70 mm, light gray, RAL 7035, Polypropylene

Universal counter-trough, plastic. Regardless of the type of rail, the counter-trough can be used by applying it onto one side of the clamp clip. Due to an intelligent contour on the backside, the counter-trough can be combined to a double trough. Retrofitting possible without the need to dismantle.

1198076

2058UW 76 LGR

-

Universal counter-trough, plastic, 70 - 76 mm, light gray, RAL 7035, Polypropylene

Universal counter-trough, plastic. Regardless of the type of rail, the counter-trough can be used by applying it onto one side of the clamp clip. Due to an intelligent contour on the backside, the counter-trough can be combined to a double trough. Retrofitting possible without the need to dismantle.

1198082

2058UW 82 LGR

-

Universal counter-trough, plastic, 76 - 82 mm, light gray, RAL 7035, Polypropylene

Counter-mid-calf 2058UW 82 LGR, combinable with double cane 76-82mm Polypropylene, PP,

Universal counter tray, plastic

1198090

2058UW 90 LGR

-

Universal counter-trough, plastic, 82 - 90 mm, light gray, RAL 7035, Polypropylene

Counter-mid-round 2058UW 90 LGR, combinable with double cane 82-90mm Polypropylene, PP,

Universal counter-mid-calf, plastic. Regardless of the type of rail, it can be applied universally by inserting it on one side of the clamp on profile. Thanks to a clever profile on the back, it can be combined with the double tray. Subsequent installation without having to disassemble the clamp on profile.

1198100

2058UW 100 LGR

-

Universal counter-trough, plastic, 90 - 100 mm, light gray, RAL 7035, Polypropylene

Universal counter-trough, plastic. Regardless of the type of rail, the counter-trough can be used by applying it onto one side of the clamp clip. Due to an intelligent contour on the backside, the counter-trough can be combined to a double trough. Retrofitting possible without the need to dismantle.

2205380

2031 10

-

Grip 10. Cable tidy for general use with fastening holes of Ø 6 mm, suitable for wall and ceiling mounting. The moulded fastening element can be fastened using knock-in anchors or a gas pressure nail gun. The recommended fastening spacing when assigned fully is 50 to 60 cm.Capacity:2031/ 10 max. 10 cables NYM 3 x 1.5 mm²

6410081

CSTR M8 G

-

Connection sleeve for threaded rod, M8x30mm, Electrogalvanised, DIN 50961, Steel, St

Connection sleeve. Connection sleeve with continuous internal thread.

6410103

CSTR M10 G

-

Connection sleeve for threaded rod, M10x40mm, Electrogalvanised, DIN 50961, Steel, St

Connection sleeve. Connection sleeve with continuous internal thread.

6410111

CSTR M12 G

-

Connection sleeve for threaded rod, M12x40mm, Electrogalvanised, DIN 50961, Steel, St

CSTR M12 G union sleeve, for threaded rods M12x40mm Steel, St, electrozinc, EN ISO 19598 / EN ISO 4042

G union sleeve. Union sleeve with continuous internal thread.

6410154

CSTR M8 A2

-

Connection sleeve for threaded rod, M8x30mm, Stainless steel, grade 304, VA, 1.4301

Connection sleeve V2A. Connection sleeve with continuous internal thread.

6410162

CSTR M10 A2

-

Connection sleeve for threaded rod, M10x40mm, Stainless steel, grade 304, VA, 1.4301

Connection sleeve V2A. Connection sleeve with continuous internal thread.

2003426

HG 60-35

-

Box, empty cavity wall, Ø68mm, H35mm, Orange, Polypropylene, PP

Box for HG 60-35 mechanisms, hollow wall Ø68mm, H35mm Polypropylene, PP,

Mechanism box for hollow walls

2003430

HV 70 D

-

Connection plug cavity wall, Ø74mm, H50mm, Orange, Polypropylene, PP

2003442

HV 60

-

Device/connection plug cavity wall, Ø68mm, H61mm, Orange, Polypropylene, PP

HV 60 connection box/mechanisms, hollow wall Ø68mm, H61mm Polypropylene, PP,

Mechanism or connection box for hollow walls.. Mechanism/connection box for hollow walls. Dimensions according to DIN 49073-1, for a plate thickness between 7 and 35 mm. Standard combination distance of 71 mm, possibility of wiring between boxes with the help of connecting connectors With combinations between mechanism boxes and mechanism junction boxes, the mechanism boxes can also be used as junction boxes according to VDE 0606-1 with double screw fixing and screwed cover, IP30 degree of protection. IEC 60670-1, IEC 60670-22 and DIN 49073-1 standards.

2003449

HV 100 KD

-

Hollow wall, connection box cavity wall, 105x105x50, Orange, Polypropylene, PP

Cavity wall connection box. Cavity wall connection box for use in cavity walls with an installation depth of at least 50 mm and a plate thickness of 7-35 mm. With white cover and cover screws. Suitable for installation of standard rails (hat and support rails) for series terminals.• 8 entries of Ø 20 mm• 8 entries for NYM cables 3 x 1.5 mm²• 4 entries for data cables (extra-low voltage)According to IEC 60670-1, IEC 60670-22 and DIN 49073-1.

2003603

HG 60-35 MW

-

Box, empty cavity wall 2K, Ø68mm, H35mm, Orange, Polypropylene, PP

2003611

HG 60 MW

-

Box, empty cavity wall 2K, Ø68mm, H47mm, Orange, Polypropylene, PP

HG 60 MW mechanism box, hollow wall 2K Ø68mm, H47mm Polypropylene, PP,

Mechanism box for technical walls (plasterboard), airtight. Mechanism box for hollow walls, draught-tight version thanks to the soft membrane of the inlets. Dimensions according to DIN 49073-1, for a plate thickness between 7 and 35 mm. Standard combination distance of 71 mm, wiring possible via connection connectors with combinations between mechanism boxes and mechanism connection boxes. The mechanism boxes can also be used as junction boxes according to VDE 0606-1 with double screw fastening and screw-on cover with IP40 degree of protection. Includes 12 union connectors. IEC 60670-1, IEC 60670-22 and DIN 49073-1 standards.

2003619

HV 60 MW

-

Device/connection plug cavity wall 2K, Ø68mm, H61mm, Orange, Polypropylene, PP

2007029

T 25

-

Junction box with entries, Ø80x51, Light grey, 7035, Polypropylene, PP

T 25 junction box, with cones Ø80x51 Polypropylene, PP,

T 25 junction box, with cones. Junction box for connecting cables and lines in indoor and protected outdoor areas. Round shape with insertable joints on the sides and blind entries on the floor. Suitable for wall and ceiling mounting, mounting on sheet metal and threaded structures on the floor. With the possibility of interior fixation. With fixed terminal cap. Made with halogen-free and UV-resistant materials. Junction box according to DIN EN 60670. Anti-flammable according to DIN EN 60695-2-11, test temperature 650 °C. IK07 impact resistance according to DIN EN 50102.