VBS Pizza Plastic fixing - OBO BETTERMANN

SOM clip , 5-14mm, Light grey, 7035, Polystyrene, PS

SOM clip, single. With plastic screws, so corrosion-protected, with slot for fastening with wood screws or 5 mm knock-in anchors.

SOM clip , 15-25mm, Light grey, 7035, Polystyrene, PS

SOM clip, single. With plastic screws, so corrosion-protected, with slot for fastening with wood screws or 5 mm knock-in anchors.

SOM clip , 32-45mm, Light grey, 7035, Duroplast, Aminoplast, type 131.5, UF, Typ 131.5

SOM clip, single, hardly flammable. With plastic screws, so corrosion-protected, with slot for fastening with wood screws or 5 mm knock-in anchors.Hardly flammable.

Klick-Snap clip , 16-21,5mm, Light grey, 7035, Polyamide, PA

Click-snap clip. With moulded-on push-fit plug for rapid mounting in concrete walls and masonry.Push plug into hole until the clip makes contact with the surface. When the pipe is pressed into the clip, the arms of the clip grip it.

BKS clamp , 3-13mm, Light grey, 7035, Polyamide, PA

BKS 1973 3-13 LGR 3-13mm Light Grey Clamp-Plug, RAL 7035 Polyamide, PA

BKS clamp , 20-40mm, Light grey, 7035, Polyamide, PA

BKS clamp clip. For cables, flexible pipes and all kinds of insulating and armoured steel pipes, suitable for concrete, calcareous limestone and full brick. Use in gas concrete masonry is possible, but reduced load capacities must be expected.

Grip collecting clamp , 40x NYM3x1,5, Light grey, 7035, Polypropylene, PP

Grip 40. Cable tidy for general use with fastening holes of Ø 6 mm, suitable for wall and ceiling mounting. The moulded fastening element can be fastened using knock-in anchors or a gas pressure nail gun. The recommended fastening spacing when assigned fully is 250–400 mm.With multifunctional fastening element. Capacity: 2031/ 40 max. 40 cables NYM 3 x 1.5 mm²

Push-fit plug for cable ties, 6x30mm, Light grey, 7035, Polyamide, PA

Push-fit anchor for cable ties. The push-fit anchor can accept a cable tie (type 550 or 555) up to 9 mm wide, which can be used to install several cables and pipes.Suitable for concrete, lime sandstone and brickwork as solid brick. Use in gas concrete masonry is possible, but reduced load capacities must be expected.

SOM clip 2 cables, 6-17mm, Light grey, 7035, Polystyrene, PS

Snap clip , 16-19mm, Light grey, 7035, Polyamide, PA

Snap clip. With moulded-on push-fit plug for rapid mounting in concrete walls and masonry.Push plug into hole until the clip makes contact with the surface. When the pipe is pressed into the clip, the arms of the clip grip it.

Plug-in clip single, 16-23mm, Light grey, 7035, Polyamide, PA

Single push-fit clip. These push-fit clips are used when installing cables and pipes on walls and ceilings and when running flexible pipes on concrete and in the screed. The single push-fit clips can be used instead of nail clips in concrete and aerated concrete. The advantage of the push-fit clips is that they only have to be pushed into the drilled hole. Anchors and bolts are not needed.

Plug-in clip double, 4-12mm, Light grey, 7035, Polyamide, PA

Grip collecting clamp flame-resistant to 960°C, 10x NYM3x1,5, Stone grey, 7030, Polypropylene, PP

Grip collecting clamp flame-resistant to 960°C, 20x NYM3x1,5, Stone grey, 7030, Polypropylene, PP

Grip 20 flame-resistant. Cable tidy with moulded fastening element, for mounting up to 20 cables NYM 3 x 1.5 mm2 on walls or ceilings. Fastening with impact anchor or push-fit anchor. Fastening hole: Ø 6 mm. Recommended fastening distance of 250–400 cm when fully assigned, depending on the respective national specifications/norms. Flame resistant to DIN VDE 0471/DIN IEC 695 Part 2-1, test temperature 960 °C.With multifunctional fastening element.Capacity: 2031/ 20 max. 20 cables NYM 3 x 1.5 mm²

Strip clip single lock, 6x180mm, Black, Polyamide, PA

Strip clip single lock, 6x360mm, Black, Polyamide, PA

Strip clip double lock, 9x265mm, Black, Polyamide, PA

Strip clip double lock, 9x510mm, Black, Polyamide, PA

Cable tie , 2,4x75mm, White, Polyamide, PA

Cable tie , 2,5x165mm, White, Polyamide, PA

Cable tie , 3,6x150mm, White, Polyamide, PA

Cable tie , 3,6x290mm, White, Polyamide, PA

Cable tie , 4,8x310mm, White, Polyamide, PA

Cable tie , 7,6x200mm, White, Polyamide, PA

Cable tie , 7,6x380mm, White, Polyamide, PA

Cable tie , 3,6x150mm, Black, Polyamide, PA

Cable tie , 4,8x200mm, Black, Polyamide, PA

Cable tie , 4,8x370mm, Black, Polyamide, PA

Cable tie , 2,5x100mm, Black, Polyamide, PA

Cable tie , 3,6x200mm, Black, Polyamide, PA

Cable tie , 4,8x310mm, Black, Polyamide, PA

Cable tie , 7,6x380mm, Black, Polyamide, PA

Push-fit plug with mushroom, 6x30mm, Grey-white, 9002, Polyamide, PA

Push-fit anchor with mushroom head. The push-fit anchor allows simple mounting, e.g. of labelling panels or small WDK ducts.Suitable for concrete, lime sandstone and brickwork as solid brick. Use in gas concrete masonry is possible, but reduced load capacities must be expected.