VBS junction boxes - OBO BETTERMANN

Junction box , 80x43x34, Light grey, 7035, Polyethylene, PE

Junction box A 6, Junction box 80x43x34 Polyethylene, PE,

Junction box A 6. Protection rating IP55, rated voltage 690 V, nominal cross-section 2.5 mm², 6 entries for cable diameter 5‒14 mm4 entries for cable diameter 5–9 mm.Clamshell.Dimensions: 80 x 43 x 36 mmClear internal dimensions: 69 x 32 x 30 mm1 cut-out tool for every 10 boxes

Junction box with entries, 90x90x52, Light grey, 7035, Polypropylene, PP

Junction box T 40, plug-in seal. Junction box for the connection of cables indoors and in protected outdoor areas. Square design with plug-in seals to the sides and knock-out entries in the bottom. Suitable for wall and ceiling mounting and on mounting panels. With the option to fasten inside. With fixed clamping cover. Made from halogen-free, UV-resistant materials.Junction box according to DIN EN 60670. Flame-resistant to DIN EN 60695/2/11, test temperature 650 °C. Impact resistance IK07 according to DIN EN 50102.

Junction box , 75x75x36, Light grey, 7035, Polyethylene, PE

Junction box A 8, 75x75x36 Polyethylene, PE,

Junction box A 8. Protection rating IP55, rated voltage 690 V, nominal cross-section 2.5 mm², 7 entries for cable diameter 5‒14 mm.Clamshell.Dimensions: 75 x 75 x 36.2 mmClear internal dimensions: 65 x 65 x 32 mm1 cut-out tool for every 10 boxesA8 VDE empty: without terminal block

Junction box , 100x100x38, Light grey, 7035, Polyethylene, PE

Junction box A 14. Protection rating IP55, rated voltage 690 V, nominal cross-section 2.5 mm², 8 entries for cable diameter 5‒14 mm8 entries for cable diameter 5–11 mm.Clamshell.Dimensions: 100 x 100 x 40 mmClear internal dimensions: 90 x 90 x 35 mm1 cut-out tool for every 10 boxes

Junction box , 125x100x38, Light grey, 7035, Polyethylene, PE

Junction box A 18. Protection rating IP55, rated voltage 690 V, nominal cross-section 2.5 mm², 10 entries for cable diameter 5‒14 mm8 entries for cable diameter 5‒11 mm.Clamshell.Dimensions: 125 x 100 x 40 mmClear internal dimensions: 115 x 90 x 35 mm1 cut-out tool for every 10 boxes

Junction box with entries, 114x114x57, Light grey, 7035, Polypropylene, PP

Junction box T 60, plug-in seal. Junction box for the connection of cables and lines indoors and in protected outdoor areas. Square design with plug-in seals to the sides and knock-out entries in the bottom. Suitable for wall and ceiling mounting and on mounting panels. With the option to fasten inside and to mount via the corner domes. Cover with quick lock, sealable. Made from halogen-free and UV-resistant materials. Junction box according to DIN EN 60670. Flame-resistant to DIN EN 60695/2/11, test temperature 650 °C. Impact resistance IK07 according to DIN EN 50102.

Junction box with 10xM32 entries, 190x150x77, Light grey, 7035, Polypropylene, Glass-fibre reinforced, PP/GF

Junction box T 160, with 10xM32 entries. Junction box for the connection of cables and lines indoors and in protected outdoor areas. Rectangular design with plug-in seals to the sides and knock-out entries in the bottom. Suitable for wall and ceiling mounting and on mounting panels. With the option to fasten inside and to mount via the corner domes. Cover with quick lock, sealable. Made from halogen-free and UV-resistant materials. Junction box according to DIN EN 60670. Flame-resistant to DIN EN 60695/2/11, test temperature 650 °C. Impact resistance IK05 according to DIN EN 50102.

Junction box without insertion opening, 90x90x52, Light grey, 7035, Polypropylene, PP

Junction box T 40, closed. Junction box for the connection of cables and lines indoors and in protected outdoor areas. Square design without entries. Suitable for wall and ceiling mounting and on mounting panels. With the option to fasten inside and to mount via the corner domes. With fixed clamping cover. Made from halogen-free and UV-resistant materials. Junction box according to DIN EN 60670. Flame-resistant to DIN EN 60695/2/11, test temperature 650 °C. Impact resistance IK07 according to DIN EN 50102.

Junction box without insertion opening, 151x117x67, Light grey, 7035, Polypropylene, PP

Junction box T 100, closed. Junction box for the connection of cables and lines indoors and in protected outdoor areas. Rectangular design without entries. Suitable for wall and ceiling mounting and on mounting panels. With the option to fasten inside and to mount via the corner domes. Cover with quick lock, sealable. Made from halogen-free and UV-resistant materials. Junction box according to DIN EN 60670. Flame-resistant to DIN EN 60695/2/11, test temperature 650 °C. Impact resistance IK07 according to DIN EN 50102.

Junction box without insertion opening, 240x190x95, Light grey, 7035, Polypropylene, Glass-fibre reinforced, PP/GF

Junction box T 250, closed. Junction box for the connection of cables and lines indoors and in protected outdoor areas. Rectangular design without entries. Suitable for wall and ceiling mounting, on mounting panels and threads in the floor. With the option to fasten inside and to mount via the corner domes. Cover with quick lock, sealable. Made from halogen-free and UV-resistant materials. Junction box according to DIN EN 60670. Flame-resistant to DIN EN 60695/2/11, test temperature 650 °C. Impact resistance IK05 according to DIN EN 50102.

Junction box with raised cover, 114x114x76, Light grey, 7035,

Junction box T60, plug-in seal, elevated cover. Junction box for the connection of cables and lines indoors and in protected outdoor areas. Square design with plug-in seals to the sides and knock-out entries in the bottom. Suitable for wall and ceiling mounting and on mounting panels. With the option to fasten inside and to mount via the corner domes. High cover with quick lock, sealable. Made from halogen-free and UV-resistant materials.With hat profile rail.Junction box according to DIN EN 60670. Flame-resistant to DIN EN 60695/2/11, test temperature 650 °C. Impact resistance IK07 according to DIN EN 50102.Clear internal dimensions: 100x100x65 mm

Junction box with raised cover, 190x150x94, Light grey, 7035,

T 160 HD LGR junction box, with high lid 190x150x94 Polypropylene/polycarbonate, PP/PC,

T 160 junction box, with high lid and cones

Junction box, closed with raised cover, 114x114x76, Light grey, 7035,

Junction box T60, closed, elevated cover. Closed junction box for the connection of cables and lines indoors and in protected outdoor areas. Square design without entries. Suitable for wall and ceiling mounting and on mounting panels. With the option to fasten inside and to mount via the corner domes. High, transparent cover with quick lock, sealable. Made from halogen-free and UV-resistant materials.With hat profile rail.Junction box according to DIN EN 60670. Flame-resistant to DIN EN 60695/2/11, test temperature 650 °C. Impact resistance IK07 according to DIN EN 50102. Clear internal dimensions: 100x100x63 mm

Junction box, closed with raised cover, 190x150x94, Light grey, 7035,

T 160 OE HD LGR blind junction box, with high cover 190x150x94 Polypropylene/polycarbonate, PP/PC,

Junction box T160, closed, elevated cover. Closed junction box for the connection of cables and lines indoors and in protected outdoor areas. Rectangular design without entries. Suitable for wall and ceiling mounting and on mounting panels. With the option to fasten inside and to mount via the corner domes. High, transparent cover with quick lock, sealable. Made from halogen-free and UV-resistant materials.With hat profile rail. Junction box according to DIN EN 60670. Flame-resistant to DIN EN 60695/2/11, test temperature 650 °C. Impact resistance IK04 according to DIN EN 50102. Clear internal dimensions: 176x135x84 mm

Junction box, closed with raised cover, 285x201x139, Light grey, 7035,

T 350 OE HD LGR blind junction box, with high lid 285x201x139 Polypropylene/polycarbonate, PP/PC,

T 350 junction box, with high lid, closed. Closed junction box for connecting cables and lines in indoor and protected outdoor areas. Rectangular shape without inputs. Suitable for wall and ceiling mounting, mounting on sheet metal and threaded structures on the floor. With the possibility of interior fixing and assembly by means of corner domes. High lid with quick closure, sealable. Made with halogen-free and UV-resistant materials. Includes profile rail. Junction box according to DIN EN 60670. Anti-flammable according to DIN EN 60695-2-11, test temperature 650 °C. IK05 impact resistance according to DIN EN 50102. Interior measurements: 267x182x127 mm

Junction box with high transparent cover, 150x116x83, Light grey, 7035,

T 100 HD TR junction box, with high transparent lid 150x116x83 Polypropylene/polycarbonate, PP/PC,

Junction box T100, with plug-in seal, transparent elevated cover. Junction box for the connection of cables and lines indoors and in protected outdoor areas. Rectangular design with plug-in seals to the sides and knock-out entries in the bottom. Suitable for wall and ceiling mounting and on mounting panels. With the option to fasten inside and to mount via the corner domes. High, transparent cover with quick lock, sealable. Made from halogen-free and UV-resistant materials.With hat profile rail.Junction box according to DIN EN 60670. Flame-resistant to DIN EN 60695/2/11, test temperature 650 °C. Impact resistance IK07 according to DIN EN 50102.Clear internal dimensions: 136x102x74 mm

Junction box with high transparent cover, 240x190x115, Light grey, 7035,

Junction box T250, with plug-in seal, transparent elevated cover. Junction box for the connection of cables and lines indoors and in protected outdoor areas. Rectangular design with plug-in seals to the sides and knock-out entries in the bottom. Suitable for wall and ceiling mounting, on mounting panels and threads in the floor. With the option to fasten inside and to mount via the corner domes. High, transparent cover with quick lock, sealable. Made from halogen-free and UV-resistant materials.With hat profile rail.Junction box according to DIN EN 60670. Flame-resistant to DIN EN 60695/2/11, test temperature 650 °C. Impact resistance IK05 according to DIN EN 50102. Clear internal dimensions: 225x173x103 mm

Junction box, closed with high transparent cover, 150x116x83, Light grey, 7035,

Junction box T100, closed, transparent elevated cover. Closed junction box for the connection of cables and lines indoors and in protected outdoor areas. Rectangular design without entries. Suitable for wall and ceiling mounting and on mounting panels. With the option to fasten inside and to mount via the corner domes. High, transparent cover with quick lock, sealable. Made from halogen-free and UV-resistentant materials. With hat profile rail.Junction box according to DIN EN 60670. Flame-resistant to DIN EN 60695/2/11, test temperature 650 °C. Impact resistance IK07 according to DIN EN 50102. Clear internal dimensions: 136x102x74 mm

Junction box, closed with high transparent cover, 240x190x115, Light grey, 7035,

Junction box T250, closed, transparent elevated cover. Closed junction box for the connection of cables in indoor and protected outdoor areas. Rectangular design without entries. Suitable for wall and ceiling mounting, on mounting panels and threads in the floor. With the option of fastening inside and to mount via the corner domes. High, transparent cover with quick lock, sealable. Made from halogen-free, UV-resistant materials.With hat profile rail. Junction box according to DIN EN 60670. Flame-resistant to DIN EN 60695/2/11, test temperature 650°C. Impact resistance IK05 according to DIN EN 50102. Clear internal dimensions: 225x173x102 mm

Fastening element T60-T100 for mesh cable trays, Light grey, Polycarbonate, PC

Fastening element for junction box on mesh cable trays. The fastening element BE TS GR can be used to attach OBO junction boxes, type T60 and T100, to mesh cable trays quickly and in a few actions.This keeps the junction box securely in position. However, it can be quickly dismantled as necessary.

Aluminium empty housing , 80x75x57, Light grey, 7035, Powder-coated, Cast aluminium, AlG

Aluminium empty housing Mx08, powder coated. Robust aluminium empty housing for mechanical engineering and automation technology.The OBO Mx series’ excellent mechanical and thermal features make it most suitable for extreme demands in many different areas. It is therefore also best suited for applications in industry, ports and shipbuilding, as well as in the agricultural sector.The products protect the electrical installation against high-grade strains. They withstand both extreme cold and heat as well as vandalism and impact on roads, railways or in tunnels. With an IP66 protection class, they are optimally protected against the intrusion of dust and water. The aluminium housings are powder-coated (RAL 7001) and are delivered with a cover including stainless steel screws, a seal and tw

Plug-in seal for pipes, Ø25/20-25, Light grey, 7035, Polyvinylchloride, PVC

Plug-in seal for pipes, light grey. Plug-in seal for junction boxes for direct insertion of metric pipes

Plug-in seal for pipes, Ø40/32-40, Light grey, 7035, Polyvinylchloride, PVC

Plug-in seal for pipes, light grey. Plug-in seal for junction boxes for direct insertion of metric pipes

Junction box , 80x43x34, Pure white, 9010, Polyethylene, PE

Junction box A 6 HF RW, 80x43x34 Polyethylene, PE,

Hollow wall, connection box concealed, 100x100x45, Black, Polystyrene, PS

UV 100 K connection box, recessed 100x100x45 Polystyrene, PS,

Recessed box of 100. Recessed box for connections, use in masonry with an installation depth of at least 45 mm. With lid and screws for lid (15 mm) The edge of the lid rests in a flat position, the surface is grated. • 4 side combined conduit entries Ø 28.5 and 21.5 mm• 8 side entries Ø 21.5 mm• 8 side entries for flat/ribbed cables• 4 combined pipe entries Ø 28.5 and 21.5 mm on the ground• 8 flat cable/ribbed entries on the floor

Hollow wall, connection box concealed, 200x200x65, Black, Polystyrene, PS

UV 200 K connection box, recessed 200x200x65 Polystyrene, PS,

Recessed box of 200. Recessed box for connections, use in masonry with an installation depth of at least 65 mm With cover and screws for cover (15 mm) The edge of the cover rests in a flat position, the surface is scratched. • 4 x Ø 34.6 and 28.5 mm side combination conduit entries• 8 x Ø 28.5 and 21.5 mm lateral combination conduit entries• 8 x Flat/Ribbed Cable Side Entries• 2 x Ø 34.6 and 28.5 mm Combined Pipe Entries on the floor• 2 x Flat Cable/Flat Cable Entries on the floor

Hollow wall, connection box cavity wall, 105x105x50, Orange, Polypropylene, PP

Cavity wall connection box. Cavity wall connection box for use in cavity walls with an installation depth of at least 50 mm and a plate thickness of 7-35 mm. With white cover and cover screws. Suitable for installation of standard rails (hat and support rails) for series terminals.• 8 entries of Ø 20 mm• 8 entries for NYM cables 3 x 1.5 mm²• 4 entries for data cables (extra-low voltage)According to IEC 60670-1, IEC 60670-22 and DIN 49073-1.

Junction box with entries, 114x114x57, Light grey, 7035, Polypropylene, PP

Junction box T 60, plug-in seal, flame-resistant. Junction box for the connection of cables and lines indoors and in protected outdoor areas. Square design with plug-in seals to the sides and knock-out entries in the bottom. Suitable for wall and ceiling mounting and on mounting panels. With the option to fasten inside and to mount via the corner domes. Cover with quick lock, sealable. Made from halogen-free materials. Flame-resistant type made from special polypropylene. Junction box according to DIN EN 60670. Flame-resistant to DIN EN 60695-2-11, test temperature 960 °C. Impact resistance IK07 according to DIN EN 50102.

Junction box with terminal strip + entries, Ø80x51, Light grey, 7035, Polypropylene, PP

Junction box T 25, plug-in seal, terminal strip. Junction box with terminal strip for the connection of cables and lines indoors and in protected outdoor areas. Round design with plug-in seals to the sides and knock-out entries in the bottom. Suitable for wall and ceiling mounting, on mounting panels and threads in the floor. With the option to fasten inside. With fixed clamping cover. Made from halogen-free and UV-resistant materials. Junction box according to DIN EN 60670. Flame-resistant to DIN EN 60695/2/11, test temperature 650 °C. Impact resistance IK07 according to DIN EN 50102.

Junction box with terminal strip + entries, 114x114x57, Light grey, 7035, Polypropylene, PP

T 60 KL junction box, with connection strip + cones 114x114x57 Polypropylene, PP,

T 60 junction box, insertable joint, terminal strip. Junction box with connection strip for connecting cables and lines in indoor and protected outdoor areas. Square shape with insertable joints on the sides and blind entrances into the floor. Suitable for wall and ceiling mounting, and mounting on sheet metal structures. With the possibility of interior fixing and assembly by means of corner domes. Lid with quick closure, sealable. Made with halogen-free and UV-resistant materials. Junction box according to DIN EN 60670. Anti-flammable according to DIN EN 60695-2-11, test temperature 650 °C. IK07 impact resistance according to DIN EN 50102.

Junction box with terminal strip + entries, 190x150x77, Light grey, 7035, Polypropylene, Glass-fibre reinforced, PP/GF

Junction box T 160, plug-in seal, terminal strip. Junction box with terminal strip for the connection of cables and lines indoors and in protected outdoor areas. Rectangular design with plug-in seals to the sides and knock-out entries in the bottom. Suitable for wall and ceiling mounting and on mounting panels. With the option to fasten inside and to mount via the corner domes. Cover with quick lock, sealable. Made from halogen-free and UV-resistant materials. Junction box according to DIN EN 60670. Flame-resistant to DIN EN 60695/2/11, test temperature 650 °C. Impact resistance IK05 according to DIN EN 50102.Terminal strips and mounting rail are not pre-installed

Junction box with terminal strip + entries, 285x201x120, Light grey, 7035, Polypropylene, Glass-fibre reinforced, PP/GF

T 350 KL junction box, with connection strip + cones 285x201x120 Polypropylene, reinforced with fiberglass, PP/GF,

T 350 junction box, insertable joint, terminal strip. Junction box with connection strip for connecting cables and lines in indoor and protected outdoor areas. Rectangular shape with insertable joints. Suitable for wall and ceiling mounting, mounting on sheet metal and threaded structures on the floor. With the possibility of interior fixing and assembly by means of corner domes. Lid with quick closure, sealable. Made with halogen-free and UV-resistant materials. Junction box according to DIN EN 60670. Anti-flammable according to DIN EN 60695-2-11, test temperature 650 °C. IK05 impact resistance according to DIN EN 50102.

Junction box with entries, 151x117x67, Pure white, 9010, Polypropylene, PP

Junction box T 100, plug-in seal. Junction box for the connection of cables and lines indoors and in protected outdoor areas. Rectangular design with plug-in seals to the sides and knock-out entries in the bottom. Suitable for wall and ceiling mounting and on mounting panels. With the option to fasten inside and to mount via the corner domes. Cover with quick lock, sealable. Made from halogen-free and UV-resistant materials. Junction box according to DIN EN 60670. Flame-resistant to DIN EN 60695/2/11, test temperature 650 °C. Impact resistance IK07 according to DIN EN 50102.

Junction box with entries, 240x190x95, Pure white, 9010, Polypropylene, Glass-fibre reinforced, PP/GF

Junction box T 250, plug-in seal. Junction box for the connection of cables and lines indoors and in protected outdoor areas. Rectangular design with plug-in seals to the sides and knock-out entries in the bottom. Suitable for wall and ceiling mounting, on mounting panels and threads in the floor. With the option to fasten inside and to mount via the corner domes. Cover with quick lock, sealable. Made from halogen-free and UV-resistant materials. Junction box according to DIN EN 60670. Flame-resistant to DIN EN 60695/2/11, test temperature 650 °C. Impact resistance IK05 according to DIN EN 50102.

Junction box with entries, red cover, 90x90x52, Red grey, Polypropylene, PP

Junction box T 40, plug-in seal. Junction box for the connection of cables indoors and in protected outdoor areas. Square design with plug-in seals to the sides and knock-out entries in the bottom. Suitable for wall and ceiling mounting and on mounting panels. With the option to fasten inside. With fixed clamping cover. Made from halogen-free, UV-resistant materials.Junction box according to DIN EN 60670. Flame-resistant to DIN EN 60695/2/11, test temperature 650 °C. Impact resistance IK07 according to DIN EN 50102.

Junction box with entries, red cover, 151x117x67, Red grey, Polypropylene, PP

Junction box T 100, plug-in seal. Junction box for the connection of cables and lines indoors and in protected outdoor areas. Rectangular design with plug-in seals to the sides and knock-out entries in the bottom. Suitable for wall and ceiling mounting and on mounting panels. With the option to fasten inside and to mount via the corner domes. Cover with quick lock, sealable. Made from halogen-free and UV-resistant materials. Junction box according to DIN EN 60670. Flame-resistant to DIN EN 60695/2/11, test temperature 650 °C. Impact resistance IK07 according to DIN EN 50102.

Junction box with entries, red cover, 240x190x95, Red grey, Polypropylene, Glass-fibre reinforced, PP/GF

T 250 RO-LGR junction box with cones, red lid 240x190x95 Grey/red Polypropylene, reinforced with glass fibres, PP/GF

Junction box without Wieland sockets,3-pole, 151x117x67, Light grey, 7035, Polypropylene, PP

Junction box T 100, without Wieland socket. Junction box for 6 Wieland sockets, 3-pin, for the connection of cables indoors and in protected outdoor areas. Rectangular design with knock-out entries to the sides and knock-out entries in the bottom. Suitable for wall and ceiling mounting and on mounting panels. With the option of fastening inside and to mount via the corner domes. Cover with quick lock, sealable. Made from halogen-free and UV-resistant materials. Junction box according to DIN EN 60670. Flame-resistant to DIN EN 60695/2/11, test temperature 650 °C. Clear internal dimensions: 136x102x57 mm

Junction box with Wieland sockets 3s3p, 151x117x67, Light grey, 7035, Polypropylene, PP

Junction box T 100, with Wieland socket 3s. Junction box with Wieland sockets, 2s3p, for the connection of cables indoors and in protected outdoor areas. Rectangular design with knock-out entries to the sides and knock-out entries in the bottom. Suitable for wall and ceiling mounting and on mounting panels. With the option of fastening inside and to mount via the corner domes. Cover with quick lock, sealable. Made from halogen-free and UV-resistant materials. Junction box according to DIN EN 60670. Flame-resistant to DIN EN 60695/2/11, test temperature 650 °C. Clear internal dimensions: 136x102x57 mm

Junction box with Wieland sockets 6s3p, 151x117x67, Light grey, 7035, Polypropylene, PP

Junction box T 100 WB, with Wieland socket 6s. Junction box with Wieland sockets, 2s3p, for the connection of cables indoors and in protected outdoor areas. Rectangular design with knock-out entries to the sides and knock-out entries in the bottom. Suitable for wall and ceiling mounting and on mounting panels. With the option of fastening inside and to mount via the corner domes. Cover with quick lock, sealable. Made from halogen-free and UV-resistant materials. Junction box according to DIN EN 60670. Flame-resistant to DIN EN 60695/2/11, test temperature 650 °C. Clear internal dimensions: 136x102x57 mm

Junction box Wieland connector 1S4+1B4+2B3, 151x117x67, Light grey, 7035, Polypropylene, PP

T100 WS 1S4 2S3C junction box with Wieland 1S4+1B4+2B3 sockets 150x116x67 Light grey, RAL 7035 Polypropylene, PP

Junction box T 100, with Wieland connector and socket 1S4+1B4+2B3. Junction box with Wieland connector 1S4+3B3 for the connection of cables and lines indoors and in protected outdoor areas. Rectangular design with knock-out entries to the sides and knock-out entries in the bottom. Suitable for wall and ceiling mounting and on mounting panels. With the option of fastening inside and to mount via the corner domes. Cover with quick lock, sealable. Made from halogen-free and UV-resistant materials. Junction box according to DIN EN 60670. Flame-resistant to DIN EN 60695/2/11, test temperature 650 °C. Clear internal dimensions: 136x102x57 mm

Mounting fastening plate incl. fastening screws, 205x155x2, Strip-galvanised, DIN EN 10147, Steel, St

Mounting and fastening plate T350. This mounting and fastening plate gives the options for variable fixing of external components in the junction box. It consists of strip-galvanised sheet steel of a material thickness of 2 mm.The appropriate fastening holes are drilled into the steel plate for the component that needs to be fixed. Then, the products can be attached onto the sheet with cable ties, screws or similar fastening materials.Using the screws included in the scope of the delivery, the mounting fastening plate can now be fixed in the appropriate T series (T 250) junction box.

Junction box with M20 entries, 90x90x52, Light grey, 7035, Polypropylene, PP

T 40 M20 junction box, with M20 inlets 90x90x52 Polypropylene, PP,

Cable junction box T40 with deflection entries

Aluminium empty housing , 64x58x36, Light grey, 7035, Powder-coated, Cast aluminium, AlG

Aluminium empty housing Mx06, powder coated. Robust aluminium empty housing for mechanical engineering and automation technology.The OBO Mx series’ excellent mechanical and thermal features make it most suitable for extreme demands in many different areas. It is therefore also best suited for applications in industry, ports and shipbuilding, as well as in the agricultural sector.The products protect the electrical installation against high-grade strains. They withstand both extreme cold and heat as well as vandalism and impact on roads, railways or in tunnels. With an IP66 protection class, they are optimally protected against the intrusion of dust and water. The aluminium housings are powder-coated (RAL 7001) and are delivered with a cover including stainless steel screws, a seal and tw

Aluminium empty housing , 150x100x80, Light grey, 7035, Powder-coated, Cast aluminium, AlG

Aluminium empty housing Mx16, powder coated. Robust aluminium empty housing for mechanical engineering and automation technology.The OBO Mx series’ excellent mechanical and thermal features make it most suitable for extreme demands in many different areas. It is therefore also best suited for applications in industry, ports and shipbuilding, as well as in the agricultural sector.The products protect the electrical installation against high-grade strains. They withstand both extreme cold and heat as well as vandalism and impact on roads, railways or in tunnels. With an IP66 protection class, they are optimally protected against the intrusion of dust and water. The aluminium housings are powder-coated (RAL 7001) and are delivered with a cover including stainless steel screws, a seal and tw

Aluminium empty housing , 175x80x57, Light grey, 7035, Powder-coated, Cast aluminium, AlG

Aluminium empty housing Mx17, powder coated. Robust aluminium empty housing for mechanical engineering and automation technology.The OBO Mx series’ excellent mechanical and thermal features make it most suitable for extreme demands in many different areas. It is therefore also best suited for applications in industry, ports and shipbuilding, as well as in the agricultural sector.The products protect the electrical installation against high-grade strains. They withstand both extreme cold and heat as well as vandalism and impact on roads, railways or in tunnels. With an IP66 protection class, they are optimally protected against the intrusion of dust and water. The aluminium housings are powder-coated (RAL 7001) and are delivered with a cover including stainless steel screws, a seal and tw

Aluminium empty housing , 360x160x90, Light grey, 7035, Powder-coated, Cast aluminium, AlG

Empty aluminum box Mx 361609 SGR, 360x160x91 Aluminum die-casting, AlG, electrostatically coated

Aluminium empty housing Mx36, powder coated. Robust aluminium empty housing for mechanical engineering and automation technology.The OBO Mx series’ excellent mechanical and thermal features make it most suitable for extreme demands in many different areas. It is therefore also best suited for applications in industry, ports and shipbuilding, as well as in the agricultural sector.The products protect the electrical installation against high-grade strains. They withstand both extreme cold and heat as well as vandalism and impact on roads, railways or in tunnels. With an IP66 protection class, they are optimally protected against the intrusion of dust and water. The aluminium housings are powder-coated (RAL 7001) and are delivered with a cover including stainless steel screws, a seal and tw

Junction box , 85x85x40, Pure white, 9010, Polyethylene, PE

Junction box A 11. Protection rating IP55, rated voltage 690 V, nominal cross-section 2.5 mm², 12 entries for cable diameters of 5‒14 mm.Clamshell.Dimensions: 85 x 85 x 40 mmClear internal dimensions: 75 x 75 x 35 mm1 cut-out tool for every 10 boxes

Box, empty concealed, Ø60mm, H40mm, Black, Polystyrene, PS

Box for UG 60 D mechanisms, recessed Ø60mm, H40mm Polystyrene, PS,

Recessed mechanism box

Device/connection plug concealed, 70x110x48, Black, Polystyrene, PS