6AG1132-4BB01-2AB0 SIEMENS SIPLUS ET 200S 2DO HF (1 PU 5 units) -25...+60°C based on 6ES7132-4BB01-0AB0 View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

6AG1132-4BB01-2AB0 SIEMENS SIPLUS ET 200S 2DO HF (1 PU 5 units) -25...+60°C based on 6ES7132-4BB01-0AB0

6AG1132-4BB01-2AB0

SIEMENS

SIPLUS ET 200S 2DO HF (1 PU=5 units) -25...+60°C based on 6ES7132-4BB01-0AB0

SIPLUS ET 200, 5 electronic modules for ET 200S, 2 SD, HF, temperature of work -25 to +60 ° C, based on 6ES7132-4BB01-0AB0, 5 pieces per packaging

More details


AUTOMATION SYSTEMS > SIPLUS Extreme (LOGO, S7-1200, S7-1500, etc)

* Brand new product in its original packaging covered by the warranties and certifications provided by SIEMENS

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

More info



ETIM: EC001599 - Fieldbus, decentr. periphery - digital I/O module

Value Unit
Supply voltage AC 60 Hz (EF007533) -V
Supply voltage AC 50 Hz (EF007532) -V
Performance level according to EN ISO 13849-1 (EF007399) -
Category according to EN 954-1 (EF006782) -
SIL according to IEC 61508 (EF009889) -
Supply voltage DC (EF007534) ['20.4', '28.8']V
Voltage type of supply voltage (EF002991) DC
Number of digital inputs (EF001992) 0
Number of digital outputs (EF001993) 2
Digital inputs configurable (EF008516) -
Digital outputs configurable (EF008520) true
Input current at signal 1 (EF001428) -mA
Permitted voltage at input (EF007554) ['-', '-']V
Type of voltage (input voltage) (EF003033) -
Type of digital output (EF003601) Other
Output current (EF003202) 0.5A
Permitted voltage at output (EF007553) ['17.4', '25.8']V
Type of output voltage (EF008222) DC
Short-circuit protection, outputs available (EF003203) true
Number of HW-interfaces industrial Ethernet (EF003020) 0
Number of interfaces PROFINET (EF006932) 0
Number of HW-interfaces RS-232 (EF003021) 0
Number of HW-interfaces RS-422 (EF003022) 0
Number of HW-interfaces RS-485 (EF003023) 0
Number of HW-interfaces serial TTY (EF003024) 0
Number of HW-interfaces parallel (EF003026) 0
Number of HW-interfaces Wireless (EF006933) 0
Number of HW-interfaces USB (EF003025) 0
Number of HW-interfaces other (EF003027) 0
With optical interface (EF003028) false
Supporting protocol for TCP/IP (EF003050) false
Supporting protocol for PROFIBUS (EF003052) false
Supporting protocol for CAN (EF003053) false
Supporting protocol for INTERBUS (EF003054) false
Supporting protocol for ASI (EF003051) false
Supporting protocol for KNX (EF003055) false
Supporting protocol for Modbus (EF003057) false
Supporting protocol for Data-Highway (EF003058) false
Supporting protocol for DeviceNet (EF003059) false
Supporting protocol for SUCONET (EF003060) false
Supporting protocol for LON (EF003017) false
Supporting protocol for PROFINET IO (EF007525) false
Supporting protocol for PROFINET CBA (EF007524) false
Supporting protocol for SERCOS (EF006657) false
Supporting protocol for Foundation Fieldbus (EF007522) false
Supporting protocol for EtherNet/IP (EF007521) false
Supporting protocol for AS-Interface Safety at Work (EF007519) false
Supporting protocol for DeviceNet Safety (EF007520) false
Supporting protocol for INTERBUS-Safety (EF006662) false
Supporting protocol for PROFIsafe (EF007526) false
Supporting protocol for SafetyBUS p (EF007527) false
Supporting protocol for other bus systems (EF003062) false
Radio standard Bluetooth (EF007178) false
Radio standard WLAN 802.11 (EF007179) false
Radio standard GPRS (EF008523) false
Radio standard GSM (EF008524) false
Radio standard UMTS (EF008525) false
IO link master (EF007298) false
System accessory (EF004118) true
Degree of protection (IP) (EF005474) IP20
Type of electric connection (EF003961) Screw-/spring clamp connection
Time delay at signal exchange (EF002382) ['0.4', '0.1']ms
Fieldbus connection over separate bus coupler possible (EF004002) true
Rail mounting possible (EF003972) true
Wall mounting/direct mounting (EF007020) true
Front build in possible (EF007016) true
Rack-assembly possible (EF007018) false
Suitable for safety functions (EF001597) false
Appendant operation agent (Ex ia) (EF004141) false
Appendant operation agent (Ex ib) (EF004142) false
Explosion safety category for gas (EF003997) ATEX gas-ex-protection, Cat. 3G
Explosion safety category for dust (EF003998) None
Width (EF000008) 15.0mm
Height (EF000040) 81.0mm
Depth (EF000049) 52.0mm


SIPLUS ET 200S 2DO HF (1 PU=5 units) -25...+60°C based on 6ES7132-4BB01-0AB0
Supply voltage
Reverse voltage protectionYes; when using the same load voltage as on the power module
Load voltage L+
● Rated value (DC)24 V; From power module
● Reverse polarity protectionYes; polarity reversal can lead to the digital outputs being connected through
Input current
from load voltage L+ (without load), max.5 mA; Per channel
from backplane bus 3.3 V DC, max.10 mA
Power loss
Power loss, typ.0.4 W
Address area
Address space per module
● Address space per module, max.1 byte
● with packing2 bit
Digital outputs
Type of digital outputTransistor
Number of digital outputs2
Short-circuit protectionYes
● Response threshold, typ.1.5 A
Limitation of inductive shutdown voltage to-55 to -60 V, typ. L+( )
Controlling a digital inputYes
Switching capacity of the outputs
● on lamp load, max.2.5 W
Load resistance range
● lower limit48 Ω
● upper limit3 400 Ω
Output voltage
● for signal "1", min.L+ (-1 V)
Output current
● for signal "1" rated value0.5 A
● for signal "1" permissible range, min.7 mA
● for signal "1" permissible range, max.600 mA
● for signal "0" residual current, max.0.3 mA
Output delay with resistive load
● "0" to "1", max.100 µs
● "1" to "0", max.400 µs
Parallel switching of two outputs
● for upratingNo
● for redundant control of a loadYes; per module
Switching frequency
● with resistive load, max.100 Hz
● with inductive load, max.2 Hz
● on lamp load, max.10 Hz
Total current of the outputs
● Current per module, max.1 A
Cable length
● shielded, max.1 000 m
● unshielded, max.600 m
Interrupts/diagnostics/status information
Diagnostics functionYes; Can be read out
Substitute values connectableYes; 0/1
Diagnoses
● Wire-breakYes; channel by channel
● Short-circuitYes; channel by channel
Diagnostics indication LED
● Group error SF (red)Yes
● Status indicator digital output (green)Yes
Parameter
Remark3 byte
Diagnostics wire breakDisable / enable
Diagnostics short-circuitDisable / enable
Response to CPU/master STOPSubstitute a value/keep last value
Potential separation
Potential separation digital outputs
● between the channelsNo
● between the channels and backplane busYes
Isolation
Isolation tested with500 V DC
Ambient conditions
Ambient temperature during operation
● min.-25 °C; = Tmin
● max.60 °C; = Tmax
Altitude during operation relating to sea level
● Installation altitude above sea level, max.5 000 m
● Ambient air temperature-barometric pressure-altitudeTmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)
Relative humidity
● With condensation, tested in accordance with IEC 60068-2-38, max.100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
Use in stationary industrial systems
— to biologically active substances according to EN 60721-3-3Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
— to chemically active substances according to EN 60721-3-3Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
— to mechanically active substances according to EN 60721-3-3Yes; Class 3S4 incl. sand, dust, *
Use on ships/at sea
— to biologically active substances according to EN 60721-3-6Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on request
— to chemically active substances according to EN 60721-3-6Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
— to mechanically active substances according to EN 60721-3-6Yes; Class 6S3 incl. sand, dust; *
Usage in industrial process technology
— Against chemically active substances acc. to EN 60654-4Yes; Class 3 (excluding trichlorethylene)
— Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)
Remark
— Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04* The supplied plug covers must remain in place over the unused interfaces during operation!
Dimensions
Width15 mm
Height81 mm
Depth52 mm
Weights
Weight, approx.40 g
last modified:08/29/2020


Product
Article Number (Market Facing Number)6AG1132-4BB01-2AB0
Product DescriptionSIPLUS ET 200S 2DO HF (1 PU=5 units) -25...+60°C based on 6ES7132-4BB01-0AB0
Product familySIPLUS ET 200S digital electronic modules
Product Lifecycle (PLM)PM300:Active Product
Price data
Price Group473
Surcharge for Raw MaterialsNone
Metal FactorNone
Delivery information
Export Control RegulationsAL : N / ECCN : EAR99H
Standard lead time ex-works37 Day/Days
Net Weight (kg)0,187 Kg
Product Dimensions (W x L x H)Not available
Packaging Dimension8,10 x 8,70 x 6,30
Package size unit of measureCM
Quantity Unit1 Package
Packaging Quantity5
Additional Product Information
EAN4042948363621
UPC040892596168
Commodity Code85389091
LKZ_FDB/ CatalogIDA&DSE/SIP ADD
Product Group4572
Group CodeR740
Country of originGermany
Compliance with the substance restrictions according to RoHS directiveSince: 01.01.2012
Product classB: return restricted, please contact your Siemens partner/contact
WEEE (2012/19/EU) Take-Back ObligationYes
REACH Art. 33 Duty to inform according to the current list of candidates

Information obligation imposed by Article 33, REACH Regulation: This product includes one or several articles in which the following substance of the candidate list is contained in concentrations higher than 0,1% weight by weight (w/w):

Lead

Based on the information currently available, we assume that these substances do not pose any risk if the articles are used as intended (including disposal). Please also refer to product documentation.

Classifications
VersionClassification
eClass627-24-26-04
eClass7.127-24-26-04
eClass827-24-26-04
eClass927-24-26-04
eClass9.127-24-26-04
ETIM4EC001599
ETIM5EC001599
ETIM6EC001599
ETIM7EC001599
IDEA43566
UNSPSC1532-15-17-05

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.