UM-32RM/KSR-G24/21/MS/PLC 2900891 PHOENIX CONTACT Active module View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

UM-32RM/KSR-G24/21/MS/PLC 2900891 PHOENIX CONTACT Active module

UM-32RM/KSR-G24/21/MS/PLC

2900891

PHOENIX_CONTACT

Active module

VARIOFACE output module, with 32 miniature relays, 1 changeover contact with lockable manual actuation each, plugged, for 24 V DC (incl. relay)

More details


INTERFACE Components (IF)

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

More info



Technical data

Product properties
Product typeInterface module
No. of channels32
Operating mode100% operating factor
Mechanical service life5x 106cycles
With componentsyes
Data management status
Article revision06
Insulation characteristics: Air and creepage distances, output/output
Overvoltage categoryIII
Pollution degree2

Electrical properties
Air and creepage distances, output/output
Rated insulation voltage260 V AC
Rated surge voltage4 kV (Basic insulation between output contact current paths)
6 kV (Safe isolation and reinforced insulation between input circuit and output contact paths)
Supported controller MITSUBISHI MELSEC Q
Suitable I/O cardQY82P
Supported controller MITSUBISHI MELSEC L
Suitable I/O cardLY41PT1P
LY42PT1P

Input data
Nominal input voltage UN24 V DC
Input voltage range in reference to UN0.9 ... 1.1 (observe derating)
Input voltage range21.6 V DC ... 26.4 V DC
Typical input current at UN18 mA
Typical response time9 ms
Typical release time6 ms
Protective circuitFree-wheeling diode (integrated in relay)
Operating voltage displayGreen LED
Status display/channelYellow LED (integrated in relay)

Output data
Switching
Contact switching type1 changeover contact
Type of switch contactSingle contact
Contact materialAgNi
Maximum switching voltage250 V AC/DC
Minimum switching voltage12 V AC/DC
Limiting continuous current5 A
Min. switching current10 mA
Interrupting rating (ohmic load) max.120 W (24 V DC)
62 W (48 V DC)
48 W (60 V DC)
55 W (110 V DC)
66 W (220 V DC)
1250 VA (250 V AC)

Connection data
Controller level
Connection methodIDC/FLK pin strip
Number of connections1
Number of positions50
Pitch2.54 mm
Field level
Connection methodScrew connection
Stripping length8 mm
Screw threadM3
Conductor cross section rigid0.2 mm² ... 4 mm²
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross section AWG24 ... 12
Supply
Connection methodScrew connection
Stripping length8 mm
Screw threadM3
Number of connections4
Conductor cross section rigid0.2 mm² ... 4 mm²
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross section AWG24 ... 12

Signaling
Status display presentYes

Dimensions
Width285.5 mm
Height112 mm
Depth62 mm

Material specifications
Colorgreen (RAL 6021)

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP00
Ambient temperature (operation)-20 °C ... 50 °C
Ambient temperature (storage/transport)-20 °C ... 70 °C

Standards and regulations
Air and creepage distances, output/output
Standards/regulationsDIN EN 50178
IEC 60664

Mounting
Mounting typeDIN rail mounting
Assembly notein rows with zero spacing
Mounting positionany

Notes
Notes on operationFor proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.