IBS ST 24 BK DIO 8/8/3-T 2752411 PHOENIX CONTACT INTERBUS-ST I/O bus terminal module, 8 digital inputs, 8 di.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

IBS ST 24 BK DIO 8/8/3-T 2752411 PHOENIX CONTACT INTERBUS-ST I/O bus terminal module, 8 digital inputs, 8 di..

IBS ST 24 BK DIO 8/8/3-T

2752411

PHOENIX_CONTACT

Available

Ship on today

INTERBUS-ST I/O bus terminal module, 8 digital inputs, 8 digital outputs, 500 mA, I/Os additionally available via FLK plug, IP20 protection, consisting of: Terminal part with screw connection and module electronics

More details


Programmable Logic Controllers Plcs

AUTOMATION Industrial Automation - PHOENIX CONTACT

I/O systems. Connectors - PHOENIX CONTACT

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

Quantity Price
1+671,59 €
2+664,94 €
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info



Product description

INTERBUS ST bus terminal modules with additional interfaces (I/O)

In addition to the actual bus terminal module functions, 8 digital inputs and 8 digital outputs are integrated into the INTERBUS input/output bus terminal modules. On top of this, the modules can be extended by up to four INTERBUS-ST input/output modules. All the bus terminal module functions, such as switching of the input/output modules from the INTERBUS network remain available without restrictions.

This bus terminal module is particularly suitable for use in applications for which very little space is available, or where only a few input/output points are required.

The IBS ST 24 BK DIO 8/8/3-T or -LK modules provide the option of assigning inputs and outputs either by screw terminal blocks in the termination block, or using an FLK system connector. This permits the ELR 319 electronic load relay or VARIOFACE input/output modules to be connected simply using 14-pos. FLK connectors.

The IBS ST 24 BK RB-T or IBS ST 24 BK RB-LK modules have an additional remote bus branch. This remote bus branch has the same restrictions regarding structure as any remote bus. All devices with remote bus interface can be linked in here.

All INTERBUS bus terminal modules make it possible to individually ebnable/disable the additional bus interfaces. To some extent, they perform the role of two bus terminal modules in the INTERBUS system and are also treated as such in the address lists and configuring software (CMD).

Note: When configuring buses branching off from the bus terminal modules, please observe the topology supported by INTERBUS controller boards.

Dimensions

Width118 mm
Height117 mm
Depth116 mm

Ambient conditions

Ambient temperature (operation)0 °C ... 55 °C
Ambient temperature (storage/transport)-25 °C ... 70 °C
Permissible humidity (operation)75 % (on average, 85% infrequently, non-condensing)
Permissible humidity (storage/transport)75 % (on average, 85% infrequently, non-condensing)
Air pressure (operation)80 kPa ... 106 kPa (up to 2000 m above mean sea level)
Air pressure (storage/transport)80 kPa ... 106 kPa (up to 2000 m above mean sea level)
Degree of protectionIP20

Interfaces

Fieldbus systemINTERBUS
DesignationINTERBUS
Connection method9-pos. D-SUB plug/socket
Designation connection pointIncoming/Outgoing Remote Bus
Number of positions9
Fieldbus systemLokalbus
DesignationST local bus
Connection methodST local bus connector
Transmission speed500 kBit/s

Digital inputs

Input nameDigital inputs
Connection methodScrew-cage terminal blocks or FLK connectors
3-conductor
Number of inputs8
Typical response time≥ 1 ms (typical)
Protective circuitOverload protection Fuse in header
Input voltage24 V DC
Input voltage range "0" signal-30 V DC ... 5 V DC
Input voltage range "1" signal13 V DC ... 30 V DC
Nominal input current at UINtyp. 5 mA (per channel)

Digital outputs

Output nameDigital outputs
Connection methodScrew-cage terminal blocks or FLK connectors
3-conductor
Number of outputs8
Protective circuitShort-circuit protection Electronic
Maximum output current per channel500 mA
Maximum output current per module / terminal block4 A
Maximum output current per group2 A

Power supply for module electronics

Supply voltage24 V DC
Supply voltage range18.5 V DC ... 30.5 V DC (including ripple)
Ripple3.6 Vpp within the allowable voltage range
Current consumptiontyp. 150 mA

General

Net weight690 g
Mounting typeDIN rail

Datasheet - PDF

Title: Language: Size: Type:
PHOENIX CONTACT-2752411-IBS ST 24 BK DIO 8/8/3-T English 138 Kbytes PHOENIX CONTACT-2752411-IBS ST 24 BK DIO 8/8/3-T

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review