FLS PB M12 DO 8 M12-2A 2736110 PHOENIX CONTACT Distributed I/O device View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

FLS PB M12 DO 8 M12-2A 2736110 PHOENIX CONTACT Distributed I/O device

FLS PB M12 DO 8 M12-2A

2736110

PHOENIX_CONTACT

Distributed I/O device

More details


I/O

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

More info



Key Commercial Data

Orderkey2736110
Packing unit1 pc
Catalog pagePage 236 (C-6-2017)
GTIN4017918899578
Weight per Piece (excluding packing)337.740 g
Custom tariff number85389099
Country of originDE (Germany)

Note

Utilization restriction1

Dimensions

Dimensional drawing
Width60 mm
Height178 mm
Depth49.3 mm
Drill hole spacing168 mm

Ambient conditions

Ambient temperature (operation)-25 °C ... 60 °C
Ambient temperature (storage/transport)-25 °C ... 85 °C
Permissible humidity (storage/transport)95 %
Air pressure (operation)80 kPa ... 106 kPa (up to 2000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protectionIP65/IP67

General

Mounting typeWall mounting
Net weight337.74 g

Interfaces

DesignationPROFIBUS DP
Connection method2x M12 connectors, B-coded
Designation connection pointCopper cable
Transmission speed9.6 kbps ... 12 Mbps (Automatic baud rate detection)
Transmission physicsPROFIBUS-DP-compliant copper cable
Address area assignment1 ... 99, can be set
Number of positions5

Power supply for module electronics

Connection methodM12 connector, (A-coded)
DesignationUL
Supply voltage24 V DC
Supply voltage range18 V DC ... 30 V DC (including ripple)

Fieldline potentials

Voltage supply UL24 V DC
Power supply at UL4 A
Current consumption from ULtyp. 40 mA
max. 100 mA
Voltage supply US24 V DC
Power supply at USmax. 4 A
Current consumption from UStyp. 3 mA
max. 700 mA
Voltage supply UA1124 V DC
Power supply at UA11max. 4 A
Current consumption at UA11typ. 12 mA (plus actuator current)
max. 4 A
Voltage supply UA1224 V DC
Power supply at UA12max. 4 A
Current consumption at UA12typ. 12 mA (plus actuator current)
max. 4 A
Voltage supply UA2124 V DC
Power supply at UA21max. 4 A
Current consumption at UA21typ. 12 mA (plus actuator current)
max. 4 A
Voltage supply UA2224 V DC
Power supply at UA22max. 4 A
Current consumption at UA22typ. 12 mA (plus actuator current)
max. 4 A

Digital outputs

Output nameDigital outputs
Connection methodM12 connector
Connection technology2, 3-wire
Number of outputs8
Type of protectionShort-circuit protection
Output voltage24 V DC
Maximum output current per channel2 A

Electrical isolation

Test section24 V supply (bus logics) / Bus connection
24 V supply (bus logics) / FE 500 V AC 50 Hz 1 min.
24 V supply (bus logics) / Digital outputs (actuator supply) 500 V AC 50 Hz 1 min.
Bus connection / FE 500 V AC 50 Hz 1 min.
Bus connection / Digital outputs (actuator supply) 500 V AC 50 Hz 1 min.
FE / Digital outputs (actuator supply) 500 V AC 50 Hz 1 min.

Standards and Regulations

Connection in acc. with standardCUL
Protection classIII, IEC 61140, EN 61140, VDE 0140-1

Environmental Product Compliance

China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Classifications

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.