DEK-OE-230AC/ 48DC/100/SO 46 2964678 PHOENIX CONTACT Solid-state relay interface designed to prevent interfe.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

DEK-OE-230AC/ 48DC/100/SO 46 2964678 PHOENIX CONTACT Solid-state relay interface designed to prevent interfe..

DEK-OE-230AC/ 48DC/100/SO 46





Ship on today

Solid-state relay interface designed to prevent interference on the control side, input: 230 V AC, output: 48 V DC/100 mA

More details

Programmable Logic Controllers Plcs

INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

INTERFACE Industrial Relays

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

10+35,39 €
20+35,13 €
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info


Width6.2 mm
Height80 mm
Depth56 mm

Ambient conditions

Ambient temperature (operation)0 °C ... 50 °C
Ambient temperature (storage/transport)0 °C ... 70 °C

Input data

Nominal input voltage UN230 V AC
Input voltage range in reference to UN0.9 ... 1.1
Switching threshold "0" signal, voltage≤ 92 V AC
Switching threshold "1" signal voltage> 207 V AC
Typical input current at UN2.5 mA
Typical response time4.4 ms
Typical turn-off time14 ms
Operating voltage displayYellow LED
Type of protectionSurge protection
RC element
Protective circuit/componentVaristor
RC element
Transmission frequency5 Hz

Output data

Output voltage range3 V DC ... 48 V DC
Limiting continuous current100 mA
Voltage drop at max. limiting continuous current≤ 0.9 V
Output circuit3-conductor, ground-referenced
Type of protectionProtection against polarity reversal
Free running
Protective circuit/componentPolarity protection diode
Damping diode

Connection data, input side

Connection nameInput side
Connection methodScrew connection
Stripping length8 mm
Screw threadM3
Conductor cross section solid0.2 mm² ... 2.5 mm²
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross section AWG24 ... 12
Torque0.5 Nm


Test voltage input/output2.5 kV AC
2.5 kV AC
Mounting positionany
Assembly instructionsIn rows with zero spacing
Operating mode100% operating factor
Standards/regulationsIEC 60664
EN 50178
IEC 62103
Rated surge voltage/insulationBasic insulation
Pollution degree2
Overvoltage categoryIII

Datasheet - PDF

PHOENIX CONTACT-2964678-DEK-OE-230AC/ 48DC/100/SO 46English109 KbytesPHOENIX CONTACT-2964678-DEK-OE-230AC/ 48DC/100/SO 46

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review