SM-7ES1N8A8L34SX 1242750 PHOENIX CONTACT Cable connector, straight, SPEEDCON, M40, number of poles: 4+3+PE, .. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

SM-7ES1N8A8L34SX 1242750 PHOENIX CONTACT Cable connector, straight, SPEEDCON, M40, number of poles: 4+3+PE, ..

SM-7ES1N8A8L34SX

1242750

PHOENIX_CONTACT

Cable connector, straight, SPEEDCON, M40, number of poles: 4+3+PE, contact type: Female, shielded: yes, protection rating: IP67, cable diameter range: 20.5 mm ... 26.5 mm, number of poles: 8, connection type: Crimped connection, series: SM, The article does not contain lead according to the RoHS II directive without the exception 6c (Pb< 0.1%)

More details


Home > PHOENIX CONTACT

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

Total price: $123.14
Unit price: $123.14

Quantity Price
1+$123.14
3+$109.71
6+$99.69
8+$96.69
11+$94.41
*This price is per unit and is the net value (not including taxes if applicable).

If our price is not the best, please ask us for a quote. Ask for a quotation

Related products

More info



Technical data

Notes
GeneralCrimped contacts 4 x Ø 2 mm, 4 x Ø 3.6 mm must be ordered separately
Safety Indication
Safety NotesWARNING: Connectors should not be plugged in or unplugged under load. Failure to comply and improper use can result in property damage and personal injury.
• WARNING: Serve only products in perfect condition. Products should be checked regularly for damage. Remove defective products immediately. Replace damaged products. It is not possible to repair them.
• WARNING: only qualified personnel specialized in electrical engineering can install and use the product, always taking into account the following safety indications. Specialized personnel must be familiar with the fundamentals of electrical engineering. You must be able to identify and avoid hazards. The corresponding symbol on the packaging indicates that personnel specialized in electrical engineering are required for installation and operation.
• The products are suitable for the areas of application of the construction of electrical equipment, control systems and systems.
• If connectors are used outdoors, they must be protected in particular from environmental influences.
• Ready-made products may not be tampered with or opened in an unauthorized manner.
• Use only mating connectors that comply with the technical data of the specified standards (e.g. those indicated on the product accessories on the website on phoenixcontact.com/products).
• The user is responsible for using the product directly in conjunction with products from other manufacturers.
• With operating voltages > 50 V AC, electrically conductive connector housings must be grounded
• Check that the functional or protective ground is properly connected.
• When grouping several electrical circuits together in one cable and/or connector, VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 apply
• Only use the tool recommended by Phoenix Contact
• Please note the Design In assembly/documentation instructions in the download area of the product website on phoenixcontact.com/products.
• Use connectors only fully plugged in and locked.
• When laying the cable, check that the tensile load applied to the connectors does not exceed the limits set out in the standards.
• Respect the minimum bending radius of the cable. Lay the cord without forcing it.
• The connector heats up during normal operation. Depending on the ambient conditions, the surface of the connector may also heat up. In this case, the user will be responsible for affixing the warning indications (e.g. DIN EN ISO 13732-1:2008-12).

assembly
Connection typeCrimp connection

Item Properties
Product TypeCircular connector (cable side)
Number of poles8
Plug Face4+3+PE
applicationPower
SeriesSM
ShieldedYes
CodificationN
Thread TypeM40

Material Data
Gasket materialFPM
Housing MaterialRotating Parts: Copper-Zinc Alloy (CuZn), Aluminum (Al), Pressed Castings: Zinc (GD-Zn)
Insulation materialAP 6.6
Material of sealing ring and O-ringFPM
Shell materialMetal

Connection data
Connecting Conductors
Connection typeCrimp connection

Electrical Properties
Contact
Contact Diameter3.6 mm
Maximum Current70 A
Nominal voltage UN630 V
Surge CategoryIii
Degree of pollution3
Dimensioning Transient Voltage6 kV
Contact
Contact Diameter2 mm
Maximum Current30 A
Nominal voltage UN250 V
Surge CategoryIii
Degree of pollution3
Dimensioning Transient Voltage4 kV

Connectors
Constructionstraight
Connection 1
Header constructionFemale Connection

Cable/Line
Cable Outer Diameter20.5 mm ... 26.5 mm

Environmental and life-life conditions
Environmental conditions
Protection IndexIP67
Ambient Temperature (Service)-40 °C ... 125 °C
Altitude3000 m

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.