PSR-SCP- 24DC/ESD/5X1/1X2/300 2981428 PHOENIX CONTACT Safety relay for emergency stop and safety door monito.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

PSR-SCP- 24DC/ESD/5X1/1X2/300 2981428 PHOENIX CONTACT Safety relay for emergency stop and safety door monito..

PSR-SCP- 24DC/ESD/5X1/1X2/300

2981428

PHOENIX_CONTACT

Available Ship on today

Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e according to EN ISO 13849, one or two-channel operation, automatic or manual activation, 3 N/O contact, 1 N/C contact, 2 N/O contacts with dropout delay of 0.2 to 300 s

More details


Programmable Logic Controllers Plcs

INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

Relays and security module and speed control. Safety - PHOENIX CONTACT

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

Quantity Price
1+$409.60
2+$397.56
3+$391.79
4+$390.58
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info



Dimensions

Width45 mm
Height99 mm
Depth114.5 mm

Ambient conditions

Ambient temperature (operation)-20 °C ... 55 °C (observe derating)
Ambient temperature (storage/transport)-40 °C ... 70 °C
Max. permissible relative humidity (operation)75 % (on average, 85% infrequently, non-condensing)
Max. permissible humidity (storage/transport)75 % (on average, 85% infrequently, non-condensing)
Shock15g
Vibration (operation)10 Hz ...150 Hz, 2g
Maximum altitude≤ 2000 m (Above sea level)

Input data

Rated control circuit supply voltage US24 V DC -15 % / +10 %
Power consumption at UStyp. 3.72 W
Rated control supply current IStyp. 155 mA
Typical inrush current200 mA ()
Current consumption< 40 mA (with Us/Ix to S10)
< 50 mA (with Us/Ix to S12)
> -40 mA (with Us/Ix to S22)
0 mA (with Us/Ix to S34)
< 5 mA (with Us/Ix to S35)
Voltage at input/start and feedback circuit24 V DC -15 % / +10 %
Typical response time< 600 ms (automatic start)
< 70 ms (manual start)
Typical pick-up time< 600 ms (when controlled via A1)
Typical release time< 20 ms (when controlled via S11/S12 and S21/S22)
< 20 ms (when controlled via A1)
Concurrence input 1/2
Recovery time< 1 s
Status display4 x green LEDs
Maximum switching frequency0.5 Hz
Max. permissible overall conductor resistanceapprox. 22 Ω (Input and start circuits at US)
Filter time1 ms (at A1 in the event of voltage dips at Us)
max. 1.5 ms (at S10, S12; test pulse width)
7.5 ms ()
Test pulse rate = 5 x Test pulse width

Output data

Contact type3 enabling current paths undelayed
2 enabling current paths delayed
1 signaling current path undelayed
Contact materialAgSnO2
Minimum switching voltage15 V AC/DC
Maximum switching voltage250 V AC/DC
Limiting continuous current6 A (N/O contact)
3 A (N/C contact)
Inrush current, minimum25 mA
Maximum inrush current6 A
Sq. Total current55 A2 (see to derating)
Interrupting rating (ohmic load) max.144 W (24 V DC, τ = 0 ms)
288 W (48 V DC, τ = 0 ms)
77 W (110 V DC, τ = 0 ms)
88 W (220 V DC, τ = 0 ms)
1500 VA (250 V AC, τ = 0 ms)
Maximum interrupting rating (inductive load)42 W (24 V DC, τ = 40 ms)
40 W (48 V DC, τ = 40 ms)
35 W (110 V DC, τ = 40 ms)
33 W (220 V DC, τ = 40 ms)
Switching capacity min.0.4 W
Output fuse10 A gL/gG (N/O contact (undelayed))
10 A gL/gG (N/O contact (delayed))
6 A gL/gG (N/C contact)

General

Relay typeElectromechanical relay with forcibly guided contacts in accordance with EN 50205
Mechanical service life10 x 106 cycles
Net weight460 g
Mounting typeDIN rail mounting
Degree of protectionIP54
IP20
Min. degree of protection of inst. locationIP54
Mounting positionany
Controlone and two channel
Parameters as per EN ISO 138494 (undelayed contacts)
3 (delayed contacts)
Stop category0 (undelayed contacts)
1 (delayed contacts)
Parameters for IEC 615083
Housing materialPBT

Connection data

Connection methodScrew connection
pluggableYes
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.2.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.12
Stripping length7 mm
Screw threadM3

Datasheet - PDF

Title: Language: Size: Type:
PHOENIX CONTACT-2981428-PSR-SCP- 24DC/ESD/5X1/1X2/300 English 143 Kbytes PHOENIX CONTACT-2981428-PSR-SCP- 24DC/ESD/5X1/1X2/300

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

Últimas Opiniones de Nuestros Clientes

Todas las valoraciones que recibimos de los artículos que ofrecemos son reales y están verificadas. Un pequeño gesto, pero de mucho valor. Por eso, te agradecemos ese minuto que inviertes en dejarnos tu opinión y calificación sobre los productos, porque nos ayuda a seguir mejorando y a ofrecerte un servicio de todavía mayor calidad.