Product successfully added to your shopping cart
PSR-SCP-230AC/ESAM2/3X1/1X2/B
2901430
PHOENIX_CONTACT
1
Safety relays
Safety
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Orderkey | 2901430 |
---|---|
Packing unit | 1 pc |
Catalog page | Page 260 (C-6-2017) |
GTIN | 4046356592185 |
Weight per Piece (excluding packing) | 23.000 g |
Custom tariff number | 85371098 |
Country of origin | DE (Germany) |
Ambient temperature (operation) | -25 °C ... 55 °C |
---|---|
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
Maximum altitude | ≤ 2000 m (Above sea level) |
Rated control circuit supply voltage US | |
---|---|
Nominal input voltage UN | 230 V AC |
Input voltage range in reference to UN | 0.85 ... 1.1 |
Typical input current at UN | 22 mA |
Voltage at input/start and feedback circuit | ~ 24 V DC |
Typical response time | 50 ms (manual start) |
300 ms (automatic start) | |
Typ. starting time with Us | 300 ms (when controlled via A1 or S11/S12) |
Typical release time | 20 ms (when controlled via S11/S12) |
150 ms (when controlled via A1) | |
Recovery time | 1 s |
Operating voltage display | Green LED |
Status display | 2 x green LEDs |
Protective circuit | Surge protection Suppressor diode |
Surge protection Varistor | |
Maximum switching frequency | 0.5 Hz |
Max. permissible overall conductor resistance | 50 Ω |
Contact type | 3 enabling current paths |
---|---|
1 signaling current path | |
Contact material | AgSnO2, gold-flashed |
Maximum switching voltage | 250 V AC/DC |
Minimum switching voltage | 10 V AC/DC |
Limiting continuous current | 6 A (N/O contact) |
5 A (N/C contact) | |
Maximum inrush current | 6 A |
Inrush current, minimum | 10 mA |
Sq. Total current | 72 A2(ITH2= I12+ I22+ I32) |
Interrupting rating (ohmic load) max. | 144 W (at 24 V DC) |
230 W (at 48 V DC) | |
68 W (at 110 V DC) | |
88 W (at 220 V DC) | |
2000 VA (for 250 V AC) | |
Maximum interrupting rating (inductive load) | 48 W (at 24 V DC) |
40 W (at 48 V DC) | |
35 W (at 110 V DC) | |
33 W (at 220 V DC) | |
Switching capacity min. | 100 mW |
Mechanical service life | approx. 107cycles |
Switching capacity (360/h cycles) | 6 A (24 V DC) |
5 A (230 V AC) | |
Output fuse | 10 A gL/gG NEOZED (Enabling current paths) |
6 A gL/gG NEOZED (Signaling current paths) |
Relay type | Electromechanical relay with forcibly guided contacts in accordance with EN 50205 |
---|---|
Nominal operating mode | 100% operating factor |
Net weight | 23 g |
Mounting position | any |
Mounting type | DIN rail mounting |
Degree of protection | IP20 |
IP54 | |
Min. degree of protection of inst. location | IP54 |
Connection method | Screw connection |
---|---|
pluggable | Yes |
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 12 |
Stripping length | 7 mm |
Screw thread | M3 |
Stop category | 0 |
---|---|
Safety Integrity Level (SIL) | 1 (up to SIL 3 depending on the application) |
1 (up to SIL 3 depending on the application) | |
Designation | EN ISO 13849 |
Performance level (PL) | c (up to PL e depending on the application) |
Category | 1 (up to Cat. 4 depending on the application) |
Safety Integrity Level Claim Limit (SIL CL) | 1 (up to SILCL 3 depending on the application) |
Designation | Air clearances and creepage distances between the power circuits |
---|---|
Standards/regulations | DIN EN 50178/VDE 0160 |
Rated insulation voltage | 250 V AC |
Rated surge voltage/insulation | 4 kV / basic insulation (safe isolation, reinforced insulation, and 6 kV between A1-A2/logic/enabling and signaling current paths) |
Degree of pollution | 2 |
Overvoltage category | III |
Shock | 15g |
Vibration (operation) | 10 Hz ... 150 Hz, 2g |
China RoHS | Environmentally Friendly Use Period = 50 |
---|---|
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX AUTOMATION EN.pdf | 35 Mbytes | |
PHOENIX CONTACT-2901430-PSR-SCP-230AC/ESAM2/3X1/1X2/B | 137 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.