SAC-5P-M12MS/45,0-PUR SH 1075309 PHOENIX CONTACT Sensor/actuator cable, 5-position, PUR halogen-free, black-.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

SAC-5P-M12MS/45,0-PUR SH 1075309 PHOENIX CONTACT Sensor/actuator cable, 5-position, PUR halogen-free, black-..

SAC-5P-M12MS/45,0-PUR SH

1075309

PHOENIX_CONTACT

8

Sensor/actuator cable, 5-position, PUR halogen-free, black-gray RAL 7021, shielded, Plug straight M12, A-coded, on free cable end, cable length: 45 m

Sensor/actuator cable, 5-pole, halogen-free PUR, greyish black RAL 7021, shielded, M12 straight male connector, coding: A, to free cable end, cable length: 45 m

More details


Sensors > Sensor-actuator patch cord

Industrial Field Connectivity (IFC)

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

More info



Key Commercial Data

Orderkey1075309
Packing unit1
GTIN4055626780061
Custom tariff number85444290

Drawings



Diagram

Diagram

Dimensional drawing

Dimensional drawing
Plug, M12 x 1, straight, shielded



Circuit diagram

Circuit diagram
Contact assignment of the M12 plug

Schematic diagram

Schematic diagram
Pin assignment M12 male connector, 5-pos., A-coded, male side



Cable cross section

Cable cross section
PUR halogen-free black [PUR]

Back to top

Dimensions

Length of cable45 m
Back to top

General

Rated current at 40°C4 A
Rated voltage48 V AC
60 V DC
Number of positions5
Insulation resistance≥ 100 MΩ
CodingA - standard
Standards/regulationsM12 connector IEC 61076-2-101
Status displayNo
Protective circuit/componentunwired
Overvoltage categoryII
Degree of pollution3
Insertion/withdrawal cycles≥ 100
Torque0.4 Nm (M12 connector)
Back to top

Material

Flammability rating according to UL 94HB
Contact materialCuSn
Contact surface materialNi/Au
Contact carrier materialTPU GF
Material of grip bodyTPU, hardly inflammable, self-extinguishing
Material, knurlsZinc die-cast, nickel-plated
Sealing materialNBR
Back to top

Standards and Regulations

Standards/specificationsM12 connector IEC 61076-2-101
Flammability rating according to UL 94HB
Back to top

Cable

Cable typePUR halogen-free black
Cable type (abbreviation)PUR
Cable abbreviationLiF9YC11Y
UL AWM style20549 / 10493 (80°C/300 V)
Conductor cross section5x 0.34 mm² (Signal line)
AWG signal line22
Conductor structure signal line42x 0.10 mm
Core diameter including insulation1.27 mm ±0.02 mm (Signal line)
Thickness, insulation≥ 0.21 mm
Wire colorsBrown, white, blue, black, gray
Overall twist5 wires around filler to the core
ShieldingTinned copper braided shield
Optical shield covering80 %
External sheath, colorblack-gray RAL 7021
Outer sheath thicknessapprox. 0.5 mm
External cable diameter D5.25 mm ±0.2 mm
Smallest bending radius, fixed installation26 mm
Smallest bending radius, movable installation52 mm (up to +60°C)
Number of bending cycles10000000
Bending radius52 mm
Traversing path10 m
Traversing rate3 m/s
Acceleration10 m/s²
Cable weight43 kg/km
Outer sheath, materialPUR
Material conductor insulationPP
Conductor materialBare Cu litz wires
Insulation resistance70 GΩ*km (at 20 °C)
Conductor resistancemax. 57 Ω/km (at 20 °C)
Nominal voltage, cable300 V (at 20 °C)
Test voltage Core/Core3000 V (at 20 °C)
Special propertiesFlexible cable conduit capable
Silicone-free
Free of substances which would hinder coating with paint or varnish
Low adhesion surface
Flame resistancein accordance with UL 758/1581 FT2
DIN EN 60332-2-2 (20 s)
Halogen-freein accordance with DIN VDE 0472 part 815
in accordance with DIN EN 50267-2-1
Resistance to oilin accordance with DIN EN 60811-2-1
Other resistanceHighly resistant to acids, alkaline solutions and solvents
hydrolysis and microbe resistant
Resistant to salt water
partly UV-resistant in accordance with DIN EN ISO 4892-2-A
abrasion-resistant
Ambient temperature (operation)-40 °C ... 80 °C (cable, fixed installation)
-25 °C ... 80 °C (cable, flexible installation)
Back to top

Classifications

eCl@ss

eCl@ss 6.027279200
eCl@ss 7.027279218
eCl@ss 8.027279218
eCl@ss 9.027060311
Back to top

ETIM

ETIM 5.0EC001855
ETIM 6.0EC001855
ETIM 7.0EC001855
Back to top

Datasheet - PDF

Title: Size: Type:
PDF CATALOG PHOENIX CONNECTORS EN.pdf 57 Mbytes

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.