Product successfully added to your shopping cart
SACB-4/T-L-8FUSE CT AXL
1413929
PHOENIX_CONTACT
1
Power distributor
Sensors > Passive sensor-actuator interface (with cable)
QUICKON Installation System (QPD)
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Orderkey | 1413929 |
---|---|
Packing unit | 1 pc |
Note | Made to Order (non-returnable) |
Catalog page | Page 303 (C-2-2017) |
GTIN | 4055626025476 |
Weight per Piece (excluding packing) | 556.500 g |
Custom tariff number | 85444290 |
Country of origin | DE (Germany) |
Rated voltage | 24 V DC |
---|---|
Max. operating voltage Umax | 30.5 V DC |
Current carrying capacity per I/O signal | 10 A |
Current carrying capacity per slot | 2x 9.25 A (at 40 °C) |
Total rated current | 70 A (at 40°C, observe the distribution of the current paths under load) |
Protective circuit | Overload protection for the outputs Fuse in header |
Number of positions | 4 |
Number of slots | 4 |
Flammability rating according to UL 94 | V0 |
Sensor/actuator connection system | M12-SPEEDCON-socket |
Degree of protection | IP66 |
---|---|
IP67 | |
Ambient temperature (operation) | -25 °C ... 60 °C |
Ambient temperature (storage/transport) | -25 °C ... 80 °C |
Local diagnostics | Supply voltage per module Green LED |
---|---|
Status display I/O Yellow LED |
Connection method | Plug-in master cable connection |
---|---|
Conductor cross section min. (energy) | 2.5 mm² |
Conductor cross section max. (energy) | 6 mm² |
Conductor cross section AWG min. (energy) | 14 |
Conductor cross section AWG max. (energy) | 10 |
External cable diameter min. | 9 mm |
External cable diameter max. | 15.5 mm |
Tightening torque, cover screw | 0.6 Nm |
Tightening torque, union nut | 5 Nm |
Tightening torque slot sensor/actuator cable | 0.4 Nm |
Housing material | PBT |
---|---|
Material of the moulding mass | PUR |
Contact material | Cu alloy |
Contact surface material | pre-nickel plated, gold-plated |
Contact carrier material | PA |
Material of contact, master cable side | CU alloy |
Material of contact surface, master cable side | Silver-plated |
Material of the contact carrier on the master cable side | PC |
Material of threaded sleeve | Zinc die-cast |
Material of threaded sleeve surface | Nickel-plated |
Sealing material | Viton (M12 socket) |
NBR (Master cable side) |
Standard designation | M12 connector |
---|---|
Standards/regulations | IEC 61076-2-111 |
Standard designation | Shock, vibration |
Standards/regulations | EN 60068-2-6 |
EN 60068-2-27 | |
EN 60068-2-64 | |
Flammability rating according to UL 94 | V0 |
China RoHS | Environmentally friendly use period: unlimited = EFUP-e |
---|---|
No hazardous substances above threshold values |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX CONNECTORS EN.pdf | 57 Mbytes | |
PHOENIX CONTACT-1413929-SACB-4/T-L-8FUSE CT AXL | 137 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.