Product successfully added to your shopping cart
PT 2-PE/S-230AC/FM
2858357
PHOENIX_CONTACT
1
Type 3 surge protection device
Pluggable type 3 arrester (device protection) for single-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE) with remote indication contact.
Home > PHOENIX CONTACT
Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
| Product type | Device protection |
| IEC power supply system | TT |
| TN-S | |
| Type | DIN rail module, two-section, divisible |
| Number of positions | 2 |
| Surge protection fault message | Optical, remote indicator contact |
| Insulation characteristics | |
| Overvoltage category | III |
| Pollution degree | 2 |
| Arrester can be tested with CHECKMASTER from software version: | From SW rev. 1.00 |
| IEC test classification | III |
| T3 | |
| EN type | T3 |
| Indicator/remote signaling | |
| Connection name | Remote fault indicator contact |
| Switching function | N/C contact |
| Maximum operating voltage Umax.AC | 250 V |
| Max. operating current Imax | 3 A AC |
| Connection method | Screw connection |
| Screw thread | M3 |
| Tightening torque, min | 0.8 Nm |
| Conductor cross section flexible min. | 0.2 mm² |
| Conductor cross section flexible max. | 2.5 mm² |
| Conductor cross section, rigid min. | 0.2 mm² |
| Conductor cross section, rigid max. | 4 mm² |
| Dimensional drawing | ![]() |
| Width | 17.7 mm |
| Height | 90 mm |
| Depth | 65.5 mm |
| Horizontal pitch | 1 Div. |
| Complete module width | 17.7 mm |
| Complete module height | 90 mm |
| Complete module depth | 65.5 mm |
| Flammability rating according to UL 94 | V-0 |
| Housing material | PA 6.6 |
| Direction of action | 1L-N & N-PE |
| Nominal frequency fN | 50 Hz |
| 60 Hz | |
| Maximum continuous voltage UC | 253 V AC |
| Rated load current IL | 26 A (30 °C) |
| Residual current IPE | ≤ 2.5 µA |
| Standby power consumption PC | ≤ 350 mVA |
| Nominal discharge current In(8/20) µs | 3 kA |
| 3 kA (in acc. with UL 1449) | |
| Nominal discharge current In(8/20) µs (L-N) | 3 kA |
| Nominal discharge current In(8/20) µs (L-PE) | 3 kA |
| Voltage protection level Up(L-N) | ≤ 1.1 kV |
| Voltage protection level Up(L-PE) | ≤ 1.5 kV |
| ≤ 600 V (asymmetrical (PE) static) | |
| Voltage protection level Up(N-PE) | ≤ 1.5 kV |
| ≤ 600 V (asymmetrical (PE) static) | |
| Residual voltage at In | ≤ 1.1 kV |
| ≤ 600 V | |
| ≤ 600 V | |
| Response time tA(L-N) | ≤ 25 ns |
| Response time tA(L-PE) | ≤ 100 ns |
| Max. required back-up fuse | 25 A (gL) |
| 25 A (MCB 25 A B/C) | |
| Short-circuit withstand capability IPwith max. backup fuse (r.m.s.) | 1.5 kA |
| Ambient conditions | |
| Degree of protection | IP20 |
| IP20 | |
| Ambient temperature (operation) | -40 °C ... 85 °C |
| Air clearances and creepage distances | |
| Standards/regulations | DIN VDE 0110-1 / IEC 60664-1 |
| Standards | |
| Standards/regulations | IEC 61643-1 |
| EN 61643-11/A11 | |
| NF C61-740 | |
| IEC 61643-1 | |
| EN 61643-11/A11 | |
| UL 1449 | |
| NF C61-740 | |
| Standards/specifications | IEC 61643-1 |
| Note | 2005 |
| Standards/specifications | EN 61643-11/A11 |
| Note | 2007 |
| Standards/specifications | UL 1449 |
| Mounting type | DIN rail: 35 mm |
| Title: | Size: | Type: |
|---|---|---|
| Datasheet 1: 2858357 - PT 2-PE/S-230AC/FM | 617 Kbytes |
![]() |
| Datasheet 2: 2858357 - PT 2-PE/S-230AC/FM | 182 Kbytes |
![]() |
| Complete catalogue 1: 2858357 - PT 2-PE/S-230AC/FM | 12 Mbytes |
![]() |
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.