No products
Product successfully added to your shopping cart
View larger
PT 4-PE/S-230AC-ST 2882462 PHOENIX CONTACT Type 3 surge protection plug
PT 4-PE/S-230AC-ST
2882462
PHOENIX_CONTACT
Type 3 surge protection plug
Type 3 arrester replacement plug (device protection) for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE).
Home > PHOENIX CONTACT
Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Best sellers
▲More info
▲| Product type | Device protection |
| Type | Male |
| Number of positions | 4 |
| Surge protection fault message | optical |
| Arrester can be tested with CHECKMASTER from software version: | From SW rev. 3.2 |
| IEC test classification | III |
| T3 | |
| EN type | T3 |
| Connection method | Screw connection (in connection with the base element) |
| Dimensional drawing |  |
| Width | 35.4 mm |
| Height | 45 mm |
| Depth | 52 mm |
| Horizontal pitch | 2 Div. |
| Complete module width | 35.4 mm |
| Complete module height | 90 mm |
| Complete module depth | 65.5 mm |
| Flammability rating according to UL 94 | V0 |
| Housing material | PA 6.6 |
| Direction of action | 3L-N & N-PE |
| Nominal frequency fN | 50 Hz |
| 60 Hz | |
| Maximum continuous voltage UC | 335 V AC (255 V AC / N-PE) |
| Maximum continuous operating voltage UC(L-N) | 335 V AC |
| Maximum continuous operating voltage UC(N-PE) | 255 V AC |
| Rated load current IL | 26 A (30 °C) |
| Residual current IPE | ≤ 2.5 µA |
| Nominal discharge current In(8/20) µs (L-N) | 1.5 kA (per channel) |
| Nominal discharge current In(8/20) µs (L-PE) | 1.5 kA (per channel) |
| Nominal discharge current In(8/20) µs (N-PE) | 1.5 kA |
| Maximum discharge current Imax(8/20) µs (L-N) | 4.5 kA (10 kA/N-PE) |
| Maximum discharge current Imax(8/20) µs (L-PE) | 4.5 kA |
| Maximum discharge current Imax(8/20) µs (N-PE) | 10 kA (N-PE) |
| Voltage protection level Up(L-N) | ≤ 1.2 kV |
| Voltage protection level Up(L-PE) | ≤ 1.5 kV |
| Voltage protection level Up(N-PE) | ≤ 1.5 kV |
| Residual voltage at In | ≤ 1.2 kV |
| Response time tA(L-N) | ≤ 25 ns |
| Response time tA(L-PE) | ≤ 100 ns |
| Response time tA(N-PE) | ≤ 100 ns |
| Max. required back-up fuse | 25 A (gL) |
| 25 A (MCB B/C) | |
| Short-circuit withstand capability IPwith max. backup fuse (r.m.s.) | 1.5 kA |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -40 °C ... 85 °C |
| Air clearances and creepage distances | |
| Standards/regulations | DIN VDE 0110-1 / IEC 60664-1 |
| Standards | |
| Standards/regulations | IEC 61643-1 |
| EN 61643-11/A11 | |
| UL 1449 | |
| Standards/specifications | IEC 61643-1 |
| Note | 2005 |
| Standards/specifications | EN 61643-11/A11 |
| Note | 2007 |
| Standards/specifications | UL 1449 |
| Note | ed. 2 |
| Mounting type | on base element |
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| Datasheet 1: 2882462 - PT 4-PE/S-230AC-ST | 166 Kbytes |
 |
| Complete catalogue 1: 2882462 - PT 4-PE/S-230AC-ST | 12 Mbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.