FLT 100 N/PE-1.5 2800303 PHOENIX CONTACT Lightning arrester with encapsulated N-PE spark gap, single-channel.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

FLT 100 N/PE-1.5 2800303 PHOENIX CONTACT Lightning arrester with encapsulated N-PE spark gap, single-channel..

FLT 100 N/PE-1.5

2800303

PHOENIX_CONTACT

Available

Ship on today

Lightning arrester with encapsulated N-PE spark gap, single-channel. Housing width: 35 mm (2 pitches)

More details


Overvoltage Protection Over Voltage

TRABTECH Power and Signal Quality - PHOENIX CONTACT

Surge protection - PHOENIX CONTACT

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

Quantity Price
1+$226.72
2+$219.69
3+$216.32
4+$214.35
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info



Dimensions

Height90 mm
Width35.6 mm
Depth71.2 mm
Horizontal pitch2 Div.

Ambient conditions

Degree of protectionIP20 (only when all terminal points are used)
Ambient temperature (operation)-40 °C ... 80 °C
Ambient temperature (storage/transport)-40 °C ... 80 °C
Altitude≤ 2000 m (amsl (above mean sea level))
Permissible humidity (operation)5 % ... 95 %
Shock (operation)25g (half sinus / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)5g (5 - 500 Hz/2.5 h/X, Y, Z)

General

Standards/specificationsIEC 61643-11 2011
EN 61643-11 2012
IEC test classificationI
T1
EN typeT1
IEC power supply systemTN-S
TT
Lightning protection classI
SPD designVoltage-switching type
Mode of protectionN-PE
Mounting typeDIN rail: 35 mm
Colorjet black RAL 9005
Housing materialPBT
Pollution degree2
Flammability rating according to UL 94V-0
TypeDIN rail module, two-section, divisible
Number of positions1
Surge protection fault messageNone

Protective circuit

Nominal voltage UN240 V AC (TN - only N-PE)
240 V AC (TT - only N-PE)
Nominal frequency fN50 Hz (60 Hz)
Maximum continuous voltage UC260 V AC
Rated load current IL125 A (< 55 °C)
Residual current IPE≤ 0.01 mA
Impulse discharge current (10/350)˽µs, charge50 As
Impulse discharge current (10/350)˽µs, specific energy2500 kJ/Ω
Impulse discharge current (10/350)˽µs, peak value limp100 kA
Follow current interrupt rating Ifi100 A (260 V AC)
Voltage protection level Up≤ 1.5 kV
Residual voltage Ures≤ 1.5 kV (at In)
≤ 1 kV (at 10 kA)
≤ 0.9 kV (at 5 kA)
≤ 0.8 kV (at 3 kA)
Front of wave sparkover voltage at 6 kV (1.2/50) µs≤ 1.5 kV
TOV behavior at UT1200 V AC (200 ms / withstand mode)
Response time tA≤ 100 ns

Connection data

Connection methodScrew terminal blocks
Conductor cross section flexible min.2.5 mm²
Conductor cross section flexible max.25 mm²
Conductor cross section solid min.2.5 mm²
Conductor cross section solid max.35 mm²
Conductor cross section AWG13 ... 2
Screw threadM5
Tightening torque4.5 Nm
Stripping length18 mm

UL specifications

SPD Type4CA
Maximum continuous operating voltage MCOV (N-G)264 V AC
Mode of protectionN-G
Power distribution system1S
Nominal frequency50/60 Hz
Measured limiting voltage MLV (N-G)1080 V
Nominal discharge current In (N-G)20 kA
Follow current (N-G)200 A (264 V AC)

Datasheet - PDF

Title: Language: Size: Type:
PHOENIX CONTACT-2800303-FLT 100 N/PE-1.5 English 125 Kbytes PHOENIX CONTACT-2800303-FLT 100 N/PE-1.5

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.