IB IL 24/48 DOR 2/W-XC-PAC 2701214 PHOENIX CONTACT Inline terminal View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

IB IL 24/48 DOR 2/W-XC-PAC 2701214 PHOENIX CONTACT Inline terminal

IB IL 24/48 DOR 2/W-XC-PAC

2701214

PHOENIX_CONTACT

Inline terminal

More details


I/O

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

More info



Key Commercial Data

Orderkey2701214
Packing unit1 pc
NoteMade to Order (non-returnable)
Catalog pagePage 157 (C-6-2017)
GTIN4046356727792
Weight per Piece (excluding packing)63.000 g
Custom tariff number85389091
Country of originDE (Germany)

Note

Utilization restriction1

Dimensions

Dimensional drawing
Width12.2 mm
Height119.8 mm
Depth71.5 mm
Note on dimensionsHousing dimensions

Ambient conditions

Ambient temperature (operation)-25 °C ... 55 °C (Standard)
-40 °C ... 70 °C (Extended, see section “Tested successfully: use under extreme ambient conditions” in the data sheet.)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Permissible humidity (operation)10 % ... 95 % (according to DIN EN 61131-2)
Permissible humidity (storage/transport)10 % ... 95 % (according to DIN EN 61131-2)
Air pressure (operation)70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protectionIP20

General

Mounting typeDIN rail
Net weight63 g
Note on weight specificationswith connector
Operating modeProcess data mode with 2 bits

Interfaces

DesignationInline local bus
No. of channels2
Connection methodInline data jumper
Transmission speed500 kbps

Inline potentials

DesignationCommunications power (UL)
Supply voltage7.5 V DC (via voltage jumper)
Current consumptionmax. 30 mA
Power consumption0.23 W

Digital outputs

Output nameRelay output
Output descriptionSPDT relay contact
Connection methodSpring-cage connection
Number of outputs2 (floating contacts)
Nominal output voltage24 V AC
48 V DC
Maximum output current per channel2 A
Maximum output current per module4 A

Relay outputs

Switching currentmin. 10 µA
2 A (30 V DC)
1 A (60 V DC)
Switching capacity60 W
62.5 VA (ohmic)
Limiting continuous current2 A (at maximum ambient temperature)
Contact type2 floating PDT contacts
Switching voltagemin. 10 mV (DC)
max. 30 V AC (PELV (EN 61131))
max. 60 V DC (PELV (EN 61131))
Switching currentmin. 10 µA
2 A (30 V DC)
1 A (60 V DC)
Switching capacity60 W
Mechanical service life2x 105cycles

Electrical isolation

Test sectionRelay contact / Bus logics 1.5 kV 50 Hz 1 min.
Contact/contact 1 kV 50 Hz 1 min.
Contact / PE 1 kV 50 Hz 1 min.

Standards and Regulations

Protection classIII, IEC 61140, EN 61140, VDE 0140-1

Environmental Product Compliance

China RoHSEnvironmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values

Classifications

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.